Category Archives: Miniature Components

Motion Control Application – Congratulations to Emirates Team New Zealand – Winner of the 36th America’s Cup!

Motion Control Application – Motors

They have gone and done it again. Emirates Team New Zealand have retained the America’s Cup over the Italian Challenger Luna Rossa Prada Pirelli.

motion contyrol - motor application


motion control - maxonTaunton, MA — Motion Control Products – maxon Group extend their heartfelt congratulations to Emirates Team New Zealand. In the historical 36th America’s Cup that endured extra challenges including Covid-19, race cancellations and delays meaning interruptions and last-minute tactical changes, the Kiwis have retained the oldest trophy in international sporting history.

Motion Control – Maxon precision motors Go to Mars AGAIN!

Motion Control – Maxon motors on Mars!

motion control - miniature motors

Taunton, MA — Motion Control Products – NASA’s Perseverance rover landed on Mars on February 18th. Was there once life on Mars? This is the question that one of the most complex robotic systems ever built by humankind has set out to answer. Several of maxon’s electric drives are used for handling the soil samples—and to control the first Mars helicopter.

motion control - maxon motors

Will NASA, the US space agency, successfully land a fifth rover on Mars, allowing it to start its series of missions to bring Mars soil samples back to Earth? The rover named Perseverance will enter the atmosphere of the Red Planet on February 18th—after traveling a distance of more than 470 million kilometers.

If everything goes according to plan, Perseverance will land in the Jezero Crater, which was once filled with water, to search for traces of earlier life. The rover looks a lot like its predecessor Curiosity, but it is equipped with more sophisticated measuring instruments and systems. One of its tasks will be to take up to 30 soil samples, place each of these in separate containers, seal them and place them on the surface of Mars for retrieval and return to Earth by later missions in which maxon will also be involved. This “Mars Sample Return” project is by far the most complex series of missions in the history of unmanned space exploration.

NASA’s Jet Propulsion Laboratory (JPL) is responsible for Perseverance and is counting on technology from maxon to handle the samples. There are ten electric drives in the rover. These are responsible for moving the robotic arm that navigates the samples from one station to the next. Additionally, the motors are used for sealing the containers and placing them on the surface of Mars.

Drives responsible for mission-critical tasks

motion control - mars motors

Just like the more than 100 existing maxon drives that have been reliably performing their duties on Mars, the motors for Perseverance are based on standard catalog products: specifically, nine brushless DC motors, the EC 32 flat and one of the EC 20 flat motors combined with a GP 22 UP planetary gearhead.

The engineers at maxon closely collaborated with the specialists at JPL for several years to modify and extensively test the drives. The robotic arm on which the BLDC motors are mounted as well as the gripper are critical to the application and the success of the mission.

motion control - miniature motor application

maxon is also on board the first Mars helicopter

A drone helicopter called Ingenuity is attached to the underside of the rover. Ingenuity is destined to perform the first ever flights on Mars in the history of space exploration. It is solar powered and weighs only 1.8 kilograms. Six brushed maxon DCX motors with a diameter of 10 millimeters control the tilt of the rotor blades, which determines the direction of flight. The drives feature high energy efficiency, are dynamic and very light. “In the development phase, we performed extensive tests to make sure that the motors will work as intended under the extreme conditions on Mars,” says Florbela Costa, project manager for this helicopter at maxon.

With this experiment, NASA wants to test the concept for future drone flights. Flying on Mars is a challenge. The atmosphere is extremely thin, roughly comparable to the conditions on Earth at an altitude of 30 kilometers. The first drone flights are scheduled for May. Space applications only constitute a small portion of maxon’s orders, but the high requirements push maxon to the next level. This is evident in the increased quality standards, as well as new testing methods and processes, which in turn also benefit customers in other areas, such as medical technology. “Apart from this, such space missions are simply incredibly fascinating,” says Eugen Elmiger, CEO of the maxon Group. “Time and time again, I feel honored and proud that our drives are used in these technically groundbreaking Mars missions.”

For additional information Go to:

NASA Pererverance Lander and Helicopter

Five Challanges Electric Motors Most Overcome on Mars

Notes on Photographs

The Perseverance rover and the Mars helicopter Ingenuity. © NASA/JPL-Caltech The Perseverance rover and the Mars helicopter Ingenuity. © NASA/JPL-Caltech

The robotic arm moves the soil samples to the volume assessment and scanning stations, then to the sealing station, and finally into temporary storage—all autonomously. © NASA/JPL-Caltech

The robotic arm moves the soil samples to the volume assessment and scanning stations, then to the sealing station, and finally into temporary storage—all autonomously. © NASA/JPL-Caltech

Left: The modified EC 32 flat drive. Nine of these drives are used in the Perseverance rover. Center: The EC 20 flat with GP 22 UP gearhead. Right: DCX 10 motors move the swashplate, which in turn controls the tilt of the rotor blades of the Mars helicopter. Image credits: maxon

Left: The modified EC 32 flat drive. Nine of these drives are used in the Perseverance rover. Center: The EC 20 flat with GP 22 UP gearhead. Right: DCX 10 motors move the swashplate, which in turn controls the tilt of the rotor blades of the Mars helicopter.

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

About Maxon

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

Maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

This year, the COVID-19 pandemic has led to the cancellation of nearly all trade shows. Despite this, maxon is offering a digital trade show experience to all of its customers and anyone who’s interested in learning about the latest in drive technology. Visitors to maxon’s virtual booth will discover the benefits of our latest products such as the MiniMACS6 master controller, learn about high torque brushless DC motors as well as flat motors for robotics, and get to know the Mars rover. Visit virtualbooth.maxongroup.com and contact us to get your ideas moving.

