Category Archives: Drives – DC
Motion Control – Maxon’s trade show experience goes virtual!
Motion Control – Virtual Trade Show!
Taunton, MA — Motion Control Products – This year, the COVID-19 pandemic has led to the cancellation of nearly all trade shows. Despite this, maxon is offering a digital trade show experience to all of its customers and anyone who’s interested in learning about the latest in drive technology. Visitors to maxon’s virtual booth will discover the benefits of our latest products such as the MiniMACS6 master controller, learn about high torque brushless DC motors as well as flat motors for robotics, and get to know the Mars rover. Visit virtualbooth.maxongroup.com and contact us to get your ideas moving.
Motion Control – 5 challenges an electric motor has to overcome on Mars
Motion Control – Electric motors on Mars
Outer space is unforgiving. This is why precision drives embarking on a trip to other planets need to meet extremely high-quality standards.
Taunton, MA — Motion Control Products – Every Mars drive from maxon is based on a catalog product and is modified for the specific mission. That’s because the DC motors, gearheads, and encoders face brutal conditions during liftoff, the long journey through space, and the mission on the Red Planet. In this blog, I will talk about the properties a drive needs to have to qualify for a journey to Mars.
Motion Control – AMC introduces the FE060-25-EM – FlexPro™ Digital Servo Drive!
Motion Control – Digital Servo Drive
Vaughan, Ontario, Canada — Motion Control Components — Available immediately, the FE060-25-EM is the first servo drive of the new FlexPro™ digital drive family from ADVANCED Motion Controls (AMC). Designed with compact form and power density in mind, the micro-sized FE060-25-EM can outperform larger-sized digital servo drives and still be integrated into tight spaces.
Motion Control – Maxon precision motors Go to Mars AGAIN!
Motion Control – Maxon motors on Mars!
Taunton, MA — Motion Control Products – NASA’s Perseverance rover landed on Mars on February 18th. Was there once life on Mars? This is the question that one of the most complex robotic systems ever built by humankind has set out to answer. Several of maxon’s electric drives are used for handling the soil samples—and to control the first Mars helicopter.
Will NASA, the US space agency, successfully land a fifth rover on Mars, allowing it to start its series of missions to bring Mars soil samples back to Earth? The rover named Perseverance will enter the atmosphere of the Red Planet on February 18th—after traveling a distance of more than 470 million kilometers.
If everything goes according to plan, Perseverance will land in the Jezero Crater, which was once filled with water, to search for traces of earlier life. The rover looks a lot like its predecessor Curiosity, but it is equipped with more sophisticated measuring instruments and systems. One of its tasks will be to take up to 30 soil samples, place each of these in separate containers, seal them and place them on the surface of Mars for retrieval and return to Earth by later missions in which maxon will also be involved. This “Mars Sample Return” project is by far the most complex series of missions in the history of unmanned space exploration.
NASA’s Jet Propulsion Laboratory (JPL) is responsible for Perseverance and is counting on technology from maxon to handle the samples. There are ten electric drives in the rover. These are responsible for moving the robotic arm that navigates the samples from one station to the next. Additionally, the motors are used for sealing the containers and placing them on the surface of Mars.
Drives responsible for mission-critical tasks
Just like the more than 100 existing maxon drives that have been reliably performing their duties on Mars, the motors for Perseverance are based on standard catalog products: specifically, nine brushless DC motors, the EC 32 flat and one of the EC 20 flat motors combined with a GP 22 UP planetary gearhead.
The engineers at maxon closely collaborated with the specialists at JPL for several years to modify and extensively test the drives. The robotic arm on which the BLDC motors are mounted as well as the gripper are critical to the application and the success of the mission.
maxon is also on board the first Mars helicopter
A drone helicopter called Ingenuity is attached to the underside of the rover. Ingenuity is destined to perform the first ever flights on Mars in the history of space exploration. It is solar powered and weighs only 1.8 kilograms. Six brushed maxon DCX motors with a diameter of 10 millimeters control the tilt of the rotor blades, which determines the direction of flight. The drives feature high energy efficiency, are dynamic and very light. “In the development phase, we performed extensive tests to make sure that the motors will work as intended under the extreme conditions on Mars,” says Florbela Costa, project manager for this helicopter at maxon.
