Category Archives: Linear Bearings

Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Motion Control – ETX Pillow Block/Bearings for Radioactive Environments

motion control pillow blocks/bearings

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures As there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free. Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water.

motion control - lm76

Designed with a slight interference fit between bearing ID and shaft, contaminates are scraped from the shaft’s surface. The low frictional characteristics of ETX have little impact on drive force. They are now available in Inch and Metric sizes.

Motion Control – The Engineering Edge – Linear Motion Application – Moving Articles of Antiquity!

Motion Control – Linear Bearings Application
motion control - engineering edge
Linear Motion Application – How Do You Move Articles of Antiquity?

Very Carefully With A High Load Rail System from LM76!

motion control - linear guides

E. Longmeadow, MA – — The Boston Museum of Fine Arts (MFA) has to move articles of antiquity from one location to another. In this instance, they are moving a 5000 year old relief (hieroglyphics) weighing 8000 pounds to a new location in the Museum. Here is a frontal photo of the Relief from The Tomb of Senenuka.

Part of wall from tomb of Senenuka; nine stones fitting together and including two niches; lower left piece smooth limestone; upper far left preliminary black ink sketch; right of this sketch is a complete relief showing two seated figures; central piece has large scene of seated male on the left and other smaller male figure to the right; upper far right male figure relief outline; left of this again a scene of two seated figures at a table.

motion control - lm76

Senenuka Time of Khufu or Khafre (Maybe Dyn 5?) Overseer of the Pyramid-town of Khufu, Director of King’s wad-priests, Boundary official of a settlement, etc.

The MFA contracted CBI Consulting of Boston to design the frame and fixturing. Craig Barnes, an award winning architectural engineer called Mike Quinn of LM76 to review the linear motion application. Over the course of several weeks, LM76 and design partner Todd Kanipe designed a telescoping, high load roller/linear motion rail system that won approval. According to CBI’s Keith Bouchard, the linear rail system moves very smoothly and so far meets the expectations of this program.”

Linear Motion Application – According to MFA Antiquity Specialist Jean Louis Lachevere, “All of these moves present very real dangers to the artifact being transported. In this case, we have a 8000 pound relief which already has its problems due to age and the fact that it is limestone ( limestone is very vulnerable to the atmosphere ).” Seen from the front, the relief is straight. From the back, much of the top back is gone. Thus, the back of the relief has to be plastered so the back is flat. Pins are inserted to further reinforce the relief and then it is tipped on its back. It is then moved to its new atmospherically controlled display case. LM76’s design is used in the transfer from the dolly to the mounting rails and restraints in the display case. This 36” motion is fraught with things that can go wrong. One of the considerations is the possibility of an earthquake…any problem conceivable is taken into account.

motion control - linear bearingsCastors and sliders at end of armature. The sliders are mounted to the castors and work like telescoping drawer slides.

 

motion control - linear bearing applicationCastors and sliders as seen from below. The chalk X is used to mark the block where added weld is required. Each block is to be welded both sides. Each slider is to be addressed.

 

motion control - applicationPhoto demonstrates that the wheels can rotate independently.

 

 

motion control - heavy loadView of the slider assembly at the center of the welded fixture.

 

 

 

For Additional Information on LM76’s High Load Rail Systems go to: http://www.lm76.com

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman Teflon® Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

motion control - linear bearings

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

motion control - engineering edge

See this and other Motion Control Components from LM76 are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net
Industrial Safety – Request the “Gotcha-Stick”
LM76 Blog
LM76 Catalogs

motion control - linear bearings

 

Motion Control – Use FDA Compliant Off-the-Shelf Linear Motion Components!

Motion Control – FDA Compliant Components

To: OEMs “Tooling Up” for Urgently Needed Medical Products! Use FDA Compliant Off-the-Shelf Linear Motion Components!

motion control FDA compliant components

 

LM76

E. Longmeadow, MA — Motion Control Components – Linear Motion – In dealing with the COVID-19 pandemic many companies have volunteered or been requested to produce urgently needed medical products such as: Masks, gowns, and ventilators. “Tooling Up” quickly to produce medical grade products for some companies can bring challenges. In addition to needing FDA compliant materials that will be used in the actual masks, gowns, and ventilators, the tooling used to manufacture these products may also need to meet FDA compliance standards. Depending on the product being manufactured, the tooling may need to be: Washed down using caustic chemicals, cleaned with high pressure steam, or sterilized with high Intensity Ultra Violet light or radiation.

