Category Archives: Controller – Brushed
Motion Control Application – Congratulations to Emirates Team New Zealand – Winner of the 36th America’s Cup!
Motion Control Application – Motors
They have gone and done it again. Emirates Team New Zealand have retained the America’s Cup over the Italian Challenger Luna Rossa Prada Pirelli.
Taunton, MA — Motion Control Products – maxon Group extend their heartfelt congratulations to Emirates Team New Zealand. In the historical 36th America’s Cup that endured extra challenges including Covid-19, race cancellations and delays meaning interruptions and last-minute tactical changes, the Kiwis have retained the oldest trophy in international sporting history.
Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!
Motion Control – ATTENTION – Ventilator Manufacturers!
Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond.
Electromate is a mechanical ventilator component supplier and works with a number of manufacturing partners that supply crucial components needed to build more ventilators.
These include:
- HMI’s
- Linear guides
- Linear actuators
- Screw assemblies
- Compact gearboxes
- High efficiency servo & stepper motors
- Programmable motion controllers and drives
Our team of motion design experts are located all across Canada and are available right now to help you with any electro-mechanical ventilator design. If you are working on a ventilator involving rotary, linear, or any other motion, we will provide immediate help with electro-mechanical engineering and component sourcing. Contact us today.
We are already working with ventilator and respirator companies and encourage any other businesses working on COVID-19 solutions to reach out to us.
All inquiries regarding ventilator components or any other equipment to help battle COVID-19 are given utmost priority. We can help to optimize your design quickly and provide fast turnaround proposals as requested. Additionally, we are able to meet high production demands in a very short time by utlilizing ‘Medical Fast Track Programs’ -info.us@maxongroup.com from maxon, and other vendors.
Many of the products we sell to the medical technology sector have ISO 13485 certification. This certification confirms that these products adhere to the fundamental requirements of medical technology and that all processes and procedures are documented, thereby guaranteeing traceability.
In addition to helping with the design and acquisition of critical components used in ventilators and respirators, we also want to make you aware of initiatives that you may be able to utilize. Please read below to learn more about these programs and how you can assist with the COVID-19 cause.
CODE LIFE VENTILATOR CHALLANGE
The Montreal General Hospital Foundation, in collaboration with the Research Institute of the McGill University Health Centre (RI-MUHC), is launching a global innovation challenge, backed by a prize of $200,000 CAD. They are calling for teams to design a simple, low-cost, easy-to-manufacture and easy-to-maintain ventilator which could be deployed anywhere needed to save lives.
To learn more, please visit https://www.mghfoundation.com/en/news/code-life-ventilator-challenge/
MIT EMERGENCY VENTILATOR (E-VENT) PROJECT COPY
MIT has launched an emergency research project with a team of Engineers and American clinicians to address the question:
Is it possible to safely ventilate a COVID-19 patient by automatically actuating a manual resuscitator?
Their process in approaching this question is to first identify the minimum requirements for a low-cost ventilator, based on the collective wisdom of many clinicians, design against these requirements, conduct immediate testing, report the results, iterate and facilitate discussion.
To learn more, please visit https://e-vent.mit.edu/
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/
For more information on the “Best Place to Work”CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://Catalogs-MotionControl.com
http://MotionControlMarketing.com
Motion Control – Maxon’s New EPOS Programmable Smart Drive/Controller – “Positioning Made Easy” are Available from Electromate!
Motion Control – Miniature Drive/Controller
Vaughan, Ontario, Canada — Motion Control Components — EPOS is a modular, digital positioning controller by maxon motor. It is suitable for controlling permanent magnet-activated motors with encoders in a range of 1 to 1050 W continuous output power. The wide range of operating modes, as well as various command interfaces, make it versatile for use in many different drive systems in the fields of automation technology and mechatronics
With the EPOS4 Compact 50/8 EtherCAT and EPOS4 Compact 50/15 EtherCAT, maxon launches the first compact devices compatible with the fast industrial Ethernet connection EtherCAT. The fully integrated, plug-and-play positioning controller in a compact design is perfectly suited for use in networks with cycle times up to 1 ms.