With this experiment, NASA wants to test the concept for future drone flights. Flying on Mars is a challenge. The atmosphere is extremely thin, roughly comparable to the conditions on Earth at an altitude of 30 kilometers. The first drone flights are scheduled for May. Space applications only constitute a small portion of maxon’s orders, but the high requirements push maxon to the next level. This is evident in the increased quality standards, as well as new testing methods and processes, which in turn also benefit customers in other areas, such as medical technology. “Apart from this, such space missions are simply incredibly fascinating,” says Eugen Elmiger, CEO of the maxon Group. “Time and time again, I feel honored and proud that our drives are used in these technically groundbreaking Mars missions.”
For additional information Go to:
NASA Pererverance Lander and Helicopter
Five Challanges Electric Motors Most Overcome on Mars
Notes on Photographs
The Perseverance rover and the Mars helicopter Ingenuity. © NASA/JPL-Caltech The Perseverance rover and the Mars helicopter Ingenuity. © NASA/JPL-Caltech
The robotic arm moves the soil samples to the volume assessment and scanning stations, then to the sealing station, and finally into temporary storage—all autonomously. © NASA/JPL-Caltech
The robotic arm moves the soil samples to the volume assessment and scanning stations, then to the sealing station, and finally into temporary storage—all autonomously. © NASA/JPL-Caltech
Left: The modified EC 32 flat drive. Nine of these drives are used in the Perseverance rover. Center: The EC 20 flat with GP 22 UP gearhead. Right: DCX 10 motors move the swashplate, which in turn controls the tilt of the rotor blades of the Mars helicopter. Image credits: maxon
Left: The modified EC 32 flat drive. Nine of these drives are used in the Perseverance rover. Center: The EC 20 flat with GP 22 UP gearhead. Right: DCX 10 motors move the swashplate, which in turn controls the tilt of the rotor blades of the Mars helicopter.
The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.
The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.
About Maxon
The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.
Maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com
This year, the COVID-19 pandemic has led to the cancellation of nearly all trade shows. Despite this, maxon is offering a digital trade show experience to all of its customers and anyone who’s interested in learning about the latest in drive technology. Visitors to maxon’s virtual booth will discover the benefits of our latest products such as the MiniMACS6 master controller, learn about high torque brushless DC motors as well as flat motors for robotics, and get to know the Mars rover. Visit virtualbooth.maxongroup.com and contact us to get your ideas moving.
If you prefer watching an entertaining video introducing all the latest products maxon brought to the market this year, you will find it here: https://youtu.be/Jtw7Hwxbdr4 a> Have fun watching! For more information please contact us at info.us@maxongroup.com or 508-677-0520.
Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
See this and other Motion Control Components from Maxon featured on:
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://Catalogs-MotionControl.com
Motion Control – Maxon drives are heading to the Red Planet with NASA’s Perseverance Rover!
Motion Control – Application – Maxon drives heading to the Red Planet!
In July, NASA will be sending its fifth rover to Mars. Its main mission is to collect soil samples that will be analyzed on Earth at a later time. The rover will also carry a helicopter that will perform the first flights on the Red Planet. maxon’s precision DC and BLDC motors will be used for numerous mission-critical tasks.
Taunton, MA — Motion Control Products & Application – maxon drive systems are very familiar with Mars. Our drives have been used in virtually every successful robotic mission over the last three decades. There are now more than 100 of them on the Red Planet and there are likely to be more soon. The launch window for NASA’s next mission opens on July 22nd. An Atlas V rocket will launch the new Perseverance rover on its way to Mars, where it will be searching for signs of previous life on the planet. Its most important job is to take multiple soil samples, seal them in containers and deposit them on the surface of Mars so that a future mission can return them to Earth. Several maxon motors will be used to handle the samples inside the rover. For example, maxon DC motors are installed in the robotic arm, which moves the samples from station to station. Maxon motors will also be used for sealing and depositing the sample containers.