Ordering custom FDA compliant linear motion slides and XYZ stages can result in long delays. As an alternative, many companies have linear motion slides in stock for immediate delivery, however, they may not be FDA compliant. In many cases it is the bearings that are not in compliance. LM76 manufactures several types of FDA compliant linear bearings and pillow blocks that are drop-in-replacements for existing bearings. FDA compliant bearings and pillow blocks from LM76 will not trap contaminating debris and can be thoroughly sanitized following Sanitation StandardOperating Procedures (SSOPs). SSOPs are detailed schedules and procedures specifying what to clean, how to clean, how often to clean, and the record keeping used for monitoring.

A helpful component selection guide from LM76, “Linear Bearings, 6 Simple Steps – FDA Compliance, Wash Down Compliance,” details the linear motion components available from LM76 that are FDA/UDSA/3A-Dairy compliant. Included are: Foodstream electroless nickel plated pillow blocks, PTFE lined stainless steel bearings, ceramic coated linear bearings, self-aligning corrosion resistant linear ball bearings, and Thomson® Super SmartTM corrosion resistant, self-aligning, high load linear ball bearings, and solid ETX pillow block/bearings. Shafting to compliment the type of bearing selected includes: Class L Stainless 303/304/316, 440C case hardened stainless, Rc 60 case hardened steel with an Armoloy coating and also Rc78 Class L for enhanced hardness and wear resistance. End blocks and shaft supports that have a ceramic or electroless nickel coating are also available, as well as new ETX Scraper Seals that prevents intrusion of contaminates adding another line of defense.

LM76 also designs and custom builds linear slides from Stainless Steel and other FDA wash down compliant materials.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com


See this and other Motion Control Components from LM76 featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://LM76Blogger.com


LM76
Visit our Website
Order Our Catalog

 

 

Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Motion Control – ETX Pillow Block/Bearings for Radioactive Environments
motion control pillow blocks/bearings

LM76

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures As there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free. Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water. Designed with a slight interference fit between bearing ID and shaft, contaminates are scraped from the shaft’s surface. The low frictional characteristics of ETX have little impact on drive force. They are now available in Inch and Metric sizes.

ETX bearing-blocks are also FDA/USDA/3-A Dairy compliant and are also are ideal for: Pharmaceutical, medical, food, and dairy processing applications.

EXT features a high continuous service temperatures up to 210°F (100°C) and offers good chemical and abrasion resistance, low moisture absorption, and resistance to staining. These ETX linear bearing-blocks with the slight interference fit keeps the bearing free from debris and bacterial contamination, are not affected by biological fluids, mild acids, can be washed down with cleaning agents, and steam cleaned.

Don’t need solid EXT bearing-blocks consider the FDA/USDA/3-A Dairy compliant electroless nickel coated or stainless steel pillow blocks with PTFE linear bearings and Snap-in EXT Scraper Seals which are available for closed linear bearings, and closed pillow and flange blocks.

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

For other Motion Control Components, Applications, and Technology from LM76 go to: http://AllMotionBlogger.com
 

LM76
Visit our Website
Order Our Catalog

Motion Control – Precision “Zero Clearance,” Smooth Sliding Partial Extension Rails Available from LM76!

LM76

E. Longmeadow, MA Motion — Control Components – Linear Motion – As the exclusive distributor of SAIBO Linear Motion Systems in the US, LM76 is offering the SAIBO TPE28 and TPE43 series of Partial Extension Rails. These compact, precision, smooth sliding rails are assembled with a zero clearance. The TPE28 and TPE43 Partial Extension Rail series are created using a “C” shaped external rail and an internal slider. Two rows of steel ball bearings (one on the top and bottom of the slider) travel in ball cages on hardened “V” shaped ways with four points of contact. These Partial Extension Rails are Ideally suited for applications requiring smooth motion such as: Material handling, rail systems in trains, aircraft, ships, trucks, and autonomous vehicles, wafer handling, delicate parts transfer, assembly, testing, laser machining and drilling.