Maxon Motion Control Virtual Booth

If you prefer watching an entertaining video introducing all the latest products maxon brought to the market this year, you will find it here: https://youtu.be/Jtw7Hwxbdr4 a> Have fun watching! For more information please contact us at info.us@maxongroup.com or 508-677-0520.

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - miniature maxon motors


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

View 2020/2021 Maxon Catalog

motion control - maxon motors

 

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Control – Miniature Electric Cylinder

motion control - electric cylinder

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long.

motion control - moticint

This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Also called an Electric Cylinder, this linear actuator has a threaded 2-56 UNC-2A shaft for a backlash free connection. The housing and coil each have 2 2-56-UNC-2B threaded mounting holes on 0.25 in (6.35 mm) centers. The built in centered shaft facilitates the commissioning of the motor for easy integration into current and future applications.

This clean, quiet, efficient, low inertia, high reliability actuator is ideal for: Heptic feedback and pipetting in medical devices, switch activation, testing, sorting, assembly equipment, work holding and clamping, scanners and laser beam steering and filtering, laser, machining and drilling, optical focusing, and dynamic vibration absorption. Moticont also offers DC and servo motor drivers.

Is there a need for a higher force or longer stroke? There are currently 7 series of Moticont GVCM motors based on diameter of this motor.

To find the right motor for you application go to: http://moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticint

 

 

Motion Control – Maxon drives are heading to the Red Planet with NASA’s Perseverance Rover!

Motion Control – Application – Maxon drives heading to the Red Planet!

In July, NASA will be sending its fifth rover to Mars. Its main mission is to collect soil samples that will be analyzed on Earth at a later time. The rover will also carry a helicopter that will perform the first flights on the Red Planet. maxon’s precision DC and BLDC motors will be used for numerous mission-critical tasks.

motion control - maxon motors

 


motion control - maxon motorTaunton, MA — Motion Control Products & Application – maxon drive systems are very familiar with Mars. Our drives have been used in virtually every successful robotic mission over the last three decades. There are now more than 100 of them on the Red Planet and there are likely to be more soon. The launch window for NASA’s next mission opens on July 22nd. An Atlas V rocket will launch the new Perseverance rover on its way to Mars, where it will be searching for signs of previous life on the planet. Its most important job is to take multiple soil samples, seal them in containers and deposit them on the surface of Mars so that a future mission can return them to Earth. Several maxon motors will be used to handle the samples inside the rover. For example, maxon DC motors are installed in the robotic arm, which moves the samples from station to station. Maxon motors will also be used for sealing and depositing the sample containers.

NASA’s Jet Propulsion Laboratory (JPL), is carrying out the mission, and have asked maxon to produce 10 drives for the rover. As with almost all previous Mars missions, these drives are based on standard products from maxon’s catalog with modifications. For the first time, NASA is using brushless DC motors, including: nine EC 32 flat and one EC 20 flat in combination with a GP 22 UP planetary gearhead. Working closely with JPL specialists, maxon engineers developed the drives over several years and tested them thoroughly to achieve the highest standards of quality. “We’ve learned a lot from this exciting project,” says Robin Phillips, head of the maxon SpaceLab. “We now have very broad expertise in space applications and have established quality assurance processes that meet the expectations of the industry. Customers from other industries such as the medical sector, where requirements are often similar, can also benefit from this know-how.”  Space missions place the highest demands on drive systems. This includes vibrations during the rocket launch, vacuum during the journey, impacts on landing, and the harsh conditions on the surface of Mars, where temperatures fluctuate between -125 and +20 degrees Celsius and dust penetrates everywhere

Maxon DC motors control the Mars helicopter.

motion control - maxon mars motor

The Perseverance rover is expected to land on Mars on February 18, 2021 – but it won’t be alone. A drone helicopter called Ingenuity will be attached to the underside of the rover. It weighs 1.8 kilograms, is solar powered and will perform several short flights, as well as take aerial images. The main goal of this experiment is to test the concept for further drones of this kind. maxon has six brushed DCX motors with a diameter of 10 millimeters controlling the tilt of the rotor blades and the direction of flight. The drives are very light, dynamic and highly energy-efficient. These properties are crucial, because every gram counts on the Mars helicopter. Flying on Mars is not easy. The atmosphere is extremely thin, roughly comparable to the conditions on Earth at an altitude of 30 kilometers. The drone helicopter has flown in a simulated test environment in the JPL laboratory. Whether it will lift off on Mars remains to be seen. First, other obstacles, such as the rocket launch, must be successful. “We hope that everything goes well and that we’ll soon see our drives in action on Mars,” says maxon CEO Eugen Elmiger. “We’re all keeping our fingers crossed.”

motion control -maxon miniature motors

For additional information, please contact us at info.us@maxongroup.com or 508-677-0520.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com/maxon/view/content/index

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - handbook


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – Maxon Gearheads – Great power in Compact Form!

Motion Control – Maxon Gearheads – Great power in Compact Form!

motion control - gearhead cutawayMicro gearheads from maxon with improved efficiency.

 


motion control - maxonTaunton, MA — Motion Control Products – Maxon has developed a unique upgrade in the form of a new product series for its standard micro gearhead: A wide range of performance improvements offer new opportunities.

The first ideas for the UP-gearhead were inspired by ESA’s Mars project ‘ExoMars’ and NASA’s ‘Mars 2020’ project, where there was a need to ensure the highest possible availability even in extreme environmental conditions.