NASA’s Jet Propulsion Laboratory (JPL), is carrying out the mission, and have asked maxon to produce 10 drives for the rover. As with almost all previous Mars missions, these drives are based on standard products from maxon’s catalog with modifications. For the first time, NASA is using brushless DC motors, including: nine EC 32 flat and one EC 20 flat in combination with a GP 22 UP planetary gearhead. Working closely with JPL specialists, maxon engineers developed the drives over several years and tested them thoroughly to achieve the highest standards of quality. “We’ve learned a lot from this exciting project,” says Robin Phillips, head of the maxon SpaceLab. “We now have very broad expertise in space applications and have established quality assurance processes that meet the expectations of the industry. Customers from other industries such as the medical sector, where requirements are often similar, can also benefit from this know-how.” Space missions place the highest demands on drive systems. This includes vibrations during the rocket launch, vacuum during the journey, impacts on landing, and the harsh conditions on the surface of Mars, where temperatures fluctuate between -125 and +20 degrees Celsius and dust penetrates everywhere
Maxon DC motors control the Mars helicopter.
The Perseverance rover is expected to land on Mars on February 18, 2021 – but it won’t be alone. A drone helicopter called Ingenuity will be attached to the underside of the rover. It weighs 1.8 kilograms, is solar powered and will perform several short flights, as well as take aerial images. The main goal of this experiment is to test the concept for further drones of this kind. maxon has six brushed DCX motors with a diameter of 10 millimeters controlling the tilt of the rotor blades and the direction of flight. The drives are very light, dynamic and highly energy-efficient. These properties are crucial, because every gram counts on the Mars helicopter. Flying on Mars is not easy. The atmosphere is extremely thin, roughly comparable to the conditions on Earth at an altitude of 30 kilometers. The drone helicopter has flown in a simulated test environment in the JPL laboratory. Whether it will lift off on Mars remains to be seen. First, other obstacles, such as the rocket launch, must be successful. “We hope that everything goes well and that we’ll soon see our drives in action on Mars,” says maxon CEO Eugen Elmiger. “We’re all keeping our fingers crossed.”
For additional information, please contact us at info.us@maxongroup.com or 508-677-0520.
About Maxon
maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com/maxon/view/content/index
Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
See this and other Motion Control Components from Maxon featured on:
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://Catalogs-MotionControl.com
Request 2020/2021 Maxon Catalog
Direct Drive Linear Motor Has Integrated Encoder and Temperature Sensor for Increased Throughput!
Motion Control – Linear Actuator Gives Higher Throughput!
The SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N). This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft. Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long. Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy. Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.
Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration. Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller
About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.
Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.
They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.
For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com
See this and other Motion Control Components from Moticont featured on:
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://Catalogs-MotionControl.com
 |
All of Moticont Components |
Moticont Videos |
Motion Control – 35mm diameter CBL35C Programmable Electric Moving Coil Servo Actuator Available from Electromate!
MotionControl-Frameless Brushless Servo Motor
With outer diameters of only 43mm to 90 mm, these frameless brushless servo motors are extremely compact.
Vaughan, Ontario, Canada — Motion Control Components — Introducing the 35mm diameter CBL35C electric cylinder with built-in controller from SMAC Corporation. With its built-in controller, the CBL35C controls force, position and velocity and features simple installation.
Ideal for applications with limited space but requiring accurate control, the CBL35C provides significantly longer life, programmability, high speed, accuracy, and energy efficiency while remaining price-competitive.
The new CBL35C series also enables the direct replacement of existing pneumatic cylinders and retrofits without any machine modifications required.
It‘s Graphical User Interface allows for easy straightforward setup of parameters and permits the user to change product profiles on the fly thereby improving factory uptime.
Features:
- Built-in controller
- Programmable position, velocity and force
- Long life expectancy over 100 million cycles
- Airless and quiet operation
- Graphical User Interface is available for simple set-up
- Space saving
Specifications:
- Dimensions [mm]: Ø35 x 135 – 217(depending on stroke)
- Stroke [mm]: 10, 25 (+1/-0)
- Acceleration[G]: up to 50 (zero payload)
- Peak Force [N]: up to 61
- Encoder Resolution [µm]: 5 (standard) 1 & 0.1 (Options)
- SMAC’s Patented: ‘Soft-Land’ Technology
CLICK HERE Additional information on SMAC’s CBL35C Programmable Electric Moving Coil Servo Actuator
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://Catalogs-MotionControl.com
http://MotionControlMarketing.com
Motion Control – Protection Against Contamination: Breathing Clean Air!
Motion Control – Protection Suit Motor!
Maxon DC motors are used in the blower components of high-quality protection suits.
Maxon was selected for the compact and lightweight DC motor design, ironless winding, strong magnet and producing very little vibration and noise output. Most importantly, a brushless DC motor was mandatory as a brushed motor may cause sparks that would ignite within the suit. When designing the suit, special attention was given to the placement of the blower unit sewn inside the suit, to avoid the need for heavy straps or air supply hoses. A Li-Ion battery provides more than four hours of operation of air supply with a flow up to 600 liters per minute.Taunton, MA -Motion Control – Protection suits containing an air blower element that fills the entire suit with clean air, have been used by health professionals when faced with contaminated environments. The COVID-19 pandemic is an unprecedented situation where these type of suits have been utilized. Maxon DC brushless motors are found inside these specialized suits. The DC motor is efficient, high-speed and robust.
For more information please contact maxon motor Australia tel. +61 2 9457 7477.
About Maxon
maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com
Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
See this and other Motion Control Components from Maxon featured on:
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://Catalogs-MotionControl.com
Request 2020/2021 Maxon Catalog
Motion Control- A Wide Variety of High-performance Drives from Maxon Motor!
Motion Control – High Performance Drives
maxon, high precision drive specialist, launches high-torque product innovations this Spring. These include higher performance flat motors, drives with higher torque output, and new additions to the GPX gearbox family.
Another addition to the EC-i family includes the, EC-i 40 High Torque 130 watt brushless motor. This drive was originally developed for power tool applications. To meet the high demand for higher-torque drives, maxon is mass producing the EC-i motor with an additional 34.8 mm in length. The versions with a fan offer up to 100 percent more power.Taunton, MA — Motion Control Components -The new, maxon EC-i 52 Power up brushless motor meets customer demands for industrial applications with higher torque. The new version of the EC-i 52 now achieves a torque of up to 1 Nm. This increase in performance is due to improved cooling, the ventilated version of the EC-i 52 Power up reaches 420 watts of nominal power.
If required, the EC-i drives may be combined with encoders, gearheads, and a maxon controller in our easy to use online shop: shop.maxongroup.com
EC 45 flat Power up – higher-power flat brushless motor
Using new processes, maxon has developed a rotor for flat motors whose housing is produced by cold forming. The result is the more powerful and less expensive EC 45 flat Power up motor, it is available in two standard versions, as well as in two new versions with either an open rotor or a fan.
ECX Torque 22: Dynamic brushless motors
Brand new additions to the market are the brushless maxon ECX TORQUE motors, which have a diameter of 22 mm and are available in three different lengths. With their iron core and multi-pole rotor design, these motors achieve a very high torque density at moderate speeds, while their low time constant makes them extremely dynamic. The ECX TORQUE motors are available as configurable units ready for shipment in 11 working days.
Ultra Performance gearhead
A new addition to the GPX gearhead family. In addition to the existing diameters of 22 mm and 32 mm, maxon is launching the larger GPX 42 UP gearhead version. The GPX UP “Ultra Performance” gearheads are extremely efficient.
About Maxon
maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com
Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
See this and other Motion Control Components from Maxon featured on:
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://Catalogs-MotionControl.com
Request 2020/2021 Maxon Catalog
Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!
Motion Control – ATTENTION – Ventilator Manufacturers!
Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond.
Electromate is a mechanical ventilator component supplier and works with a number of manufacturing partners that supply crucial components needed to build more ventilators.
These include:
- HMI’s
- Linear guides
- Linear actuators
- Screw assemblies
- Compact gearboxes
- High efficiency servo & stepper motors
- Programmable motion controllers and drives
Our team of motion design experts are located all across Canada and are available right now to help you with any electro-mechanical ventilator design. If you are working on a ventilator involving rotary, linear, or any other motion, we will provide immediate help with electro-mechanical engineering and component sourcing. Contact us today.
We are already working with ventilator and respirator companies and encourage any other businesses working on COVID-19 solutions to reach out to us.