The TPE28 series of Partial Extension Rails consists of 14 rails with stroke lengths from 72 mm (2.834 in) to 601 mm (23.661 in.) and supporting loads from 1224 N (275 lbs) to 15,166 N (3409 lbs) when two rails are mounted in parallel and the load is uniformly distributed between the rails. The TPE43 series of Partial Extension Rails consists of 23 rails with stroke lengths from 123 mm (4.842 in) to 1013 mm (39.881 in.) and supporting loads from 3192 N (717 lbs) to 48460 N (10,894 lbs) when two rails are mounted in parallel and the load is uniformly distributed between the rails. Stroke lengths (extension) are typically 51% of the length of the assembly.

These industry standard Partial Extension Rails are ideal for use in new and existing applications. Both the TPE28 and TPE43 Partial Extension Rails have a maximum working speed of 0.8 m/sec. (xxx in/sec )and have an operating temperature range of -20OC (-20OF) to 120OC (-20OF). For complete information on the assembly, loads, and stroke lengths for each series and additional details consult the factory.

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

And say, “I saw it on MotionShop.com, “The Motion Control Home Page.”


For other Motion Control Components, Applications, and Technology from LM76 go to: http://AllMotionBlogger.com
 

LM76
Visit our Website
Order Our Catalog

Linear Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Linear Motion Control

 

LM76

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures As there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free. Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water. Designed with a slight interference fit between bearing ID and shaft, contaminates are scraped from the shaft’s surface. The low frictional characteristics of ETX have little impact on drive force. They are now available in Inch and Metric sizes.

ETX bearing-blocks are also FDA/USDA/3-A Dairy compliant and are also are ideal for: Pharmaceutical, medical, food, and dairy processing applications.

EXT features a high continuous service temperatures up to 210°F (100°C) and offers good chemical and abrasion resistance, low moisture absorption, and resistance to staining. These ETX linear bearing-blocks with the slight interference fit keeps the bearing free from debris and bacterial contamination, are not affected by biological fluids, mild acids, can be washed down with cleaning agents, and steam cleaned.

Don’t need solid EXT bearing-blocks consider the FDA/USDA/3-A Dairy compliant electroless nickel coated or stainless steel pillow blocks with PTFE linear bearings and Snap-in EXT Scraper Seals which are available for closed linear bearings, and closed pillow and flange blocks.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

For other Motion Control Components, Applications, and Technology from LM76 go to: http://MotionControlWeb.com

LM76
Visit our Website
Order Our Catalog

The Engineering Edge – Jet Rail Linear Roller Blocks – Loading Instructions

Go to http://lm76blogger.com/linear_motion/1407 for an Application of Jet Rail Linear Roll Blocks

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

For other Motion Control Components, Applications, and Technology from LM76 go to: http://MotionControlWeb.com

LM76
Visit our Website
Order Our Catalog

Motion Control – The Engineering Edge – Application – ETX Pillow Blocks!

motion control components

motion control - the engineering edge application

Motion Control Application – This was a troublesome application. This system is completely submerged in radioactive water at a nuclear power plant. So no Teflon, no seals, no lubrication – nothing that will degrade in a radioactive environment. The majority of components are stainless steel – except for our ceramic coated/supported shafting and our special, designed for this particular application/never made before, ETX self-lubricating linear blocks. As you see, there is a circular saw which cuts metal-mesh filters which need to be replaced every few months. A big solution for a pressing application. For more information, call 1-800-513-3163 or email: mquinn@LM76.com 

the engineering edge

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

Water Dog Sliders from LM76 are FDA/USDA/3-A Dairy Compliant!

Engineering Edge - FDA/USDA/3-A Dairy Compliant Linear Slides
engineering edge - Linear slides

 

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

Motion Control – FDA/USDA/3-A Dairy Compliant Linear Motion Components

Motion Control FDA / USDA / 3A-Dairy Compliant Components –
Motion Control - Linear Motion - Fluidline Linear Bearings

 

Motion Control – Linear Motion – LM76 FluidLine Motion Control Linear/Rotary bearings are FDA/USDA & 3A Dairy Complaint. They are also caustic wash down inert. FluidLine bearings one piece construction has benefits over traditional Teflon Composite lined aluminum bearings: if you have a wear situation, Teflon Composite Bearings have a .035″ Teflon Composite Liner. Once you wear through the liner, you are into the aluminum shell. FluidLine bearings will simply wear more and more until they are too sloppy and can replaced at your convenience. They are also less expensive in volume because there are fewer manufacturing operations. We can easily design and produce special ID’s, OD’s, Lengths and features such as flanges.