Powerhouse with excellent control characteristics
The functionality, operation, software, and accessories of the new controllers are derived directly from existing products in the EPOS4 range. The devices are suitable for use with both brushed DC and brushless EC motors (BLDC) and come with comprehensive feedback options such as Hall sensors, as well as incremental and SSI absolute encoders. State-of-the art concepts such as FOC, feed forward, and observer control allow optimal control in a wide variety of applications.
Comprehensive functional scope and easy operation
The existing digital and analog inputs and outputs are freely configurable and ideally matched to the numerous functions and operating modes of CiA-402 positioning controllers. Products are set up using the EPOS Studio graphical user interface (Version 3.4 and higher) for Windows PCs. In addition to the intuitive commissioning software, Windows DLL and Linux Shared Objects libraries are freely available to make integration into a wide variety of master systems as easy as possible.
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/
For more information on the “Best Place to Work”CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://Catalogs-MotionControl.com
http://MotionControlMarketing.com
Motion Control – Electromate Announces 6 New Servo Drives capable of 100A peak and 60A continuous output!
Motion Control – Servo Drives
 |
This new power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more …
Vaughan, Ontario, Canada — Motion Control — This new power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more. Safe Torque Off (STO) functionality is included as a standard feature. Available now, these new models offer high efficiency in a compact design and are targeted towards AGVs and mobile applications
Specifications:
- 100 A Peak Current Output
- 60 A Continuous Current Output
- 20 – 80 VDC Supply Voltage
- Safe Torque Off (STO) standard
- High Efficiency
- Compact Design
Information on the 6 new servo drives from Advanced Motion Controls can be found at the links below:
DPCANIA-100B080 (CANopen)
DPCANIE-100B080 (CANopen)
DPEANIU-100B080 (EtherCAT)
DPMANIU-100B080 (Click&Move® Embedded)
DPPANIU-100B080 (POWERLINK / Modbus TCP / Ethernet)
DPRANIE-100B080 (Modbus RTU / RS485)
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Google+: https://plus.google.com/104057418684128701566
Blog: https://electromate.wordpress.com/
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
|
 |
 |
 |
Motion Control – Maxon Launches Additional EtherCAT Motion Controllers!
Motion Control – Maxon Motor – “The EPOS4 product family is now complete.”
 |
Fall River, MA — Motion Control Components – With the EPOS4 series, maxon is offering a reliable and extremely versatile platform of high-performance motion controllers. It addresses the needs of system integrators and fulfills the requirements of a variety of applications, such as industrial automation, apparatus engineering, and robotics. The platform is now being complemented with two new Compact EtherCAT models.
The highly successful EPOS4 positioning controllers made by maxon motor are scalable and consistently support a uniform set of functionalities and connection options. Modularity with different designs (module, compact, or encased version) ensures optimal integration in a wide variety of applications. The controllers offer excellent dynamic properties, control quality, and power density while requiring only minimal installation space. In addition, their automatic controller setting makes them ideally suited for easy control of both brushless (BLDC) and brushed DC motors.
Now with dual loop control
Maxon is expanding its family of EPOS4 products with two new EtherCAT Compact controllers (24/1.5 and 50/5). At the same time, maxon is upgrading the capabilities of the entire platform by enabling dual loop control. Dual loop control simultaneously controls motor and load feedback for optimum performance within the system. The EPOS Studio software ensures the minimum possible set-up times with its automatic Regulation Tuning feature.
Condition monitoring for added value
However, the EPOS4 has many additional capabilities: for example, the controller continuously delivers hundreds of data points about the drive system for online condition monitoring and transmits this data to a higher-level system via CANopen or EtherCAT in real time. This supports complex predictive maintenance systems that anticipate impending failures to avoid costly repairs, resulting in higher productivity and lower cost.
For more information about our EPOS controllers, please visit epos.maxonmotor.com
Contact maxon for more details info@maxonmotorusa.com
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
For other Motion Control Components, Applications, and Technology from Maxon visit The ORIGIONAL: http://MotionControlBuyersGuide.com
|
 |
 |
Low Cost 4 Axis Servo Controller for High Speed, Low Inductance Motors Available from Moticont!
 |
Van Nuys, CA – Motion Control Components – The MOTI-1100 Series of Motion Controllers from Moticont is the latest generation of motion controllers. The MOTI-1100 Series controller incorporates a highly efficient PWM motor driver. The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. It utilizes a 64-bit DSP processor with latest FPGA technology for required extensive calculations.