All inquiries regarding ventilator components or any other equipment to help battle COVID-19 are given utmost priority. We can help to optimize your design quickly and provide fast turnaround proposals as requested. Additionally, we are able to meet high production demands in a very short time by utlilizing ‘Medical Fast Track Programs’ -info.us@maxongroup.com from maxon, and other vendors.
Many of the products we sell to the medical technology sector have ISO 13485 certification. This certification confirms that these products adhere to the fundamental requirements of medical technology and that all processes and procedures are documented, thereby guaranteeing traceability.
In addition to helping with the design and acquisition of critical components used in ventilators and respirators, we also want to make you aware of initiatives that you may be able to utilize. Please read below to learn more about these programs and how you can assist with the COVID-19 cause.
CODE LIFE VENTILATOR CHALLANGE
The Montreal General Hospital Foundation, in collaboration with the Research Institute of the McGill University Health Centre (RI-MUHC), is launching a global innovation challenge, backed by a prize of $200,000 CAD. They are calling for teams to design a simple, low-cost, easy-to-manufacture and easy-to-maintain ventilator which could be deployed anywhere needed to save lives.
To learn more, please visit https://www.mghfoundation.com/en/news/code-life-ventilator-challenge/
MIT EMERGENCY VENTILATOR (E-VENT) PROJECT COPY
MIT has launched an emergency research project with a team of Engineers and American clinicians to address the question:
Is it possible to safely ventilate a COVID-19 patient by automatically actuating a manual resuscitator?
Their process in approaching this question is to first identify the minimum requirements for a low-cost ventilator, based on the collective wisdom of many clinicians, design against these requirements, conduct immediate testing, report the results, iterate and facilitate discussion.
To learn more, please visit https://e-vent.mit.edu/
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/
For more information on the “Best Place to Work”CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://Catalogs-MotionControl.com
http://MotionControlMarketing.com
Motion Control – The World’s Most Compact 3000 W Integrated Servo Motor
Motion Control – Compact 3000 W Integrated Servo Motor
Vaughan, Ontario, Canada — Motion Control Components – JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control. JVL’s newest additions to their portfolio is a complete, high-capacity MAC motor® with rating of 3000W. MAC motor®s are complete servo systems including a high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC, as well as facilities for incorporating various control modules such as Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen, DeviceNet, Profibus, Profinet, Nano PLC, RS232/RS485/USB, Process Control, etc.JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors
New Compact Motor
The MAC motor sets completely new standards for the performance and size of servo controls. With a length of only 311.8mm for a 3000W motor with a torque of 9.55/28.6Nm at 3000rpm, this MAC motor matches the size of traditional servo motors without built-in controllers with flange 130x130mm. This has only been possible through the use of extremely compact motors and the development of electronics and mechanics that utilise the latest technologies and manufacturing methods. So what about vibrations and temperature? As with the other integrated servo motors in the range (50-3000W), both the motor and all electronic components have been specifically selected to withstand the rigorous demands required by industrial use.
Power Supply and Energy Savings
Powering this motor is easy since it only requires connection of the main voltage of 3x400VAC through the M23 connectors. Control voltage for the encoder and microprocessor circuitry is 24VDC: In an emergency-stop situation, where an approved relay has cut-off the main power, encoder position and other values are maintained by this control voltage. In some applications, however, this is not needed and in those cases an optional internal 24VDC supply can be used, requiring only an AC main connection. Furthermore highly effective switching technology is used to ensure low heat generation resulting in appreciable energy savings.
Other Advantages
One of the big advantages of using the integrated MAC motors is that you don’t need to install a separate servo driver or controller in a control cabinet. This gives you many subsequent advantages: Space savings in your control cabinet, saving of expensive motor and encoder cables, saving time (and money) for cabling, noise is minimized due to internal cabling and also installation errors between driver and motor are eliminated. In addition, service is much easier, since the motor and controller can be replaced as a single integrated unit. Hence downtime is minimized and production is maximized.
Information on the MAC motor from JVL can be viewed at:
https://www.electromate.com/assets/catalog-library/pdfs/jvl%20industri%20elektronik/JVL_ld0083gb.pdf
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/
For more information on the “Best Place to Work”CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://Catalogs-MotionControl.com
http://MotionControlMarketing.com
Motion Control – Maxon’s New EPOS Programmable Smart Drive/Controller – “Positioning Made Easy” are Available from Electromate!