For Additional Information:

Fluidline Linear Bearings (Description) CLICK HERE

Fluidline Linear Bearings (Catalog page) CLICK HERE

Electroless Nickel Pillow Blocks and Flange Blocks CLICK HERE

FDA/USDA/3-A Dairy Compliance Brochure CLICK HERE

Call Mike Quinn 1-800-513-3163 to find out if FluidLine is a good match for your application.

Or email: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – Lintech Profile Rail Linear Recirculating Bearings Are Available from Electromate!

Motion Control - Lintech MR Series, ARC Series, and HRC Series Profile Rails available from Electomate

Motion Control - Electromate-Logo

 

 

 

 

 

Motion Control Components _ Vaughan, Ontario, Canada – Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the Motion Control MR, ARC & HRC series include:

  • Size 15, 20, 25, 30, 35, 45
  • N, H and P accuracy grade
  • V0, V1 and V2 block pre-load
  • Short/Normal/Long block lengths
  • Normal and Flange width styles

Lintech’s family of cost-effective short-delivery Profile Rail Linear Bearings includes:

MR Series –Miniature Profile Rail Linear Guides

motion control - Profile Rails available from Electomate

featuring:

  • 2 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • SS bearing, rail, and balls
  • Self-lube reservoir standard

ARC Series –Standard Profile Rail Linear Guides

Lintech MR Series Profile Rails available from Electomate

featuring:

  • Application Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

HRC Series– Heavy Profile Rail Linear Guides

Lintech MR Series Profile Rails available from Electomate

 

featuring:

  • Heavy Load Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Linear Motion Control Technology – “New Design Pillow and Flange Blocks!

Motion Control – Stainless Steel And Self Aligning Linear Ball Bearings Are Easily Lubricated Right Inside of LM76’s “New Design” Pillow And Flange Blocks!

Linear Motion Control - LM76 New Design Pillow and Flange Blocks!

 

LM76

E. Longmeadow, MA Motion Control Components – Linear Motion – Lubricating Stainless Steel and Self-Aligning Linear Ball Bearings has never been easier! “New Design” pillow blocks and flange blocks from LM76, features a lubrication fitting, and an alignment set screw in the pillow blocks and flange blocks, and the Stainless Steel and self aligning linear bearings are modified by having an alignment flat ground on the bearings’ outer shell and drilling a hole through the outer shell. Lubricants can then be pumped directly inside of linear ball bearing races without having to remove the bearing from the shaft. The Pillow and Flange Blocks also have been designed to accommodate an encapsulated ETX Scraper Seals that prevents contaminants from getting inside the bearing and retains the lubricant in the bearing.

These “New Design” pillow blocks are available in closed single and double bearing models for inch sized shafts from 0.5 inches up to 2.00 inches and the flange blocks are available in single and double bearing models for inch sized shafts from 0.5 inches to 1.25 inches.

They “New Design” pillow blocks are available in untreated aluminum or with a FDA/USDA/3A-Dairy compliant corrosion resistant Electroless Nickel coating. When used with a FDA/USDA/3A-Dairy compliant lubricant the pillow block and flange block bearing combinations are ideal for: Food processing, handling, and packing, bottling, pharmaceutical production and packaging, medical testing or patient handling, and other applications where there are corrosive or contaminating fluids (e.g. fruit juices, biologics, etc.), or when cleaning with steam and/or caustic chemicals is required. LM76 also produces PTFE, filled PTFE, and ceramic bearing options as well as precision shafting.

Shafting options include: Solid and hollow Class L RC60, 300 series stainless steel in lengths to 12 feet. FDA/USDA/3A-Dairy compliant, shafting features: Excellent corrosion and chemical resistance, custom machining to print, pre-drilling and assembly.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – Complete Guided Motion Solutions from A to X-Y-Z … … Available from Electromate!

motion control - Linear Guides - Electromate offers Guided Motion Solutions

 

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — Bishop-Wisecarver invented and patented DualVee Motion Technology® more than 40 years ago to provide a solution for harsh environment applications where existing technologies were ineffective. DualVee® also proved excellent for long length, smooth motion and low noise requirements.

