Category Archives: Linear Actuators – High Force

Motion Control Application – Open Screw Drive System Moves Heavy Sound Stage Sets Smoothly, Quickly, and Quietley!

Motion Control Application – High Speed Drive System

motion control - application


motion control - lm76

 

 

E. Longmeadow, MA –Motion Control Application-

Problem: Move heavy sets on a sound stage smoothly, quickly, and most importantly quietly! Ball screws specified in the original design proved unacceptable due to the limited length of travel, screw deflection which resulted in a lack of smoothness, and high noise levels. A rack and pinion was also considered but the noise level was also too high and there was no room for a gearbox. Linear motors are quiet however the cost was prohibitive, and a belt system could not handle the heavy loads.

Solution: The new Streamliner Open Screw Drive System from Winner was selected by the production company to move the heavy sets on the sound stage.

Motion Control – Low Profile XYZ Force Positioning System from H2W Technologies!

Motion Control – Low Profile XYZ Positioning Stage

motion control - xyz stage
motion control- h2w
Santa Clarita, CA —– Motion Control – This compact closed loop system was designed to satisfy the customers dual feedback requirements. This allows for simultaneous position and force monitoring which can adjust accordingly in three axis of motion (XYZ). It was designed to operate in an inverted orientation. This low profile XYZ-Force positioning stage design is comprised of a SRS-002-003/002-003-01-XY single rail positioning stage (horizontal XY-axis) with a mounted VMS06-008-LB-01 voice coil positioning stage (vertical Z-axis).

Motion Control – Low Profile XY Brushless Linear Motor Positioning Stage from H2W Technologies

Motion Control – Low Profile XY Linear Motor Positioning Stage

motion control - custom stages


motion control - h2wSanta Clarita, CA —– Motion Control – The
SRS-004-006/004-003-01-XY is a low profile XY single rail positioning stage that uses brushless linear motors to generate a continuous/peak force of 6.2 lbs [27.8 N]/18.7 lbs [83.3 N] (bottom axis), 3.1 lbs [13.8 N]/9.4 lbs [41.8 N] (top axis), with a total stroke length of 4.3 in [109 mm] (bottom axis), 4.3 in [109 mm] (top axis). The top axis is able to directly mount to the moving bottom axis motor. This helps reduce the overall height and moving mass of the system.

Motion Control – LDL25 Series Linear Actuator, available from Electromate, is a cost-competitive alternative to pneumatics!

Motion Control – Linear Actuator
motion control - electromate logo

Cost-competitive Alternative to Pneumatics, Starting at $300 US/ea

motion control - linear actuator

Vaughan, Ontario, Canada — Motion Control Components — The LDL has been designed as a cost-competitive alternative to pneumatics. A common trend in industrial automation is that users are looking for electric alternatives to their pneumatic components for a number of reasons: control, cycle life, operating cost and environment, etc. The LDL series actuator features several innovative cost reduction elements that result in a list price starting at $300 US.

Motion Control – Voice Coil Motor with Internal Shaft and Bearing Features 63.9 lbs of Continuous Force!

Motion Control – Voice Coil Motor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont has added a new high force voice coil motor to its GVCM family of voice coil motors with an internal shaft and bearing. The new GVCM-095-089-03 Linear Voice Coil Motor (also known as linear DC motor) features a continuous force of 63.9 lbs (284.1 N) and 202.0 lbs (898.4 N) of peak force at a 10% duty cycle. Guided by a long-life plain bearing that can allow side loads up to 3 lb (13.5 N), the precision ground 0.236 inch (6.0 mm) diameter shaft with an internal thread has a stroke length of 0.5 in. (12.7 mm). The quiet, efficient, smooth, cog-free motion of this low inertia brushless GVCM-095-089-03 Linear Voice Coil Motor is ideal for: Clamping, work holding, sorting equipment, assembly, medical devices, antenna positioning, testing, slide actuators, shutters, doors, valve actuation, wafer handling, and optical focusing.

