Category Archives: Linear Motors – Three-Phase

Motion Control Stages – Precision Crossed Roller, Brushless Linear Motor Stages!

H2W Technologies Crossed Roller-XY Stage

 

H2W Logo

Santa Clarita, CA —– Motion Control Components – XY Cross Roller Positioning Stages – The XRS-19-09-XY-001 is a XY crossed roller positioning stage uses a brushless linear motor to generate a continuous/peak force of 52.4 lbs [233.1 N] (bottom axis), 52.4 lbs [233.1 N] (top axis) with a total stroke length of 19.0 in [482.6 mm] (bottom axis), 9.0 in [228.6 mm] (top axis). The top axis is able to directly mount to the moving bottom axis motor. This helps reduce the overall height and moving mass of the system. The non-contact 1-micron resolution encoder allows for precise positioning. It is guided by a rigid high accuracy crossed roller bearing.

There are also provisions that allow customer cables to be routed within the cable carrier. It has end-of-travel rubber bumper stops. A home positioning sensor, end-of-travel-sensors, and custom mounting holes on the moving table are available upon request.

The stage consists of two stacked Single Rail Positioning Stages:

Bottom Axis – XRS-019-11-050-001

Top Axis – XRS-009-10-050-001

Specification Table Axis Differentiation: Bottom Axis / Top Axis

Product Drawing
Motor P/N n/a
Stroke 19.0 / 9.0 in 483 / 229 mm
Encoder Resolution 0.1 micron
Bearing Type Crossed Roller
Moving Mass 14.3 / 13.0 lbs 6.5 / 5.9 kg
Total Mass 72.2 / 51.4 lbs 32.7 / 23.3 kg
Resistance @ 20C 8.0 ohms
Inductance @ 20C 10.0 mH
Electrical Time Constant 1.3 msec
Motor Constant 4.4 lbs/vwatt 19.6 N/vwatt
Force Constant 12.3 lbs/amp 54.5 N/amp
Back EMF 1.6 V/ips 63.0 V/m/sec
Force @ 100% Duty 52.4 lbs 233 N
Power @ 100% Duty 142 watts
Current @ 100% Duty 4.3 amps
Force @ 10% Duty 157 lbs 669 N
Power @ 10% Duty 1278 watts
Current @ 10% Duty 12.9 amps
Stage Length 35.0 / 23.0 in 889 / 584 mm
Stage Width 10.7 / 9.9 in 273 / 253 mm
Stage Height 3.1 in 77.5 mm

For short stroke, compact positioning stages please see our Voice Coil Positioning Stages.

To determine your motion profile needs, use our Linear Motion Calculator.

YouTube Video

https://youtu.be/-SGIMuaE4ws

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

 

Motion Control – High Acceleration, High Precision, Brushless Linear Motors from Moticont!

Motion Control - Moticont-brushless-linear-motors-lbim-021

Van Nuys, CA – Motion Control Components – The off-the-shelf, LBIM-021 Series of Linear Three-phase Brushless Servo Motors from Moticont are sized to fit a broad range of linear motion applications. These low cost, compact linear motors feature: High acceleration, high speed, high accuracy, high repeatability, and high precision to less than one micron (0.00004 in.). The LBIM-021 Linear motor series is comprised of four sizes of forcers (the moving part of a linear motor) and matching magnetic tracks creating forces of 8.7 lbs (38.7 N), 16.3 lbs (72.4 N), 23.1 lbs (102.9 N), and 31.0 lbs (138.1 N) at 10% duty cycle. The light weight ironless forcers have no iron providing high acceleration, low inertia, and cog free motion. These high speed, non-contact brushless linear motors are ideal for a variety of: Medical, manufacturing, scanning, inspection, laser cutting, and precision assembly applications.

H2W Logo
Visit our Website
You Tube
Visit our Blog
MotiCont-Logo

Clean room and people friendly, these clean, non-commutated, quiet linear servo motors are easily integrated into new and existing applications. Modular magnetic tracks, available in four standard and custom lengths, can be assembled to create unlimited stroke lengths, additionally; multiple forcers can operate in the same magnetic track with overlapping travels. LBIM-021 Series Linear Servo Motors can be commutated in a trapezoidal or sinusoidal mode and can be ordered as complete plug-and-play systems, including, position sensors, controllers, amplifiers, and power supplies. Other sizes of linear motors and custom designs are also available from Moticont.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos