Category Archives: Motors – Direct Drive

Motion Control – New from MAXON, Miniaturized Controller the EPOS4 Micro 24/5 CAN!

Motion Control – Miniaturized Controller

motion control - micro controller

 


motion control - maxon logo

 

Taunton, MA — Motion Control Products – Maxon is launching a new, miniaturized controller with a size of only 32 mm x 22 mm as part of its successful line of positioning controllers. The attractive price-performance ratio, with a functionality that’s virtually identical to the larger units, addresses cost-sensitive single- and multi-axis applications.

The functionality, operation, software, and accessories of the new controller are derived almost directly from the existing products in the EPOS4 range.

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Motion Control – Miniature Voice Coil Motor

motion control - linear actuator


motion control - moticont
Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long. This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Also called an Electric Cylinder, this linear actuator has a threaded 2-56 UNC-2A shaft for a backlash free connection. The housing and coil each have 2 2-56-UNC-2B threaded mounting holes on 0.25 in (6.35 mm) centers. The built in centered shaft facilitates the commissioning of the motor for easy integration into current and future applications.

This clean, quiet, efficient, low inertia, high reliability actuator is ideal for: Heptic feedback and pipetting in medical devices, switch activation, testing, sorting, assembly equipment, work holding and clamping, scanners and laser beam steering and filtering, laser, machining and drilling, optical focusing, and dynamic vibration absorption. Moticont also offers DC and servo motor drivers.

Is there a need for a higher force or longer stroke? There are currently 7 series of Moticont GVCM motors based on diameter of this motor.

To find the right motor for you application go to: http://moticont.com/linear-motor-with-bearing.htm

 

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticont

 

 

Direct Drive Linear Motor Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Linear Actuator Gives Higher Throughput! 

motion control Voice coil motor with temperature sensor

 


motion control - moticontThe SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N).  This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft.  Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long.  Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy. Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration.  Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticont

All of Moticont Components

Moticont Videos

Motion Control – Voice Coil Motor with Internal Shaft and Bearing Features 63.9 lbs of Continuous Force!

Motion Control – Voice Coil Motor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont has added a new high force voice coil motor to its GVCM family of voice coil motors with an internal shaft and bearing. The new GVCM-095-089-03 Linear Voice Coil Motor (also known as linear DC motor) features a continuous force of 63.9 lbs (284.1 N) and 202.0 lbs (898.4 N) of peak force at a 10% duty cycle. Guided by a long-life plain bearing that can allow side loads up to 3 lb (13.5 N), the precision ground 0.236 inch (6.0 mm) diameter shaft with an internal thread has a stroke length of 0.5 in. (12.7 mm). The quiet, efficient, smooth, cog-free motion of this low inertia brushless GVCM-095-089-03 Linear Voice Coil Motor is ideal for: Clamping, work holding, sorting equipment, assembly, medical devices, antenna positioning, testing, slide actuators, shutters, doors, valve actuation, wafer handling, and optical focusing.

This new voice coil actuator features: High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, and a high force to size in either direction, in a housing measuring just 3.75 in. (95.3 mm) dia. x 3.5 in. (88.9 mm) long. The housing and coil ends of the motor have threaded mounting holes in the housing and coil ends for easy integration into new and existing applications.

Is there a need for a smaller or larger diameter motor, one with longer stroke, or more force? There are currently 7 series of Moticont’s expanding line of GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application, please visit: http://www.moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


For other Motion Control Components, Applications, and Technology from Moticont go to: http://MotionControlBuyersGuide.com
 

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – Protection Against Contamination: Breathing Clean Air!

Motion Control – Protection Suit Motor!
Maxon DC motors are used in the blower components of high-quality protection suits.

motion control - Maxon Motor

 


motion control - maxonMaxon was selected for the compact and lightweight DC motor design, ironless winding, strong magnet and producing very little vibration and noise output. Most importantly, a brushless DC motor was mandatory as a brushed motor may cause sparks that would ignite within the suit. When designing the suit, special attention was given to the placement of the blower unit sewn inside the suit, to avoid the need for heavy straps or air supply hoses. A Li-Ion battery provides more than four hours of operation of air supply with a flow up to 600 liters per minute.Taunton, MA -Motion Control – Protection suits containing an air blower element that fills the entire suit with clean air, have been used by health professionals when faced with contaminated environments. The COVID-19 pandemic is an unprecedented situation where these type of suits have been utilized. Maxon DC brushless motors are found inside these specialized suits. The DC motor is efficient, high-speed and robust.

 

For more information please contact maxon motor Australia tel. +61 2 9457 7477.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.



See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – COVID-19 – Linear Actuators for Medical Ventilators and Respirators Available in OEM Quantities!