This compact, low cost, plug-and-play multi-axis servo motion controller is supplied with power supplies, servo motor drivers, USB cable and free control panel software. The user friendly software allows for quick set-up and operation. It can be controlled using a Micro-Controller, PLC and PC using a popular programming language such as C/C++, Visual Basic, LabVIEWTM, or MatlabTM.
This controller series can support up to four axis of motion. Modes of motion include coordinated motion, point-to-point positioning, and jogging.
About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.
Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.
We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.
For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com
|
 |
 |
 |
Multi-axes Motion Control Systems with IntelLiGent Actuators from IntelLiDrives!
INTELLIGENT ACTUATORS are highly programmable, integrated actuators with a motor, encoder, amplifier, controller, USB communication, and IOs.
 |
Philadelphia, PA, — Motion Control Components and Systems – These stages come fully pre-configured and enable true out-of-the box controls. They are perfect for the confines and requirements of the laboratory and are also applicable for use in manufacturing environments. Rotary stages incorporate precision worm-gear drive mechanism and bearing components for accurate positioning performance over the lifetime of the product. Linear actuators are fitted with ball screws and linear ball bearings for accuracy and repeatability in precision applications.
INTELLIGENT ACTUATORS are member of the Compact Positioning Stages family of linear, rotary, XY and vertical lift stages. Two or more stages can easily be mounted together in numerous combinations using adapter plates and brackets.
INTELLIGENT ACTUATORS can easily “talk over” USB 2.0, Ethenet, RS232, RS485 interfaces and come with powerful yet easy to use software packages. for system start-up and integration, like communication drivers, linkable DLL libraries, National Instruments Labview drivers and VI examples, GUI and easy-to-use DXF conversion software.
About IntelLiDrives —
IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.
For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives atsales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us
|
|
One to Three-axis Stand-alone Automation – Motion Control Systems for Any Combination of Servos or Steppers!
Low Cost, Plug-and-Play, One to Three-axis Stand-alone Motion Control Systems for Any Combination of Servos or Steppers from OES!
 |
Van Nuys, CA -Motion Control System – The Sonata series of motion control systems from Optimal Engineering Systems (OES) is a stand-alone, easy-to-use, plug-and-play, cost effective solution for motion control applications. The systems in this series support up to 3 axes of motion, in any combination of steppers, DC servo and brushless servo motors, and voice coil motors.
Each system includes the power supplies, the motion controller, the micro-stepper and/or servo motor drivers. The operator interface terminal makes the system totally stand-alone and allows the operator to interact with the motion controller without needing an additional PC. The system can also be operated using an analog joystick or a trackball. The speed of the motor is proportional to the tilt angle of the joystick or the rotational speed of the trackball. Using the 4-line LCD and 32 button keypad, the user can enter motion parameters and select different modes of operation.
Power supply options include: 115 or 230 VAC (standard) and 12 VDC to 80 VDC (Optional). The power supply will be selected to meet the customer’s requirements. The available wattages are 80 W, 160 W, 240W, 400 W and 500 W. Options available for these Plug-and-Play systems include, motors, encoders, drivers, and cabling. Measuring just 10.0 in. (265 mm) x 10.8 in. (265 mm) x 4.875 in. (124 mm), or in a 19 inch (482.6 mm) rack mount enclosure, the Sonata motion control systems are easy to install.
About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders
Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.
For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, 
+1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website athttp://www.oesincorp.com
|
 |
 |
 |
 |
Motion Control – EPOS4 Position Controller, Compact Power for Your Motion Control Application!