Linear Guides - Electromate offers Linear Motion Solutions

Today, Bishop-Wisecarver remains the recognized expert and the most trusted name in guide wheel technology, with the widest range of guide wheel based linear motion products in the world

Benefits of Guide Wheel Technology include:

  • Harsh Environments
  • Long Lengths
  • Low Noise
  • Smooth, Low Friction Motion
  • Speeds up to 5.5 meters/sec
  • Acceleration up to 5 g’s
  • High Temperature, Low Temperature
  • Clean Room Options
  • Ease of Assembly, Low Cost Installation
  • Low Maintenance

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

CLICK HERE to view the Bishop-Wisecarver Catalog

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Pegasus Series 1 Linear Bearings – For When A Linear Bearing Simply Cannot Fail!

Linear Motion Control - LM76 Pegasus Linear Ball Bearing!

LM76

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 has developed the most corrosion resistant linear bearing available. In space, deep under the sea, or in the harshest environments when there can be no “Plan B,” Pegasus Series 1 Linear Ball Bearings can be counted on to perform. In some applications linear bearings will not move for days, weeks, months or even years, however, when called on to perform they must work as if they just came out of the box. LM76’s Pegasus Series 1 Linear Bearings feature Silicon Nitride (SiNi) Ceramic Balls in a shell with retainer and end caps all made from 440 Stainless Steel and then ArmorloyTM coated.

Silicon Nitride was selected for the balls because it is: 40% lighter than steel, inert to chemicals (vapors, sea water, caustic washing and sterilizing solutions), capable of higher speeds and higher loads: (RC78 hardness), FDA compliant (used in surgical instruments), and does not corrode or support electrolysis.

The shell, bearing retainer and end caps are made from 440 Stainless Steel and coated with Armoloy TDCTM(Thin Dense Chrome). Armoloy is a hard (78Rc), coating with a micro-nodular surface texture. The coating’s nodular finish reduces the amount of surface area in contact with the SiNi balls reducing friction and extending life.

Pegasus Linear Bearings are available 2 series (closed and open), and in 4 sizes (1.000″, 1.250″, 1.500″ and 2.000″). Dynamic load rating for these bearings are: 1.000″ 220 lbs, 1.250″ 352 lbs, 1.500″ 490 lbs, and 2.000″ 858 lbs. Bearings are designed for zero clearance on Class L linear shafting. For maximum performance we recommend LM76 Case Hardened 440 Stainless Steel shafting with ArmorloyTM coating.

 

Go to – http://lm76.com/Pegasus%20SE1.compressed.pdf for additional information

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – Linear Motion Fluidline Bearings Available from LM76 are FDA/USDA/3A Compliant!

Motion Control - Linear components from LM76

Motion Control LM76-Fluidline-FDA-USDA-Linear-Bearings

Linear Bearings

E. Longmeadow, MA — Motion Control – Linear Motion Bearings – FDA/USDA/3A compliant bearings, Seals, Shafting, and Pillow Blocks are available from LM76.

LM76 Fluidline BearingsTM are long wearing thermoplastic polyester self lubricating, low coefficient of friction, light weight linear bearings. Available off-the-shelf in standard closed inch sizes (closed metric sizes are available on request) these bearings drop-in replacements for standard linear bearings. They are highly resistant to wash-down chemicals and high energy radiation such as gamma and x-rays

These linear motion control bearings exhibit very good dimensional stability, and creep resistance, excellent stain resistance, and physiologically inert and therefore suitable for food contact. They work well on stainless steel shafting and on the less expensive ceramic coated aluminum shafting also available from LM76.

Also available from LM76 are other FDA/USDA/3A compliant low cost linear bearings, in open and closed styles, compliant scrapers, stainless steel pillow blocks, and stainless steel and ceramic coated shafting.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – FDA/USDA/3A-Dairy Compliant ETX Scraper Seals for Linear Bearings Used In Food Processing Applications!

Linear Motion Control Components - LM76 ETX-Seals!