Motion Control – COVID-19 – Linear Actuators for Ventilators 

motion control ventilator actuators

 

MotiCont-Logo

Van Nuys, CA – Motion Control – During the COVID-19 pandemic engineers and designers of medical devices are working 24/7 to design and manufacture critically needed life support and testing equipment. Moticont has a proud history of supplying precise, reliable voice coil linear actuators used in medical ventilators and respirators, and will be especially quick to respond to the need for actuators in OEM quantities as well as requests for custom prototypes.

Moticont manufactures three lines of linear voice coil actuators that are ideally suited for medical ventilators, respirators, and dispensing of reagents. Each of the pictured actuators are clean reliable voice coil actuators with a guided shaft that is designed to couple directly to the load and therefore has zero backlash. The three lines are the: GVCM series, SDLM series, and DDLM series.

Each of these lines of low cost, clean, brushless, compact actuators features attributes critical to Life Support equipment: Very low Mean-Time-Between-Failures (MTBF), extremely efficient, low hysteresis for greater repeatability, highly controllable force, stroke length, and speed, low noise, maintenance free, and can be easily integrated into new or existing applications. The GVCM series and DDLM series of Linear Voice Coil Actuators can be used with a position sensor and the SDLM series of Linear Voice Coil Actuators has an integral encoder. The DDLM and SDLM actuators are fully enclosed actuators.

For assistance in selecting the best linear actuator for a specific application such as: Life support in ventilators or respirators, reagent dispensing, sampling, sorting, or assembly, contact the Moticont sales team.

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control Components – Miniature Voice Coil Motor Features High Force to Size Ratio!

Moticont motion control components - Miniature Voice Coil Motor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – The miniature Linear Voice Coil Motor, LVCM-022-013-01, from Moticont features a high force-to-weight ratio of 14.5 oz. (4.0 N) continuous force and 45.7 oz. (12.7 N) peak force in a compact 0.875 in. (22.2 mm) diameter x 0.50 in. (12.7 mm) long package. This clean, quiet, efficient, low inertia, high acceleration, high speed motor has zero cogging and features high accuracy, and high repeatability to less than1 μm (0.00004 in.) when operated in a closed loop as a DC servo motor. This miniature voice coil motor is ideal for applications such as: Pick-and-place, testing, laser steering, mirror positioning, scanning, oscillation, switching, and hand held medical, dental, or industrial applications.

The miniature LVCM-022-013-01 linear voice coil motor has a stroke length of 0.25 in (6.4 mm). and is easily added to new or existing applications using the precision drilled and tapped 4-40 UNC-2B mounting holes. Other smaller and larger models as well as custom designs are available. The LVCM-022-013-01 linear voice coil motor can be order as a complete plug-and-play system including an encoder and controller.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – Direct Drive Linear Motors with Integrated Encoders

Direct Drive Linear Motors with Integrated Encoders Offer High Resolution, Speed, No Backlash, and Zero Cogging!

MOtiCOnt Direct Drive SDLM Series Linear Motors

MotiCont-Logo

Van Nuys, CA – Motion Control – New, patent-pending, SDLM-051 direct drive linear motors with built-in en-coder from MOtiCOnt eliminate backlash and provide users with high acceleration, high speed, high resolution, and long life. Available in several off-the-shelf models, these direct drive linear motors feature resolutions of 5.2 µm (0.000206 in.), 1.25 µm (0.000049 in), and sub micron resolution. Compact, only 2 in. (50.8 mm) in diameter and 3.75 in (95.3 mm) long, and with the linear optical quadrature encoder inside directly connected to the shaft for the great-est possible accuracy, these motors can be easily integrated into new and existing motion control applications using threaded features on the front and rear faces of the motor, as well as each end of the shaft.

The new Motion Control SDLM-051 direct drive motors have a 1 in. (25.4 mm) stroke with a continuous force of 5.0 lbs (22.2 N) and a peak force of 15.8 lbs (70.2 N). Non-commutated, motors have zero-cogging, and the light weigh of the shaft allows for high acceleration/deceleration for higher thru-put, and direct coupling to the load increases accuracy and resolution. All  SDLM-051 linear motors are available with a spring to retract the shaft to a home position in the event of a sudden shutdown, and they can be quickly customized to meet specific automation needs.

Typical SDLM-051 direct drive motor applications include: Automated assembly, component insertion, fluid dispensing, pick-and-place, robotics, wafer handling, sorting, valve and flow control, labeling, tension control, and laser machining in the processing, manufacturing, medical, inspection, metrology and other industries.

About MOtiCOnt – MOtiCOnt is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

MOtiCOnt is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For Additional Information About These Direct Drive Linear Motors from MOtiCOnt – Click Here!

For additional information contact MOtiCOnt, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: , Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

 

MotiCont-Logo
Visit our Website
Other Products
Videos