Maxon motor’s EPOS range of controllers has been very successful in the marketplace. Since its launch in 2005, more than 100,000 units are in use worldwide. To build upon this success, the Swiss drive specialist launches the EPOS4 as the next generation of positioning controllers.
 |
Fall River, MA — Motion Control – The first product in maxon’s new line is the high-performance EPOS4 module with detachable pin headers and two different power ratings. With a connector board, the modules can be combined into a ready-to-install compact solution. The position controllers are suitable for efficient and dynamic control of brushed DC motors and brushless BLDC motors (EC motors) with Hall sensors and encoders up to 750 W continuous power and 1500 W peak power.
More performance and additional functionality
The Swiss drive specialists at maxon motor has equipped its product offering of CANopen positioning motor controllers with even more power, better control performance, and additional functionalities. The modular concept also provides for a wide variety of expansion options with Ethernet-based interfaces, such as EtherCAT or absolute rotary encoders. All these innovations are based on the successful principle of our Easy to use POsitioning System.
The combination of a wide variety of operating modes and state-of-the-art control characteristics like Field Oriented Control (FOC) with multiple analog and digital I/O along with various command options enables applications in a large number of fields from medical technology to robotics. As always, maxon relies on integrated protective devices like the Safe Torque Off (STO) functionality.
Intuitive parameterization!
Start-up and parameterization are performed with an advanced, intuitive graphical user interface called “EPOS Studio” and user-friendly menu-controlled wizards. A sophisticated automatic process for controller tuning has also been part of the package for years. Customers are free to fully dedicate themselves to their real task – developing their devices. Motor control becomes a secondary concern, as the EPOS comes with maxon’s comprehensive know-how in drive technology. Together with the three freely available libraries and programming examples, this makes the integration in a wide variety of systems very easy.
Up to 98% efficiency
All these characteristics are combined with a large input voltage range of up to 50 VDC, extremely high power density, and up to 98% efficiency. This makes EPOS4 position controllers the first choice for your drive application.
For more information on the EPOS position controller series of maxon motor, please see http://epos.maxonmotor.com
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website atwww.maxonmotor.com.
|
|
 |
Motion Control – CANopen Motor Controllers for Electric Mobility and Vehicular Applications!
 |
Greenville, DE — — Motion Control – The DVC series motor controllers from Advanced Motion Controls are digital four-quadrant servo drives purpose-designed and built to operate today’s modern mobile electric vehicular platforms. Providing high power from battery supplies, the DVC series features a compact design, IP65 construction and multiple operating modes for controlling either permanent magnet brushed or brushless motors. Whether for traction / propulsion, steering, lifting or any other electrically driven actuation, the DVC series is the newest member in a long line of successful motor controlling solutions from Advanced Motion Controls.
The ability to maximize battery life and extend vehicle operations, essentially running ‘lean and mean’, is the key to keeping a vehicle operating at peak performance. With unmatched power density, high efficiency, low weight, cool thermal operation and regen all built in, selecting the DVC series is the obvious choice.
The DVC Series motor controllers operate in torque, velocity, or position mode and provide high power from battery supplies with multiple operating modes for either 3Φ (servo, closed loop vector, or closed loop stepper) or 1Φ motors. The DVC Series communicate over CANopen and are configured with AMC’s DriveWare® 7 configuration software.
Specific applications include: mobile robots, AGV’s, UGV’s, material handling and transport vehicles in both industrial and military environments.
More information on the DVC series motor controllers available from Servo2Go.com can be viewed at:https://www.servo2go.com/search.php?search=DVC2&D=PROD
These and other Motion Control Products are available through www.Servo2Go.com
For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com
|
 |
 |
 |
One to Three-axis Stand-alone Automation – Motion Control Systems for Any Combination of Servos or Steppers!
|
Van Nuys, CA -Automation Motion Control System – The Sonata series of motion control systems from Optimal Engineering Systems (OES) is a stand-alone, easy-to-use, plug-and-play, cost effective solution for motion control applications. The systems in this series support up to 3 axes of motion, in any combination of steppers, DC servo and brushless servo motors, and voice coil motors.
Each system includes the power supplies, the motion controller, the micro-stepper and/or servo motor drivers. The operator interface terminal makes the system totally stand-alone and allows the operator to interact with the motion controller without needing an additional PC. The system can also be operated using an analog joystick or a trackball. The speed of the motor is proportional to the tilt angle of the joystick or the rotational speed of the trackball. Using the 4-line LCD and 32 button keypad, the user can enter motion parameters and select different modes of operation.