This also directly affects further parameters of the drive system: Given the same input power, ie. using the same motor and the same motor control system, the gearhead can deliver 30% more torque. Or put another way: the same output power will require 23% less input power for the drive. This results in longer potential action time until the next charge cycle, particularly for battery-driven applications.

As a result of the reduction in the input power required, the used motor can in addition be operated at a more favorable operating point. This factor also improves the efficiency of the motor, and with it the whole drive system.

As an alternative, smaller and/or lighter motors and electronics can be used, with advantages not only in terms of weight but also in terms of cost.

motion control - gearhead groupSignificantly longer gearhead service life: as outlined above, friction in the planetary wheel – axle system could be considerably reduced. At the same time heat generation from operating the drive is noticeably reduced because there is less friction power. Particularly in applications where temperatures should not exceed a certain level (example: medical power tools), there is improved power output.

The durability of the lubricant plays an important part in terms of wear and tear on the gearhead’s mechanical components. The greater the thermal stress, the more quickly its lubricating properties are lost, and the earlier and more serious the abrasive behaviors in the mechanical system. The abraded metal particles also lead to an agglutination of the lubricant, potentially resulting in a breakdown in its lubricating action.

If the heat feed is checked, then in otherwise identical operating conditions a longer service life can be achieved. This effect is an outstanding feature of the GPX UP: the service life is 5 times greater compared with similar traditional maxon gearheads and when compared to competitors’ models currently on the market it is 11 times greater.

As an alternative to longer service life, as a result of significant improvements in the torque to diameter ratio (power density), much smaller and lighter gearheads can be used.

The advantages of the new design are not only producing improvements in the gearhead specification’s individual parameters. Further new applications for the GPX UP gearheads can also be seen, in particular the so-called force-feedback appliations.

With these applications the advantages of the engineering of the GPX UP version come into play. The use of mounted planetary wheels makes smooth inverse rotation of the gearheads possible in normal operation and, if necessary, can provide operator feedback. Quantifiable and tangible mechanical feedback is in fact conveyed to the force and torque elements. To achieve this, the gearhead needs to be reversible, meaning the torque and changes to the torque which are in contact with the output side, need to be conveyed proportionally to the drive side.

The following example demonstrates this application: In electronic flight control (Fly-by-Wire), the pilot’s steering movements are not transmitted to the actuators mechanically or hydraulically, as in conventional systems, but electronically. But with this the operator initially loses all tangible feedback on their steering movements. With the deployment of a drive in the control column, the electronically transmitted feedback is mechanically conveyed to the pilot’s hand. Inverse rotation is particularly necessary in normal operation, because the additional drive installed should not hinder the movements of the control column.

motion control - gearhead applicationA similar process applies to the innovative surgery robots in the micro- and telesurgery range. Here it is also crucial that the operator receives direct and tangible feedback about the movements they have performed or healthy tissue that should be left untouched. Reversible drives are also in demand in plant construction. In setting mode the axles need to be movable from the output side, without current.

The new GPX UP models combine a range of important product advantages, such as: More power, more torque, improved efficiency, considerably longer service life, reduction in heat generation, less weight in the drive system as well as the additional reversibility function in multistate gearheads.

Taking only the first two factors into account, we might refer to them as ultra-power gearheads. But with the other properties listed here, we can easily coin a new title: ultra performace.

Ultra Performance GPX gearheads from maxon are already available in GPX22 UP und GPX32 UP diameters, and like all ‘X-series’ they are customizable and available to order online. The GPX42 UP version will follow in Spring of 2020. In addition, customizable gearheads in the Ultra Performance series are now available in sizes Ø 8 – 58 mm.

For more information, please contact us at: info.us@maxongroup.com or 508-677-0520

About Maxon

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

Maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.



See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – Linear Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Accelation!

Motion Control – Miniature Stage

motion control miniature stage

 

Equipment Soultions

Forestville, CA – Motion Control – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

The VCS-1010D motion control linear position stage (pictured) features a 10 mm clear aperture and a 1 μm resolution digital position sensor, with differential quadrature outputs and a center index pulse. The highly responsive, frictionless voice coil motor has been optimized to keep the moving mass as low as possible for the fastest response times, and it has the lowest electrical noise of any motor type.

Motion Control Miniature stage with lens

These compact 76 X 41 X 38 millimeter motion control stages weigh only 255 grams and can be operated horizontally or vertically. Multiple sets of mounting holes allow for easy integration into new or existing applications. These versatile VCS-10 linear positioning stages can be custom configured to meet the users requirements. As an example, is the custom VCS-1010D (pictured right) with a 6mm lens and manual cross-axis adjustments.

Equipment Solutions is a leading authority in the field of voice coil motion control. Recognizing that exceptional performance can only be achieved through a system level approach, ESI also has extensive servo electronics expertise. Equipment Solutions motors and actuators are used in markets ranging from applications where our actuators delicately guide a laser beam over an eye as part of a vision enhancement procedure to military hardware that is battlefield certified, and everything in between.

motion control - VCS10101 specifications

Motion Control VCS1010 Line drawings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

With a time-to-market as short as four weeks, Equipment Solutions has maintained innovative, high quality products. Equipment Solutions, never loses sight of the value of listening very carefully to client input, nurturing a cooperative working relationship, understanding the big picture but never losing sight of the small details that describe it, and perhaps most importantly, following through with after delivery support.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://EquipmentSoultions-Blog.com

Equipment Soultions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog

Drive specialist maxon, renowned for its Mars motors, is joining forces with the robotics startup ANYbotics!