Motion Control – Miniature Drive/Controller
Vaughan, Ontario, Canada — Motion Control Components — EPOS is a modular, digital positioning controller by maxon motor. It is suitable for controlling permanent magnet-activated motors with encoders in a range of 1 to 1050 W continuous output power. The wide range of operating modes, as well as various command interfaces, make it versatile for use in many different drive systems in the fields of automation technology and mechatronics
With the EPOS4 Compact 50/8 EtherCAT and EPOS4 Compact 50/15 EtherCAT, maxon launches the first compact devices compatible with the fast industrial Ethernet connection EtherCAT. The fully integrated, plug-and-play positioning controller in a compact design is perfectly suited for use in networks with cycle times up to 1 ms.
Powerhouse with excellent control characteristics
The functionality, operation, software, and accessories of the new controllers are derived directly from existing products in the EPOS4 range. The devices are suitable for use with both brushed DC and brushless EC motors (BLDC) and come with comprehensive feedback options such as Hall sensors, as well as incremental and SSI absolute encoders. State-of-the art concepts such as FOC, feed forward, and observer control allow optimal control in a wide variety of applications.
Comprehensive functional scope and easy operation
The existing digital and analog inputs and outputs are freely configurable and ideally matched to the numerous functions and operating modes of CiA-402 positioning controllers. Products are set up using the EPOS Studio graphical user interface (Version 3.4 and higher) for Windows PCs. In addition to the intuitive commissioning software, Windows DLL and Linux Shared Objects libraries are freely available to make integration into a wide variety of master systems as easy as possible.
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/
For more information on the “Best Place to Work”CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://Catalogs-MotionControl.com
http://MotionControlMarketing.com
Motion Control – Electromate Announces 6 New Servo Drives capable of 100A peak and 60A continuous output!
Motion Control – Servo Drives
 |
This new power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more …
Vaughan, Ontario, Canada — Motion Control — This new power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more. Safe Torque Off (STO) functionality is included as a standard feature. Available now, these new models offer high efficiency in a compact design and are targeted towards AGVs and mobile applications
Specifications:
- 100 A Peak Current Output
- 60 A Continuous Current Output
- 20 – 80 VDC Supply Voltage
- Safe Torque Off (STO) standard
- High Efficiency
- Compact Design
Information on the 6 new servo drives from Advanced Motion Controls can be found at the links below:
DPCANIA-100B080 (CANopen)
DPCANIE-100B080 (CANopen)
DPEANIU-100B080 (EtherCAT)
DPMANIU-100B080 (Click&Move® Embedded)
DPPANIU-100B080 (POWERLINK / Modbus TCP / Ethernet)
DPRANIE-100B080 (Modbus RTU / RS485)
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Google+: https://plus.google.com/104057418684128701566
Blog: https://electromate.wordpress.com/
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
|
 |
 |
 |
Motion Control – New EtherCAT Drive from Galil Motion Control!
Motion Control – EtherCAT Drive
|
|
|
|
Vaughan, Ontario, Canada — Motion Control — The EDD-3701x EtherCAT slave drive joins Galil’s EtherCAT Family. This family has grown to include two EtherCAT masters and an I/O slave with both digital and analog I/O points. The EDD-3701x is a motor amplifier that operates in an EtherCAT distributed system where there are up to 32 slave drives and one master. It has a daisy chain topology using standard CAT5 Ethernet cables. The EDD-3701x can interface with Galil masters (DMC-500×0 and DMC-52xx0) for sophisticated applications or with TwinCAT® for very simple applications.
The EDD-3701x series has the ability to control brushed, brushless, steppers, and microstepping motors (See Table 1 for more details). Unlike the competition, the EDD-3701x can both control a motor and also has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs. All I/O information from these drives are accessible by the EtherCAT master. This capability can eliminate the need for separate EtherCAT I/O devices. The configuration of the EDD-3701x is done using the Galil’s GDK software. Simply connect to a PC via EDD-3701x’s USB port, follow the GDK configuration tool process, and start moving motors. The EDD-3701x also comes with a setup guide to get the user from taking the EDD out of the box to moving motors in a manner of minutes
The EDD-3701x has a small form factor with just 3.9”x5.0”x1.5”. It can operate in either Cyclic Synchronous Position mode (CSP) or Cyclic Synchronous Torque mode (CST). It also accepts quadrature encoder feedback up to 15 MHz.