This new voice coil actuator features: High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, and a high force to size in either direction, in a housing measuring just 3.75 in. (95.3 mm) dia. x 3.5 in. (88.9 mm) long. The housing and coil ends of the motor have threaded mounting holes in the housing and coil ends for easy integration into new and existing applications.

Is there a need for a smaller or larger diameter motor, one with longer stroke, or more force? There are currently 7 series of Moticont’s expanding line of GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application, please visit: http://www.moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


For other Motion Control Components, Applications, and Technology from Moticont go to: http://MotionControlBuyersGuide.com
 

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control actuators are compact mechatronic cylinders that feature a motor, encoder, drive & actuator in one integral package!

Servo2Go-Logo

Greenville, DE —-Motion Control Components – Servo2Go.com has just added remarkable new additions to its broad range of cost-effective 24V electric linear actuators from Dyadic Systems. The SCN6 series actuators are compact yet powerful integrated mechatronic cylinders that feature a motor, encoder, drive and actuator in one integral package.

Dyadic Systems has developed the linear actuator drive mechanism such that the screw and nut are optimized for high accuracy, long life and low cost while delivering high speed and peak thrust. This blend of low-cost and high performance could only have been realized by the advanced technology of Dyadic Systems. These new product concepts give engineers a wider range of options to eliminate over-design.

SCN6 series Mechatronics Cylinders are available in strokelengths to 300mm and 500N (51kgf) maximum thrust and are constructed using an extruded aluminum body with 303 stainless for the shaft and rod tip. Actuators can easily be operated via 24VDC signals from PLCs or relays, and can be connected in networks of up to 16 axes. Servo Actuators from Dyadic feature:

  • Teach pendant, PLC pendant or PC Tool Kit programmable
  • +-0.1mm repeatability
  • 0.3mm backlash
  • 50-300mm stroke versions
  • Up to 200mm/sec max. speed
  • 16 discrete position program capacity
  • IP40 sealed, with optional IP54 sealing
  • Electric actuators – programmable in 15 minutes!
  • The SCN6 starts from only $465 US/ea!
  • Moves can be relative, absolute, force controlled, and more
  • All actuators run on 24VDC – easy to connect to your existing power supply!
  • Air cylinder replacement mode and move sequencing available in the cylinder!

For More for more information on the SCN6 Actuator from Dyadic Systems CLICK HERE!

Be Sure to visit the NEW Servo2Go Website! http://www.Servo2Go.com

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Tolomatic Actuator Rated up to 50,000 pounds of force!

Motion Control – High Force Actuator to 50,000 Lbs!

motion control - actuators

 


motion control - ElectromateVaughan, Ontario, Canada — Motion Control — Tolomatic’s expanded extreme-force electric actuator family now includes the RSX128 actuator, rated up to 50,000 pounds of force (222.4 kN). Designed for replacing hydraulic cylinders and designed for 100 percent duty cycle, the RSX actuator features Tolomatic’s precision-ground planetary roller screws for operating life in challenging environments. Applications include assembly, metal fabrication (pressing, punching, clamping), automotive manufacturing, timber processing, motion simulators and more.

The RSX128 actuator represents a 60-percent increase in the bi-directional maximum force provided by Tolomatic’s extreme-force RSX electric actuator family. Additional frame sizes include the RSX080 which provides 18,000 lbf/80kN and the RSX096P press-model which is optimized to provide extend force up to (40,000 lbf/178 kN).

For all models, IP65 is standard for protection against dust and water spray. IP67 is optional for improved resistance of water ingress. A modified food-grade version, designed for volumetric filling and other high-force food-and-beverage applications, is available as a custom design with food-grade white epoxy coating and stainless-steel components to meet the requirements of washdown applications.

The entire RSX actuator family’s construction includes tie-rods and Type III hard-coat anodized aluminum housings. A standard internal anti-rotate feature prevents the rod from rotating without external guidance.

CLICK HERE for information on the RSX128 actuator from Tolomatic can be viewed at:

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate logo