Motion Control – Maxon and ANYbotics form New Partnership!

Motion Control Drive specialist maxon, renowned for its Mars motors, is joining forces with the robotics startup ANYbotics and will in future supply the drive systems of the autonomous ANYmal inspection robot. The robot will soon be marketed in large quantities. This cooperation will also benefit maxon, since ANYbotics provides important robotics know-how and is currently the most successful young company in this field.

motion control - maxon to supply drive systems

 


motion control - maxonThe maxon Group contributes 60 years of experience in drive technology to the partnership, as well as a global production infrastructure and validated processes, and will help to advance the industrialization and commercialization of ANYmal – with competitive, high-performance drive systems, twelve of which are used in each robot. “In maxon, we have found the ideal partner for taking care of our drive technology as we transition from small series to mass production. With maxon’s expertise and infrastructure, we will be able to further optimize a core element of our robots and access state-of-the-art production methods,” says Péter Fankhauser, CEO of ANYbotics.Taunton, MA — Motion Control -A solid partnership: maxon and ANYbotics are entering into a close, long-term collaboration and are thus strengthening Switzerland as a prime location for robotics. One of the decisions made by the two partners is that maxon, as global drive specialist, will handle the future development and production of the actuators for ANYmal. ANYmal is an autonomous, four-legged robot that is capable of inspecting and monitoring industrial systems and is destined to also take on dangerous maintenance tasks in the future. The robot can even cope with difficult infrastructures such as stairs and inclines, and is used in a wide variety of industries.

ANYbotics recently won the Swiss Economic Award 2020 and has been chosen as the best young entrepreneur in Switzerland in the Hightech/Biotech category. The company has valuable experience in robotics – a market that offers great potential for maxon. Eugen Elmiger, CEO maxon Group, says: “By collaborating with ANYbotics, we are merging know-how from different worlds. The creativity and high responsiveness of a startup are paired with the global and stable industrial environment of the maxon Group. Together we will create an energy-efficient and intelligent robotic drive, the likes of which has never been seen before.” To further cement the partnership, the two companies are also getting closer geographically: maxon, which has its headquarters in the canton of Obwalden, is opening a lab at the Züri.ch Campus in the Oerlikon district of Zurich, in close proximity to ANYbotics. Here the engineers and technicians will meet to discuss the progress on their projects. Additionally, maxon wants to use the lab to get even closer to ETH Zurich and the University of Zurich, offer technical support to young engineers, provide workspaces, and get talent on board. Eugen Elmiger says: “We are already heavily involved with vocational education in and around Zurich and Lucerne. With the new lab, we will be in an even better position to support talents in drive technology and robotics.”

The Swiss specialist for quality drives

Maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

 

ANYbotics: Mobile robots for industrial applications

ANYbotics AG is a young company that develops autonomous robots that independently inspect and monitor industrial systems. ANYbotics was born in 2016 as spin-off from ETH Zurich. It was founded with the purpose of commercializing the technology behind the four-legged ANYmal robot. Today, ANYbotics is one of the world’s leading developers of mobile robotics for complex industrial environments. A staff of 50 develops and markets the technology for use in the energy, process and construction sectors.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.



See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – Protection Against Contamination: Breathing Clean Air!

Motion Control – Protection Suit Motor!
Maxon DC motors are used in the blower components of high-quality protection suits.

motion control - Maxon Motor

 


motion control - maxonMaxon was selected for the compact and lightweight DC motor design, ironless winding, strong magnet and producing very little vibration and noise output. Most importantly, a brushless DC motor was mandatory as a brushed motor may cause sparks that would ignite within the suit. When designing the suit, special attention was given to the placement of the blower unit sewn inside the suit, to avoid the need for heavy straps or air supply hoses. A Li-Ion battery provides more than four hours of operation of air supply with a flow up to 600 liters per minute.Taunton, MA -Motion Control – Protection suits containing an air blower element that fills the entire suit with clean air, have been used by health professionals when faced with contaminated environments. The COVID-19 pandemic is an unprecedented situation where these type of suits have been utilized. Maxon DC brushless motors are found inside these specialized suits. The DC motor is efficient, high-speed and robust.

 

For more information please contact maxon motor Australia tel. +61 2 9457 7477.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.



See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control- A Wide Variety of High-performance Drives from Maxon Motor!

Motion Control – High Performance Drives

maxon, high precision drive specialist, launches high-torque product innovations this Spring. These include higher performance flat motors, drives with higher torque output, and new additions to the GPX gearbox family.

motion control maxon motor

 


motion control - maxonAnother addition to the EC-i family includes the, EC-i 40 High Torque 130 watt brushless motor. This drive was originally developed for power tool applications. To meet the high demand for higher-torque drives, maxon is mass producing the EC-i motor with an additional 34.8 mm in length. The versions with a fan offer up to 100 percent more power.Taunton, MA — Motion Control Components -The new, maxon EC-i 52 Power up brushless motor meets customer demands for industrial applications with higher torque. The new version of the EC-i 52 now achieves a torque of up to 1 Nm. This increase in performance is due to improved cooling, the ventilated version of the EC-i 52 Power up reaches 420 watts of nominal power.

If required, the EC-i drives may be combined with encoders, gearheads, and a maxon controller in our easy to use online shop: shop.maxongroup.com

EC 45 flat Power up – higher-power flat brushless motor

Using new processes, maxon has developed a rotor for flat motors whose housing is produced by cold forming. The result is the more powerful and less expensive EC 45 flat Power up motor, it is available in two standard versions, as well as in two new versions with either an open rotor or a fan.