Power supply options include: 115 or 230 VAC (standard) and 12 VDC to 80 VDC (Optional). The power supply will be selected to meet the customer’s requirements. The available wattages are 80 W, 160 W, 240W, 400 W and 500 W. Options available for these Plug-and-Play systems include, motors, encoders, drivers, and cabling. Measuring just 10.0 in. (265 mm) x 10.8 in. (265 mm) x 4.875 in. (124 mm), or in a 19 inch (482.6 mm) rack mount enclosure, the Sonata motion control systems are easy to install.
About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders
Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.
For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website athttp://www.oesincorp.com
|
|
|
|
|
Motion Control – AMC’s Family of Servo Amplifiers!
|
Greenville, DE –— Motion Control – Advanced Motion Controls (AMC) is a world leading servo drive manufacturer providing solutions for motion control. Today, servo drives are an essential part of motion control systems, and AMC servos are an excellent foundation for high performance. Advanced Motion Controls has become synonymous with servo solutions that are reliable, cost-effective, customer specified and delivered on time.
Currently, AMC offers hundreds of standard servo drive and amplifier models, accept various command signals, communicate over several networks and operate in many different modes. For instance, the digital product line supports several different interface options including: analog input, step and direction, encoder following, RS-232/485, CANopen or SynqNet™. These same interfaces can be found on servo drives with power output capabilities ranging from 20W up to 40KW of peak output!
Available AMC Products by Network connections (centralized or distributed servo systems):
- CANopen
- RS232, RS485
- EtherCAT
- EPL
- Ethernet PowerLink
- SynqNet
We also have technology to support the following interfaces: DeviceNet, Ethernet TCP/IP, FireWire, Profibus, USB, Universal Serial Bus and Sercos.
Products include:
- Brush DC Servo Drives
- Trapezoidal Brushless Servo Drives
- Digital Input Sinusoidal Brushless Servo Drives
- Analog Input Sinusoidal Brushless Servo Drives
- PWM Input Servo Drives
- CANopen Brushless Servo Drives
- SynqNet Brushless Servo Drives
- Single Phase Input Models
- Power Supplies & Accessories
- PCB mounted Extended Environment Models available in both digital and analog varieties
The family of AMC’s Servo Amplifiers can be viewed at: https://www.servo2go.com/supplier.php?id=1031080098
These and other Motion Control Products are available through www.Servo2Go.com
For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 FREE or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com
|
|
|
|
Motion Control Made Easy Using Maxon EPOS Controllers!
EPOS2 Positioning Controllers support additional Platforms.
|
Fall River, MA -Motion Control – The maxon motor EPOS2 motion controllers for DC brushed and brushless motors are enhanced by even more possible fields of applications. Deployment of computer-based drive motion control rather than traditionally used PLC systems are becoming more and more prevalent in practice. To stay ahead of this trend, maxon has updated the EPOS2 libraries to support CANopen interfaces from Kvaser and NI-XNET, in addition to our existing solutions (NI, IXXAT, Vector). In additon, new opportunities unfold for computer platforms with serial communication via USB or RS232 under Windows or Linux. The existing libraries for Intel/AMD (Windows 32/64-Bit, Linux 32-Bit) are further extended with a Linux 64-Bit version. Additional support of 32-Bit ARMv6/v7 solutions allows the broad scale use of trend platforms, such as Raspberry Pi or BeagleBone. True to the principle “Easy-to-use POsitioning System”, simple and fast incorporation into a wide range of solutions with extended, no cost, libraries is supported.
With today’s controller architectures a variety of motion control components from various suppliers are used. Therefore, easy integration into the superior master system plays a crucial role in the success. By means of extensively documented maxon libraries, integration of EPOS2 slave drive controllers takes no time and makes elaborate interface programming obsolete. Customers can fully focus on their main task; the development of their application. A wide range of supported systems permit a selection of the ideally suited master.
For more information on EPOS, maxon motor’s modular positioning controller series, visit http://epos.maxonmotor.com.