LM76

E. Longmeadow, MA — Motion Control — Linear Motion – LM76 has introduced FDA/USDA/3-A Dairy compliant, snap-in ETX Scraper Seals for linear bearings. Machined from Ertalyte® PET-P, ETX Scraper Seals have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures than seals from other materials. Designed with a slight interference fit between bearing ID and shaft, ETX Scraper Seals prevents contaminates and debris from migrating beneath the seal as it scrapes the shaft surface. Ertalyte® PET-P’s low frictional characteristics have little impact on drive force. These FDA/USDA/3-A Dairy compliant scraper seals are ideal for: Pharmaceutical, medical, food, and dairy processing applications.

EXT Scraper Seals feature a high continuous service temperature up to 210°F (100°C) and offer good chemical and abrasion resistance, low moisture absorption, and resistance to staining. These linear bearing scraper seals keep bearings free from debris and bacterial contamination, are not affected by biological fluids, mild acids, can be washed down with cleaning agents, and steam cleaned. Snap-in EXT Scraper Seals are available for closed linear bearings, and closed pillow and flange blocks.

Linear Motion Components - LM76 ETX-Scraper Seals!

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – Introducing Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings!

Lintech MR Series, ARC Series, and HRC Series Profile Rails available from Electomate

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control -Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the MR, ARC & HRC series include:

 

  • Size 15, 20, 25, 30, 35, 45
  • N, H and P accuracy grade
  • V0, V1 and V2 block pre-load
  • Short/Normal/Long block lengths
  • Normal and Flange width styles

Lintech’s family of cost-effective short-delivery Profile Rail Linear Bearings includes:

MR Series –Miniature Profile Rail Linear Guides

featuring:

Lintech MR Series Profile Rails available from Electomate

 

  • 2 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • SS bearing, rail, and balls
  • Self-lube reservoir standard

 

ARC Series –Standard Profile Rail Linear Guides

featuring:

Lintech ARC Series Profile Rails available from Electomate

 

  • Application Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

 

HRC Series– Heavy Profile Rail Linear Guides

featuring:

Lintech HRC Series Profile Rails available from Electomate

 

  • Heavy Load Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak atsales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – FDA/USDA/3A-Dairy Compliant ETX Scraper Seals for Linear Bearings Used In Food Processing Applications!

Linear Motion Components - LM76 ETX-Seals!

LM76

E. Longmeadow, MA Motion —  – Linear Motion – LM76 has introduced FDA/USDA/3-A Dairy compliant, snap-in ETX Scraper Seals for linear bearings. Machined from Ertalyte® PET-P, ETX Scraper Seals have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures than seals from other materials. Designed with a slight interference fit between bearing ID and shaft, ETX Scraper Seals prevents contaminates and debris from migrating beneath the seal as it scrapes the shaft surface. Ertalyte® PET-P’s low frictional characteristics have little impact on drive force. These FDA/USDA/3-A Dairy compliant scraper seals are ideal for: Pharmaceutical, medical, food, and dairy processing applications.

EXT Scraper Seals feature a high continuous service temperature up to 210°F (100°C) and offer good chemical and abrasion resistance, low moisture absorption, and resistance to staining. These linear bearing scraper seals keep bearings free from debris and bacterial contamination, are not affected by biological fluids, mild acids, can be washed down with cleaning agents, and steam cleaned. Snap-in EXT Scraper Seals are available for closed linear bearings, and closed pillow and flange blocks.

Linear Motion Components - LM76 ETX-Scraper Seals!

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Simple, Super Low Friction Linear Motion Conveyance System

Transporter 2 Roller Block and Rail system from LM76
lm76-transporter2-block-and-rail-system-01

LM76-Pat-Logo-3

 

 

 

 

 

 
lm76-transporter2-block-and-rail-system-02

 

 

 

 

 

 

 

 

 

 

The Transporter 2 Roller Block and Rail system from LM76 is just that…practical. A black anodized aluminum carriage plate which features 4 plastic wheels pressed over ABEC 1 roller bearings. Transporter’s rail features a ceramic coated aluminum extrusion which offers a hard, extremely durable running surface. Transporter 2 offers 2 carriage plate designs: Option 1 is a standard block with 4) 10-32 mounting holes. Option 2 is a longer and more narrow block with 4) 10-32 mounting holes and a hand lock assembly. This low friction, maintenance free system is superb for sliding doors, manual assembly lines, camera motion and any other applications where low friction motion is required. Transporter is not for high loads or moment loading or for applications which require high speed, critical accuracy or wash down.