Motion Control High Performance Drive

motion control drive from Maxon

ECX Torque 22: Dynamic brushless motors

Brand new additions to the market are the brushless maxon ECX TORQUE motors, which have a diameter of 22 mm and are available in three different lengths. With their iron core and multi-pole rotor design, these motors achieve a very high torque density at moderate speeds, while their low time constant makes them extremely dynamic. The ECX TORQUE motors are available as configurable units ready for shipment in 11 working days.

 

Motion Control - Maxon High Performance motor

 

 

 

 

 

 

 

Ultra Performance gearhead

A new addition to the GPX gearhead family. In addition to the existing diameters of 22 mm and 32 mm, maxon is launching the larger GPX 42 UP gearhead version. The GPX UP “Ultra Performance” gearheads are extremely efficient.

motion control brushless motor

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.



See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – Use FDA Compliant Off-the-Shelf Linear Motion Components!

Motion Control – FDA Compliant Components

To: OEMs “Tooling Up” for Urgently Needed Medical Products! Use FDA Compliant Off-the-Shelf Linear Motion Components!

motion control FDA compliant components

 

LM76

E. Longmeadow, MA — Motion Control Components – Linear Motion – In dealing with the COVID-19 pandemic many companies have volunteered or been requested to produce urgently needed medical products such as: Masks, gowns, and ventilators. “Tooling Up” quickly to produce medical grade products for some companies can bring challenges. In addition to needing FDA compliant materials that will be used in the actual masks, gowns, and ventilators, the tooling used to manufacture these products may also need to meet FDA compliance standards. Depending on the product being manufactured, the tooling may need to be: Washed down using caustic chemicals, cleaned with high pressure steam, or sterilized with high Intensity Ultra Violet light or radiation.

Ordering custom FDA compliant linear motion slides and XYZ stages can result in long delays. As an alternative, many companies have linear motion slides in stock for immediate delivery, however, they may not be FDA compliant. In many cases it is the bearings that are not in compliance. LM76 manufactures several types of FDA compliant linear bearings and pillow blocks that are drop-in-replacements for existing bearings. FDA compliant bearings and pillow blocks from LM76 will not trap contaminating debris and can be thoroughly sanitized following Sanitation StandardOperating Procedures (SSOPs). SSOPs are detailed schedules and procedures specifying what to clean, how to clean, how often to clean, and the record keeping used for monitoring.

A helpful component selection guide from LM76, “Linear Bearings, 6 Simple Steps – FDA Compliance, Wash Down Compliance,” details the linear motion components available from LM76 that are FDA/UDSA/3A-Dairy compliant. Included are: Foodstream electroless nickel plated pillow blocks, PTFE lined stainless steel bearings, ceramic coated linear bearings, self-aligning corrosion resistant linear ball bearings, and Thomson® Super SmartTM corrosion resistant, self-aligning, high load linear ball bearings, and solid ETX pillow block/bearings. Shafting to compliment the type of bearing selected includes: Class L Stainless 303/304/316, 440C case hardened stainless, Rc 60 case hardened steel with an Armoloy coating and also Rc78 Class L for enhanced hardness and wear resistance. End blocks and shaft supports that have a ceramic or electroless nickel coating are also available, as well as new ETX Scraper Seals that prevents intrusion of contaminates adding another line of defense.

LM76 also designs and custom builds linear slides from Stainless Steel and other FDA wash down compliant materials.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com


See this and other Motion Control Components from LM76 featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://LM76Blogger.com


LM76
Visit our Website
Order Our Catalog

 

 

Motion Control – Compact, High Resolution Resonant Scanner Features Wide Frequency Range and Fully Integrated Control & Drive Electronics!

Motion Control – Resonant Scanner

motion control resonant scanner

 

Equipment Soultions

Forestville, CA — The RS-25 Resonant Scanner from Equipment Solutions is optimized for applications that typically require a means to scan an optical beam. This motion control resonant scanner is a very efficient means of oscillating or vibrating a mirror or similar load at a fixed frequency. Up to a 25 mm diameter mirror can be set at the factory to oscillate at a fixed frequency of 20 Hz to 550 Hz, and mirror sweep can be adjusted to a total of 90 degrees optical. The very compact RS-25 Resonant Scanner measurers just 25 x 58 x 21 mm and all electronics necessary to control and drive the scanner are fully integrated. Typical applications include: 3D laser digitizing & measurement, printing, raster scanners, laser projectors, laser marking, laser range finding, barcode scanning, confocal microscopy, FLIR, retinal image acquisition, semiconductor inspection, laser tuning, and biological and medical research.

The RS-25 Resonant Scanner can optionally be configured with a very high-resolution position sensor. This non-contact electro-optic sensor provides a means to directly monitor the angular position of the user’s load with micro-radian scale resolution and repeatability. The sensor naturally produces an analog signal proportional to position and is noise limited, however, options include a high-resolution 16-bit Analog-to-Digital converter to quickly sample and report the mirror position (up to 1500 samples-per-second) at any time.

Unparalleled performance and reliability have been achieved through a continuous and careful attention to every design detail. This relentless drive has generated patent pending concepts and ideas that distinguish the RS-25 Resonant Scanner. The RS-25 Resonant Scanner has a virtually unlimited life. Carefully designed flexures mimic a conventional spring-mass harmonic motion system, and a small voice coil motor coupled to the system compensates for small system loses that would otherwise dampen the oscillation.

Two connectors are accessible from the side of the unit. One, a mini USB connector, supports high speed USB communications and power sourcing. The second connector provides electrical control and signal interfaces (e.g. analog amplitude control and feedback (e.g.) mirror position).