CLICK HERE For additional information on the EDD-3701x EtherCAT Slave Drive
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Google+: https://plus.google.com/104057418684128701566
Blog: https://electromate.wordpress.com/
For more information on the “Best Place to Work”CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
Motion Control – Linear Servo Controller Amplifier to Control Voice Coil Motors
Forestville, CA, — The SCA814 Linear Servo Controller was specifically designed to control single phase, non-commutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface. This card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils. It was specifically developed for control of motor applications requiring both high temporal and spatial servo precision, such as machine vision, inspection, scientific imaging, medical imaging and other business applications. This amplifier interfaces directly to many of the Equipment Solution motor/stage solutions.
Besides galvanometers the SCA814 is directly compatible with all the ESI linear voice coil stages and the optical scanners. A bipolar linear or switching regulated power supply is required by the SCA814 amplifier. Typically better performance can be achieved when using a linear power supply. Equipment Solutions has several high-current supplies for this purpose including the SPS15 ±15V DC Switching Power Supply .
Click Here for
- Specifications
- Servo Diagram
- Interface Drawings
- Downloads
Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.
For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com
|
 |
 |
 |
 |
Motion Control Components – New EtherCAT Drive from Galil Motion Control!
|
|
|
|
Vaughan, Ontario, Canada — Motion Control Components — The EDD-3701x EtherCAT slave drive joins Galil’s EtherCAT Family. This family has grown to include two EtherCAT masters and an I/O slave with both digital and analog I/O points. The EDD-3701x is a motor amplifier that operates in an EtherCAT distributed system where there are up to 32 slave drives and one master. It has a daisy chain topology using standard CAT5 Ethernet cables. The EDD-3701x can interface with Galil masters (DMC-500×0 and DMC-52xx0) for sophisticated applications or with TwinCAT® for very simple applications.
The EDD-3701x series has the ability to control brushed, brushless, steppers, and microstepping motors (See Table 1 for more details). Unlike the competition, the EDD-3701x can both control a motor and also has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs. All I/O information from these drives are accessible by the EtherCAT master. This capability can eliminate the need for separate EtherCAT I/O devices. The configuration of the EDD-3701x is done using the Galil’s GDK software. Simply connect to a PC via EDD-3701x’s USB port, follow the GDK configuration tool process, and start moving motors. The EDD-3701x also comes with a setup guide to get the user from taking the EDD out of the box to moving motors in a manner of minutes
The EDD-3701x has a small form factor with just 3.9”x5.0”x1.5”. It can operate in either Cyclic Synchronous Position mode (CSP) or Cyclic Synchronous Torque mode (CST). It also accepts quadrature encoder feedback up to 15 MHz.
CLICK HERE For additional information on the EDD-3701x EtherCAT Slave Drive
About Electromate:
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Google+: https://plus.google.com/104057418684128701566
Blog: https://electromate.wordpress.com/
For more information on the “Best Place to Work”CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
Motion Control – Maxon’s Configurable DC Drives!
Maxon motors introduces a NEW Super-fast and sterilizable Brushless Motor!
 |
Fall River, MA – Motion Control Components – maxon motor launches new high-speed motors that are configurable online. The new ECX brushless motors are quiet and feature very high efficiency. These brushless drives are ideal for use in hand-held surgical tools and industrial spindles.
The ECX SPEED series of brushless motors has been optimized for high speeds (up to 120,000 rpm). Several different performance classes are available to fit your application: Standard, High Power, sterilizable (up to 2000 cycles) or with ceramic bearings for high speeds.
With a few clicks of your mouse you can configure your drive online and place your order. With maxon motor’s configurator, it is easy to put together a customized DC motor – including gearhead, encoder and controller, to your specifications. Now, in addition to the brushed motors, you can also configure these three new high speed brushless micro motors.
ECX motors are available with diameters of 8 mm, 16 mm and 19 mm achieving speeds of up to 120,000 rpm. They run very smoothly and are highly efficient. They are available with different power stages and in standard or sterilizable versions.