 

Load Data

Max  ZO Max YO
15 Lbs. 15 Lbs.
Max Speed 10″ Per Second
  • Machine Tool Sliding Doors

  • Postal Equipment Linear Transporters

  • Monitor Stands

  • Hand/Manual Assembly
    Lines

  • Lab Equipment

  • Syringe Docking/Filling
    Systems

  • Cable&Hose Management System Guidance Trolleys
    (i.e. igus/A&A Gore-Tite)

  • Aerial Pneumatic Tool
    Festoon Followers

  • Table Top Conveyance –
    Arts and Crafts

  • Positioning for Measurement
    Components

  • Cable Reel Followers

  • Furniture Sliders

  • Closet Door Sliders

  • Small Appliance Sliders

  • Rack Shelf Sliders

  • Pulley Dancers

  • Moveable Armrest Sliders for Wheelchairs

  • Small Camera Slider

  • Wall Sliders for Monitors
    and Flat Panel Displays


Carriage Block P/N
 
TPS
( Standard Block)
TPL
Long and Narrow Block with
Hand

 

TPS Standard Block

TPL Long Block

Dimensions



A
±.010
B
±.010
C
±010
D E
1.000 0.620 0.125 0.940 0.500
F Standard Rail Lengths H
Screw Inch
H1 H2 H3
1.500 7,13,19,25,31 # 10 .375 .220 .206
NOTE: Rails are available up to 10 feet long. We will cut special lengths and provide special hole locations if provided a print.
Please call Christine
Carlson 1-800-513-3163
for further information
or email sales@LM76.com

Rail P/N
Length

LR3

?

Part Number Example: LR3-36

1 LR3 Rail – 36″ Long

 

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website

Application Story – FDA/Washdown System Excels with Special Linear Motion Shaft Assembly from LM76!

Linear Motion - Application Story - Dairy

LM76

E. Longmeadow, MA – — Linear Motion – Application Story – Dairy machinery manufacturers are under intense scrutiny by FDA inspectors when it comes to FDA material and caustic washdown compliance. Recently, LM76 was called by a large US dairy packaging company to review a problematic portion of their filling line. After each shift, the filling line is washed-down, has a caustic foaming agent applied to kill bacteria and then is final rinsed. The caustic foaming agent was destroying – literally eating – the aluminum shaft supports while shafting exhibited pitting and showed signs of minor corrosion. Additionally, there were areas where product got trapped and these locations were havens for bacterial growth. Because this system was in-place and our customer was the end-user, LM76 engineers had to use direct drop-in replacement com¬ponents. What to do?

First, we decided to forgo the original bearing system that used 440c stainless linear ball bearings running on 440c hardened shafting. After reviewing loads and speeds we determined that our stainless FDA Compliant, self-lubricating linear bearings would do the job. By choosing sliding friction bearings, we were able to switch the less corrosion resistant 440c with a better 316 stainless shafting while eliminating greasing of the linear ball bearings. To increase shaft hardness, corrosion resistance and decrease “Stick/Slip” of the sliding bearings, we applied an Armoloy coating. This coating raises the shaft hardness from Rb25 to Rc78. Additionally, both the 316 stainless and the coating are FDA compliant. Along with enhanced hardness, corrosion resistance and FDA compliance, this coating has an inherent lubricity that aids in lowering “Stick/Slip”. “Stick/Slip” is a condition inherent in sliding linear bear¬ings. It takes a greater force to move a sleeve bearing linear system from static position than it does to maintain dynamic motion. Thus any assistance in lowering this value is meaningful. Now that we had the correct shafting, we turned our attention to the aluminum shaft support Here we made 2 design decisions:

1. We applied a ceramic coating to the aluminum “T” support. This coating is FDA compliant, is file hard (resists scratching) and is highly corrosion resistant.

2. To enhance system flushing to remove trapped product that could produce harmful bacteria, we segmented the support system to allow for proper evacuation of all washdown solutions and debris.

Linear Motion - Application Story - Dairy

At LM76, we don’t offer a standard catalog product for your special application. We study and isolate the issues, then we design a proper solution. If you have a special application that requires a special touch, call Mike Quinn at LM76 1-800-513-31631-800-513-3163 or E-Mail: mquinn@lm76.com

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman Teflon® Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

Linear Motion - Application Story - Dairy

For additional information on any of LM76’s tandard or custom engineered components contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com