Additional features include: Very low power drive electronics (low heat emission), vertical or horizontal mounting, high frequency stability (to 0.05%), broad frequency selection, no wearing parts, shock and vibration tolerant.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://EquipmentSolutions-Blog

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Equipment Soultions
Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool
View Equipment Solutions Motion Control Blog

Motion Control Application – Implantable medication delivery systems: Where every microliter counts!

Motion Control – Application

Implantable medication delivery systems can have a decisive influence on the quality of life of the patients. In many cases, such delivery systems are vital for the survival of the patients – the systems have to be absolutely reliable. maxon motor manufactures high-precision micro drives for medication delivery systems.


motion control - maxonFall River, MA — Motion Control Components Application – Patients that suffer from chronic pain, metabolic disorders, diseases of the central nervous system and tumor diseases require accurately dosed medication. Here implantable medication delivery systems are used. Through the localized medication delivery, the dosage can be reduced to the required minimum. These infusion systems thus improve the quality of life of the patients. For many patients, it is only the medication delivery system that allows them to have a life outside of the clinic. Repetitive invasive, painful operations can be avoided. The risk of medication dependency and undesired side effects are reduced to a minimum. All these factors can contribute to the disease no longer being the central focus of the patient’s life.
motion control application - implantable pump

For example, an active implant is implanted in the lower abdomen directly underneath the skin, where it delivers the medication dosage, programmed by the physician, to the body at the defined times of the day. The implantable unit has a wireless data interface to a patient interface by which the dosage can be adapted at any time. At regular intervals, the internal medication reservoir can be refilled by a specialist. The life span of the active implants measures many years and is limited only by the life of the battery. The core of the active implant is a piston pump manufactured by maxon medical, which specializes in medical technology and is a division of the maxon motor Group. However, the micro drives for implantable medication delivery systems are not comparable with customary maxon motors. In a customary motor, rotary motion is generated and yields torque and speed of rotation.

maxon miniature piston pump

The reciprocating piston pump generates a linear movement that results in liquid pumping. The individual parts of the pump have very narrow tolerances and allow the pump volume to be adjusted with a precision of less a microliter per piston stroke.

As active implants are in direct contact with human tissue, biocompatible materials are an absolute requirement. Therefore, in most cases, titanium is used for the implants. Machining of titanium, especially safe and reliable laser welding, requires a very high level of expertise. Special testing and quality methods, such as inspecting the penetration depth, microhardness and density of the weld seams, are established procedures at maxon medical. The customer requirements on the product are thus fulfilled and the reliability and constant quality of the manufacturing processes are guaranteed. The entire assembly of the implantable micro drive takes place under cleanroom conditions.

maxon medical – Specialist for medical drive solutions and active implants

maxon medical specializes in the manufacturing of medical drive solutions for active implants. The division received ISO 13485 certification in December 2008. The quality management system and the project organization ensure safe, reliable and standard-compliant products and provide the customer with a sound basis for statutory approval of the final products.

Professional project organization and a proven risk management system allow efficient implementation of customer projects. Strict maintenance of statutory requirements has top priority in the implementation of medical technology projects with risk class IIb + III. Production processes, production systems and testing systems always fall under GMP (Good Manufacturing Practice, Commission Directive 2003/94/EC), regardless of the classification of the product.

maxon medical meets highest customer requirements – from selection of suitable suppliers to multi-tier quality control, from the individual parts to the final product. Manufacturing processes in the field of medical technology have very high documentation requirements during the entire value-added chain. All the way from the project idea to series production. In the end, a comprehensive and detailed documentation of all processes is required, including verification of process capability and traceability right back to the individual parts. This process control, matured to the last detail, characterizes maxon medical. It is an important and indispensable component of the entire production process and guarantees the high quality of the micro drives used for active implants of maxon medical.

Contact maxon for more details info@maxonmotorusa.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – Maxon’s New EPOS Programmable Smart Drive/Controller – “Positioning Made Easy” are Available from Electromate!

Motion Control – Miniature Drive/Controller
Motion Control EPOS Controllers

 


motion control - ElectromateVaughan, Ontario, Canada — Motion Control Components — EPOS is a modular, digital positioning controller by maxon motor. It is suitable for controlling permanent magnet-activated motors with encoders in a range of 1 to 1050 W continuous output power. The wide range of operating modes, as well as various command interfaces, make it versatile for use in many different drive systems in the fields of automation technology and mechatronics

With the EPOS4 Compact 50/8 EtherCAT and EPOS4 Compact 50/15 EtherCAT, maxon launches the first compact devices compatible with the fast industrial Ethernet connection EtherCAT. The fully integrated, plug-and-play positioning controller in a compact design is perfectly suited for use in networks with cycle times up to 1 ms.

Powerhouse with excellent control characteristics

The functionality, operation, software, and accessories of the new controllers are derived directly from existing products in the EPOS4 range. The devices are suitable for use with both brushed DC and brushless EC motors (BLDC) and come with comprehensive feedback options such as Hall sensors, as well as incremental and SSI absolute encoders. State-of-the art concepts such as FOC, feed forward, and observer control allow optimal control in a wide variety of applications.

Comprehensive functional scope and easy operation

The existing digital and analog inputs and outputs are freely configurable and ideally matched to the numerous functions and operating modes of CiA-402 positioning controllers. Products are set up using the EPOS Studio graphical user interface (Version 3.4 and higher) for Windows PCs. In addition to the intuitive commissioning software, Windows DLL and Linux Shared Objects libraries are freely available to make integration into a wide variety of master systems as easy as possible.