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
|
|
Motion Control – Maxon’s High-Performance MAXPOS 50/5 Controller!
Motion Control- Maxon motor launches the MAXPOS 50/5. This compact EtherCAT Slave unveils unprecedented possibilities as far as precision, dynamics, and synchronization are concerned. It also ensures reliability and durability even under harsh conditions. More than 20 years of experience in motion control have been incorporated into this latest technology in positioning controller.
|
Fall River, MA — Motion Control Controller – By their design, the ironless maxon DC brushed motors and brushless (maxon EC) motors are ideal for applications demanding high dynamics and longevity. Typical areas are robotics and applications in the medical industry or in specialized machine manufacturing. In the past when particularly high requirements were called for, the controller used or its limited integration capabilities to the master occasionally imposed limitations due to its inability to keep pace with the high dynamics of the motors. With the new MAXPOS 50/5 motion controller, these core motor properties can now be ideally utilized. Thanks to the latest FPGA (Field Programmable Gate Array) technology, highest control cycle rates can be achieved with minimally short cycle times at the same time. For trajectory planning, sophisticated motion control tasks with a current controller clock speed of 100 kHz and an effective communication cycle time of 100 μs can be achieved with a suitable EtherCAT master. Distributed Clocks Support as well as the endorsement of CoE (CAN Application Layer over EtherCAT) with «Cyclic Synchronous Modes» perfectly suit these purposes. As an alternative, profile-based operating modes for position and velocity are also available. In addition, the outstanding processing power provides field-oriented sinus commutation of brushless motors (maxon EC) up to a speed of 200,000 rpm.
Full connectivity
A multitude of feedback possibilities permit the use of a wide range of permanent magnet-activated DC motors with encoder and brushless motors (maxon EC) with digital Hall sensors and encoders up to 250 Watts. The wide supply voltage range from 10 to 50 VDC and the output power capability of 5 A continuous and 15 A peak current opens a broad application field. Two different encoders can be used simultaneously allowing for dual loop control of the master to compensate for mechanical backlash and elasticity of the drive system. This is ideal for applications with high demand on precision. The spectrum ranges from digital incremental encoders to analog sinus-cosinus incremental encoders up to absolute encoders with SSI, EnDat2.2, or BiSS-C interface. Of course, also galvanically isolated I/Os are on board to enable integration of diverse peripheral components, such as limit or reference switches.
All-around protection and easy operation
The MAXPOS 50/5 positioning controller also comes with extensive protective circuitry against overcurrent, excess temperature, undervoltage and overvoltage, voltage transients, short-circuits in the motor cable as well as loss of feedback signal. Motor and load can be optimally protected with adjustable current limiting.
The newly designed operating concept for the graphical user interface «MAXPOS Studio» together with well-established tools, such as Startup Wizard or automated Regulation Tuning ensures easy and intuitive commissioning. Additional aids include the Diagnostic Wizard for troubleshooting or a freely-configurable data recorder to plot various process data. Plus, to assist the customer in attaining the ideal matched drive system in the shortest possible time, a comprehensive document is provided. The entire configuration can be carried out via USB or Ethernet.
Use the Bar Code of go to http://maxpos.maxonmotor.com or more details on MAXPOS 50/5, the new high-performance positioning controller.
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
New Advanced Motion Controller from Steinmeyer!
 |
BURLINGTON, MA — Steinmeyer, Inc. today announced a small new point to point controller to complement its line of precision linear stages. The new FMC200 series controller offers a compact design that is able to support a wide range of motors including Linear Brushless, DC Brush and Stepper Motors. Up to 3 axes can be controlled from a single unit that measures only 100x100x25 mm. Input power, ranging from 9 to 36 VDC, depends on the motors to be controlled. Open loop as well as closed loop control is possible. Maximum input quadrature encoder frequency is 10 MHz.
The controller is preconfigured for easy installation with an individual configuration file and our simple to use Windows software called FMC Quick Access. With just a few clicks this intuitive software allows you to run start up tests within a couple of minutes!
