Category Archives: Motors – Stepper

Motion Control – Need help coupling two parallel shafts? We offer a full family of Power-On Clutches!

Motion Control – Power-On Clutches!

motion control - clutches

motion control - electromate logo

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — Power-on Clutches are used to couple two parallel shafts. The armature hub assembly is mounted to the same shaft as the rotor assembly. The armature hub accommodates a pulley, gear, sprocket, etc., to transmit torque to the second shaft. The field assembly is mounted on the shaft and retained by a loose-fitting pin or bracket through the anti-rotation tab.

Motion Control – The Mars helicopter continues to makes history – with maxon’s precision motors!

Motion Control – Mars helicopter has maxon’s motors!

Space fans are thrilled: NASA’s Ingenuity helicopter has successfully completed its pioneering flight on Mars. This is the first time in the history of powered, unmanned spaceflight that a device has flown in a controlled manner on another planet.

motion control - mars helicopter


motion control - maxonTaunton, MA — Motion Control Products – A short flight for “Ingenuity,” but a big success for unmanned space flight. NASA’s Mars helicopter flew over the surface of the Red Planet for about 40 seconds on Monday, April 19th and landed back on four legs. From NASA’s perspective, this is a historic event similar to the Wright brothers’ first controlled flight in 1903.

With the Mars helicopter, the concept of powered, unmanned, and autonomous flights on foreign planets is being tested. This is comparable to the first Mars rover “Sojourner”, which paved the way for scientific follow-up missions such as “Curiosity” and currently “Perseverance”. “Ingenuity” is about to complete several flights over a period of 30 days, each lasting up to 90 seconds and reaching a maximum altitude of five meters.

Motion Control – Low Profile XYZ Force Positioning System from H2W Technologies!

Motion Control – Low Profile XYZ Positioning Stage

motion control - xyz stage
motion control- h2w
Santa Clarita, CA —– Motion Control – This compact closed loop system was designed to satisfy the customers dual feedback requirements. This allows for simultaneous position and force monitoring which can adjust accordingly in three axis of motion (XYZ). It was designed to operate in an inverted orientation. This low profile XYZ-Force positioning stage design is comprised of a SRS-002-003/002-003-01-XY single rail positioning stage (horizontal XY-axis) with a mounted VMS06-008-LB-01 voice coil positioning stage (vertical Z-axis).

Motion Control ServoStep Integrated Stepper Motor in size NEMA 17, torque up to 0.8 Nm!

Motion Control Integrated Step Motors

motion control integrated stepper motor

Vaughan, Ontario, Canada — Motion Control Components — JVL Industri Elektronik A/S, one of the world leaders in the field of integrated servo – and stepper motors introduces a new compact and slim stepper motor. The new ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42×42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. This new motor family is based on the latest microprocessor and cooling technology and an advancement compared to previous designs.

motion control - electromate

All the necessary electronics in a stepper system are integrated in the motor itself and are similar to the concept used by other JVL motors, making it very easy to use in all kind of motion control stepper or servomotor applications. The motor contains everything needed to solve a modern control task, either as a stand-alone with own easy programmable motion controller or controlled from an external PLC or PC. 8 I/O points can be individually configured as digital input, digital output or analogue input. Modbus RTU or CANopen provide easy connections to a PLC or HMI.

Motion Control – New from MAXON, Miniaturized Controller the EPOS4 Micro 24/5 CAN!

Motion Control – Miniaturized Controller

motion control - micro controller

 


motion control - maxon logo

 

Taunton, MA — Motion Control Products – Maxon is launching a new, miniaturized controller with a size of only 32 mm x 22 mm as part of its successful line of positioning controllers. The attractive price-performance ratio, with a functionality that’s virtually identical to the larger units, addresses cost-sensitive single- and multi-axis applications.

The functionality, operation, software, and accessories of the new controller are derived almost directly from the existing products in the EPOS4 range.

Motion Control Integrated Stepper Motor with EtherNet Available from Servo2Go!

Motion Control – Integrated Stepper Motor with EtherNet

motion contro - integrated stepper motor

Greenville, DE — Servo2Go is pleased to offer integrated drive+motors from Applied Motion Products to our line of Ethernet and EtherNet/IP motion control products

The new STM23 models fuse a high performance motion controller with 100 MBit Ethernet communications to a high torque NEMA23 step motor. Connecting to an Allen-Bradley ControlLogix, CompactLogix or MicroLogix PLC? EtherNet/IP is also available.

motion control - components

The STM23Q-2Ex provides 125 ounce inches of torque, while the longer STM23Q-3Ex produces 210 ounce inches. Both models are available with an optional 4000 count/rev optical encoder, safely housed inside, that can detect and prevent motor stalls using Applied Motion’s proprietary stall prevention algorithm.

Motion Control – Maxon’s trade show experience goes virtual!