Motion Control - Maxon EPOS Controllers
Electromate offers Maxon EPOS Controllers

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate logo

Motion Control Application – Driver assist systems can help save lives by alerting driver of potential danger!

Motion Control – Application – Driver Assist Systems Help Save Lives!

 


motion control - maxonMaxon A-max 16 brushed DC motor – This drive with a diameter of 16 millimeters (precious metal brushes, 2 Watt) was developed for use with an eccentric weight and a specified bearing.
motion control - application - brushed motors

Fall River, MA — The majority of traffic accidents are caused by human error. In the future, computer-controlled cars will significantly reduce the number of such accidents. Driver assist systems, such as adaptive cruise control (ACC), brake assist systems, or lane departure warning systems (LDW), can save lives. Lane departure warning systems warn the driver if the vehicle is drifting out of its lane. The LDW determines the vehicle’s position in the lane with the use of various optical sensor systems and computers. If the car is in danger of drifting out of the lane, the system activates an electric motor in the steering wheel that causes the wheel to vibrate, warning the driver.

A luxury car manufacturer has engaged maxon to supply the motors for this application. The base DC brushed motor is maxon’s A-max 16 (precious metal brushes, 2 W), modified for the application with an eccentric weight and a specified bearing. In order to prevent the other vehicle systems from being affected by the electromagnetic fields of the motor, it has been equipped with special EMI suppression for automotive applications. The small drive system must meet specific requirements: It needs to be low-noise, dynamic, feature high power density, and fit in a narrow space – requirements that maxon’s small A-max 16 easily masters..

Contact maxon for more details info@maxonmotorusa.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – EC-i 52XL 200W High Torque Brushless Servo Motor from Maxon!

Motion Control – Brushless Motor 

motion control miniature brushless motor

 

Motion Control - Electromate-Logo

The new EC-i 52XL 200W Brushless Servo Motor from maxon is a powerhouse.  When space is limited but high torque and dynamics are required, the maxon EC-i 52XL motor is the ideal motor choice.. 

Vaughan, Ontario, Canada — Motion Control Components — With its extended length (80 ? 110mm), this motor with flux collector rotor provides outstanding torque performance compared to the existing EC-i 52 180W High Torque that is often needed, especially on the industrial automation front.

Its extra power can be even more significant at relatively low speed which makes it a powerful fit to a variety of industrial applications including material handling & transport systems.

Because of its optimized magnet ring, the brushless EC-i 52XL motor with an iron winding offers a very high torque density and a low cogging torque.  The multi-pole internal rotor is extremely dynamic.  Its solid design, with a steel flange and steel housing, makes this motor a robust solution for industrial applications.

Features include:

  • Cost-effective
  • 200 Watt Rated
  • 24, 36 & 48VDC windings
  • 8 pole pairs
  • Optional gearheads, encoders and drive electronics

Order your EC-i drive online now at-

EC-i 52XL 200W Brushless Servo Motor Buy Online

Information on the EC-i 52XL 200W Brushless Servo Motor from maxon can be viewed at:

EC-i 52XL 200W Brushless Servo Motor Specification

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

See this and other Motion Control Components from Electromate featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Maxon EC-i 30 20W Motor with Integrated Electronics is available from Electromate!

Motion Control – Miniature Motors
motion control miniature integrated motor

 

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — Maxon have released the new EC-i30 20W Brushless Servo Motor with Integrated Electronics. With an integrated 4 Quadrant speed controller, this latest addition to the EC-i portfolio is available as a 5-wire version. Both enable and direction versions of the motor are offered.

This high torque 20Watt 30mm diameter motor is ideal in micro fluid pump (air/gas) and medical applications such as:

  • Vacuum wound therapy
  • Patient vital signs monitoring
  • Anaesthesia and gas monitoring
  • Compression therapy
  • Blood analysers
  • Peritoneal dialysis
  • Haemodialysis
  • Portable oxygen concentrators
  • Gas detection and analysis
  • Fragrance distribution
  • Surgery training systems

The EC-i30 20W Brushless Servo Motor with Integrated Electronics is available with an optional planetary gearhead, model GP32C, and can be customized specific to the needs of the application.

Features include:

  • Cost-effective
  • 20 Watt Rated
  • 24VDC winding
  • 4 Pole Pairs
  • Speed range 250 – 6060 RPM
  • Optional gearheads, encoders and drive electronics

Order your EC-I 30 20W motor with Integrated Electronics online now at-

EC-i 30 20W with Integrated Electronics Brushless Servo Motor Buy Online

Information on the EC-i 30 20W with Integrated Electronics Brushless Servo Motor from maxon can be viewed at:

EC-i 30 20W with Integrated Electronics Brushless Servo Motor Specification

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


For other Motion Control Components, Applications, and Technology from Maxon Motor go to: http://AllMotionBlogger.com
 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Maxon Launches Additional EtherCAT Motion Controllers!

Motion Control – Maxon Motor – “The EPOS4 product family is now complete.”

Motion Control etherCAT Miniature Controller

 

Maxon Logo

Fall River, MA — Motion Control Components – With the EPOS4 series, maxon is offering a reliable and extremely versatile platform of high-performance motion controllers. It addresses the needs of system integrators and fulfills the requirements of a variety of applications, such as industrial automation, apparatus engineering, and robotics. The platform is now being complemented with two new Compact EtherCAT models.