The new FMC200 series controller comes with a software package that includes LabView libraries. Other libraries such as C++, C#, Visual Basic, Delphi and more are also available. If your application requires a multi axis setup with more than 3 axes, simply connect a second FMC controller via our FMC-Link and add as many ports as needed. Stand alone operation is possible with stored motion sequences. The controller, able to interface with an external joystick and limit switches, also includes extra I/O ports.
The Steinmeyer group is comprised of two manufacturing divisions located in Germany. August Steinmeyer GmbH & Co. KG (located in Albstadt) has been setting standards for high precision ball screws for over 40 years and prides itself on high quality, innovative designs to meet demanding customer requirements. Our Feinmess Dresden (FMD) division has been producing an extensive line of high precision positioning systems for well over 130 years.
For further information on Steinmeyer our extensive product portfolio, call 1-781-273-6220 or e-mail John Skaltsas at jskaltsas@steinmeyer.com or visit the Steinmeyer FMD group at: www.steinmeyer.com
Motion Control – 2 & 4 Axis Controllers for Brushed, Brushless, and Steppers in Any Combination!
 |
San Luis Obispo, CA — Motion Cotrol – The Trust Automation TA600 Standalone Motion Controller continues Trust Automation Inc.’s tradition of motion control innovation. The TA600 is a two or four axis motion controller for any combination of brushed, brushless or stepper axis control. The advanced dual processor design optimizes performance by splitting the tasks between command execution and host communication and general I/O. This advanced design delivers peak performance while reducing your development time and shortening your time to market. This motion controller is flexible and feature rich, suitable for most medium to high end applications.
FEATURES
• 24V DC power
• Four servo control axes
• Integrated emergency stop circuitry
• 4 high speed position capture inputs
• USB 2.0 setup and diagnostics interface
• Quadrature or +/-10V DC analog feedback
• User I/O – 8 digital outputs, 14 digital inputs
• Stepper control without feedback, open loop
• Dual DAC’s per axis for sinusoidal motor control
• Trapezoidal, SCurve, velocity and custom moves
• Application specific parameters stored in EEPROM
• Brushed, brushless, stepper control with feedback, closed loop
• Dedicated I/O – positive, negative and home sensors for each axis
• Point to point, multi axis interpolated, circular interpolated move
APPLICATIONS
• Semiconductor processing equipment
• Material handling systems
• Packaging equipment
TECHNICAL SPECIFICATIONS
Electrical………………………..
Minimum Supply Voltage………………..20VDC
Nominal Supply Voltage…….24VDC
Maximum Supply Voltage…………28VDC
Minimum Supply Current…………………………….0.5A
Maximum Supply Current……………………………6.0A (fused)
5V Supply Current Output………………………800mA
12V Supply Current Output…………………….50mA
-12V Supply Current Output……………………50mA
Environmental……………………..
Maximum Altitude …………………………..6,560 ft (2000M)
Temperature (ambient)………..
Normal operation: 0OC to +40OC
Storage: -20OC to +80OC
Humidity………………………….
Operating: 10% to 70% , non-condensing
Storage: 10% to 90% , non-condensing
Protection Level……………………Not Water Resistant
Mechanical …………………
Length……………7.375 in. (18,73 cm)
Width……………1.500 in. (3,81 cm)
Height……………8.125 in. (20,643 cm)
Weight……………2 lbs (.91 kg)
Mounting……………………….Panel
To download Complete Data Sheet – Click Here
Trust Automation, Inc. has focused on developing and manufacturing the highest performance controllers in the motion control market. Our innovative products address the increasing demand for higher performance and simpler machine integration.
Other motion control products available are: Servo Amplifiers, SynqNet I/O and SynqNet Drives, Brushed and Brushless Rotary Motors, Interconnect Products and Automation Engineering consulting covering Mechanical, Electrical, Software and System aspects of machine design.
Since 1990 Trust Automation has provided Smart Solutions in Motion Control and Affordable Customization of motion related products.
For additional information contact David Rennie at Trust Automation, 143 Suburban Road, Bldg 100, San Luis Obispo, CA 93401; Tel: 805-544-0761, Fax: 805-544-4621, E-Mail: info@trustautomation.com or visit the Web site at http://www.trustautomation.com