All three high-speed motors (8 mm, 16 mm and 19 mm) are now available in maxon’s online shop, where customizing the drives is easy. This means that customers can fit the drives with specific mechanical and electrical components specific to their application needs. For example, with the ECX 8 mm, the GPX planetary gearheads and ENX 8 encoders are available. It is also possible to customize the shaft lengths, winding types, ball bearings and much more.
Select the mechanical and electrical interface online.
Lean, automated processes ensure that all configurable drives are ready for shipment within 11 working days.
For More Information CLICK HERE
To View Video CLICK HERE
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
|
|
 |
Motion Control – A Powerful and Cost-effective Drive from Maxon!
Motion Control Components – Maxon motors introduces the brushless EC-i 30 motor.
|
Fall River, MA — Motion Control Components – Miniature Motors – Several different versions of the high-torque, brushless EC-i motors from maxon motor are now available in small diameters. They are perfect for hand-held devices and robotic applications.
With the EC-i 30, maxon motor is introducing a new brushless DC motor. It has a diameter of 30 millimeters and is smaller than the EC-i 40 currently available. This motor stands out for its high dynamics, low cogging torque, and high torque. It is available in two lengths, each in a Standard and a High Torque version, with a maximum nominal torque of up to 110 mNm at 75 W.
Many possible combinations
Despite their impressive performance, EC-i 30 DC motors are a cost-effective alternative to existing drives. The compact design is especially suitable for hand-held devices and for robotic applications
All versions of the new EC-i 30 motors may be combined with encoders, gearheads, and servo or positioning controllers from maxon motor – quickly and easily in the maxon online shop: shop.maxonmotorusa.com
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.
|
|
|
Motion Control – Panel Mount Servo Drive Provides Centralized Control & Offers High Bandwidth & Quick Response Times!
 |
Greenville, DE —-Motion Control Components – The AB25A100 PWM servo drive from Advanced Motion Controls is designed to drive brushless and brushed DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against overvoltage, under-voltage, over-current, over-heating and short-circuits across motor, ground and power leads. Furthermore, the drive can interface with digital controllers or be used stand-alone, and requires only a single unregulated DC power supply. Loop gain, current limit, input gain and offset can be adjusted using 14-turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes. This drive can use quadrature encoder inputs for velocity control. Features include:
- Built-in hardware protection – Over Current, Over Voltage, Under Voltage, Over Temperature, Short Circuit
- DIP Switches and Potentiometers for loop tuning, current limit adjustments and drive configuration
- Standard models support both brushless and brushed motor types
- Velocity feedback via incremental encoder, Hall Sensors, or tachometer
- Optical isolation between high and low power signals standard on certain models
- Current, Velocity, and Fault Monitor analog output signals
- Status LEDs for power and drive status
- Four quadrant regenerative operation
CLICK HERE for more information on the AB25A100 Servo Drive from Advanced Motion Controls.
These and other Motion Control Products are available throughwww.Servo2Go.com
For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com
|
 |
 |
 |
Motion Control – Endless Torque… …The EC-i 52 DC Motor by Maxon Motor!
|
Fall River, MA — Motion Control – With their optimized magnetic circuit and special rotor, the new brushless DC motors from maxon deliver an impressive amount of torque. The EC-i 52 drives are considered to be high quality at an attractive price.
There is an increasing demand for DC motors that are powerful and compact, especially in applications such as robotics and industrial automation. Swiss drive specialist, maxon motor, has developed a range of brushless DC motors that meet these special requirements: the EC-i High Torque. The latest addition to these drives is the largest and most powerful model, with a diameter of 52 millimeters and a continuous torque of up to 440 mNm.
Matching gearhead and controller also available
The housing and flange of the EC-i 52 High Torque are made of steel, which makes the motor extremely robust. It also does not heat up so quickly. It is manufactured in maxon’s plant in South Korea, which guarantees an excellent price/performance ratio. If required, the EC-i 52 brushless DC motor can be combined with an encoder, gearhead and controller from maxon. Check out our easy to use online shop at shop.maxonmotor.com
Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.shop.maxonmotor.com.
|
|
|