The highly successful EPOS4 positioning controllers made by maxon motor are scalable and consistently support a uniform set of functionalities and connection options. Modularity with different designs (module, compact, or encased version) ensures optimal integration in a wide variety of applications. The controllers offer excellent dynamic properties, control quality, and power density while requiring only minimal installation space. In addition, their automatic controller setting makes them ideally suited for easy control of both brushless (BLDC) and brushed DC motors.

Now with dual loop control

Maxon is expanding its family of EPOS4 products with two new EtherCAT Compact controllers (24/1.5 and 50/5). At the same time, maxon is upgrading the capabilities of the entire platform by enabling dual loop control. Dual loop control simultaneously controls motor and load feedback for optimum performance within the system. The EPOS Studio software ensures the minimum possible set-up times with its automatic Regulation Tuning feature.

Condition monitoring for added value

However, the EPOS4 has many additional capabilities: for example, the controller continuously delivers hundreds of data points about the drive system for online condition monitoring and transmits this data to a higher-level system via CANopen or EtherCAT in real time. This supports complex predictive maintenance systems that anticipate impending failures to avoid costly repairs, resulting in higher productivity and lower cost.

For more information about our EPOS controllers, please visit epos.maxonmotor.com

Contact maxon for more details info@maxonmotorusa.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

For other Motion Control Components, Applications, and Technology from Maxon visit The ORIGIONAL: http://MotionControlBuyersGuide.com

 

Maxon Logo
Visit our Website
Order Our Catalog

Maxon Handbook Banner

Motion Control – Maxon’s HPSC (High Performance Sensorless Control!)

Motion Control – Maxon’s HPSC (High Performance Sensorless Control!)

Motion Control – Maxon motor introduces HPSC sensorless speed and torque with compact wiring and slim design

motion control miniature motor controller

Motion Control - Maxon Logo

Fall River, MA — Motion Control Components – Miniature – Maxon Motor has developed a sensorless speed and torque control solution called “HPSC”. This new technology allows FOC (field oriented control) for brushless motors without sensors from full stop to full speed under load. This HPSC uses a sophisticated signal injection algorithm which precisely determines the rotor position for a smooth startup each and every time.

  • Low noise, No vibrations
  • Maximum power efficiency
  • Robust and reliable

This system contains an HPSC module 24/5 – dimension and power range can be adapted if required. The firmware of the module may be customized for every drive system. HPSC is a custom made solution ideal for surgical systems, fluid delivery systems, rehabilitation & prosthetics. Contact maxon for more details info@maxonmotorusa.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon Logo
Visit our Website
Order Our Catalog

Smaller in Diameter than a US Quarter, This Miniature Voice Coil Motor Has a High Force-to-Size Ratio!

Motion Control – Miniature Voice Coil Motor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Smaller in diameter than a United States quarter, the miniature Linear Voice Coil Motor, LVCM-019-016-02, from Moticont has a high force-to-size ratio! It produces 8.9 oz. (2.5 N) of continuous force and 28.0 oz. (7.8 N) of peak force in a compact 0.750 in. (19.1 mm) diameter x 0.94 in. (23.8 mm) long envelope (at mid stroke). This high speed motor has zero cogging and features high accuracy, and high repeatability to less than1 μm (0.00004 in.) when operated in a closed loop as a DC servo motor. This clean, quiet, efficient, low inertia, high acceleration, miniature voice coil motor is ideal for applications such as: Pick-and-place, testing, laser steering, laser speckle reduction, mirror positioning, scanning, oscillation, switching, and hand held medical, dental, or industrial applications.

The miniature LVCM-019-016-02 linear voice coil motor has a stroke length of 0.25 in (6.4 mm). and is easily added to new or existing applications using the precision drilled and tapped 8-32 UNC-2B mounting holes. Other smaller and larger models as well as custom designs are available. The LVCM-019-016-02 linear voice coil motor can be order as a complete plug-and-play system including an encoder and controller.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.com or visit the website at http://www.moticont.com

See this and other Motion Control Components from Moticont featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

 

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – ENX 16 RIO Encoder from Maxon Motor!

Motion Control – Maxon Motor presents a top-of-the-range high-resolution encoder. The ENX 16 RIO offers an impressive resolution of up to 65,536 counts per turn in a compact and rugged housing.

Motion Control - Maxon motion ENX 16RIO Motion Control Encoder

 

Maxon Logo

Fall River, MA –Motion Control Components – Miniature Encoders – Requirements on encoders are becoming more and more demanding. This applies particularly to positioning applications with precision constant-speed control, where increasingly compact housings need to accommodate an ever greater number of electrical contacts. maxon motor solves this problem with its new ENX 16 RIO optical encoder. It is a mere 16 millimeters in size and offers a resolution of up to 65,536 counts per turn, making it ideal for the precise position and velocity control of DC motors

The new maxon ENX 16 RIO encoder (Reflective, Interpolated, Optical) fulfills all the requirements for a high-resolution optical encoder in a compact design. The resolution can be configured at the factory or online. With 16 millimeters outer diameter and 7 millimeters overall length, the housing is mechanically robust and protected from dust due to its injection-molded construction. The operating temperature range is -40 °C to +100 °C.

Maxon motion ENX 16RIO Motion Control Encoder on Motor

Easily configured online for combinations with maxon motors

The encoder can be combined and configured with matching drives online. It fits the new brushless EC-i 30 motors and the brushed DCX motors (diameters of 16 millimeters and up). The counts per turn and the electrical interface of the ENX 16 RIO encoder are also configurable online. All combination options and detailed product information is available in the maxon online shop: shop.maxonmotorusa.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon Logo
Visit our Website
Order Our Catalog