Motion Control – Virtual Trade Show!

motion control - trade show

 

motion control - maxon logo

 

 

Taunton, MA — Motion Control Products – This year, the COVID-19 pandemic has led to the cancellation of nearly all trade shows. Despite this, maxon is offering a digital trade show experience to all of its customers and anyone who’s interested in learning about the latest in drive technology. Visitors to maxon’s virtual booth will discover the benefits of our latest products such as the MiniMACS6 master controller, learn about high torque brushless DC motors as well as flat motors for robotics, and get to know the Mars rover. Visit virtualbooth.maxongroup.com and contact us to get your ideas moving.

Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!

Motion Control – ATTENTION – Ventilator Manufacturers!

motion control - ventilator components

 

motion control - Electromate

 

 

Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond.

Electromate is a mechanical ventilator component supplier and works with a number of manufacturing partners that supply crucial components needed to build more ventilators.

These include:

  • HMI’s
  • Linear guides
  • Linear actuators
  • Screw assemblies
  • Compact gearboxes
  • High efficiency servo & stepper motors
  • Programmable motion controllers and drives

Our team of motion design experts are located all across Canada and are available right now to help you with any electro-mechanical ventilator design. If you are working on a ventilator involving rotary, linear, or any other motion, we will provide immediate help with electro-mechanical engineering and component sourcing. Contact us today.

We are already working with ventilator and respirator companies and encourage any other businesses working on COVID-19 solutions to reach out to us.

All inquiries regarding ventilator components or any other equipment to help battle COVID-19 are given utmost priority. We can help to optimize your design quickly and provide fast turnaround proposals as requested. Additionally, we are able to meet high production demands in a very short time by utlilizing ‘Medical Fast Track Programs’ -info.us@maxongroup.com from maxon, and other vendors.

Many of the products we sell to the medical technology sector have ISO 13485 certification. This certification confirms that these products adhere to the fundamental requirements of medical technology and that all processes and procedures are documented, thereby guaranteeing traceability.

In addition to helping with the design and acquisition of critical components used in ventilators and respirators, we also want to make you aware of initiatives that you may be able to utilize. Please read below to learn more about these programs and how you can assist with the COVID-19 cause.

CODE LIFE VENTILATOR CHALLANGE

The Montreal General Hospital Foundation, in collaboration with the Research Institute of the McGill University Health Centre (RI-MUHC), is launching a global innovation challenge, backed by a prize of $200,000 CAD. They are calling for teams to design a simple, low-cost, easy-to-manufacture and easy-to-maintain ventilator which could be deployed anywhere needed to save lives.

motion control - medical application

To learn more, please visit https://www.mghfoundation.com/en/news/code-life-ventilator-challenge/

 

 

MIT EMERGENCY VENTILATOR (E-VENT) PROJECT COPY

MIT has launched an emergency research project with a team of Engineers and American clinicians to address the question:

Is it possible to safely ventilate a COVID-19 patient by automatically actuating a manual resuscitator?

Their process in approaching this question is to first identify the minimum requirements for a low-cost ventilator, based on the collective wisdom of many clinicians, design against these requirements, conduct immediate testing, report the results, iterate and facilitate discussion.

motion control - medical applications

To learn more, please visit https://e-vent.mit.edu/

 

 

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate logo

Motion Control Application – Driver assist systems can help save lives by alerting driver of potential danger!

Motion Control – Application – Driver Assist Systems Help Save Lives!

 


motion control - maxonMaxon A-max 16 brushed DC motor – This drive with a diameter of 16 millimeters (precious metal brushes, 2 Watt) was developed for use with an eccentric weight and a specified bearing.
motion control - application - brushed motors

Fall River, MA — The majority of traffic accidents are caused by human error. In the future, computer-controlled cars will significantly reduce the number of such accidents. Driver assist systems, such as adaptive cruise control (ACC), brake assist systems, or lane departure warning systems (LDW), can save lives. Lane departure warning systems warn the driver if the vehicle is drifting out of its lane. The LDW determines the vehicle’s position in the lane with the use of various optical sensor systems and computers. If the car is in danger of drifting out of the lane, the system activates an electric motor in the steering wheel that causes the wheel to vibrate, warning the driver.

A luxury car manufacturer has engaged maxon to supply the motors for this application. The base DC brushed motor is maxon’s A-max 16 (precious metal brushes, 2 W), modified for the application with an eccentric weight and a specified bearing. In order to prevent the other vehicle systems from being affected by the electromagnetic fields of the motor, it has been equipped with special EMI suppression for automotive applications. The small drive system must meet specific requirements: It needs to be low-noise, dynamic, feature high power density, and fit in a narrow space – requirements that maxon’s small A-max 16 easily masters..

Contact maxon for more details info@maxonmotorusa.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – 20 mm Linear Stepper Motor by Nippon Pulse are available from Electromate!

Motion Control  – 20 mm Linear Stepper Motor!

motion control linear stepper motor

Vaughan, Ontario, Canada — Motion Control Components — Nippon Pulse is excited to introduce its smallest linear stepper motor yet, the PFL20 Linearstep. The PFL20 is a highly efficient, high thrust tin-can linear actuator with a 20mm diameter and a bipolar winding.

PFL20 is RoHS-compliant, has a 30/60mm effective stroke, and can reach 6 N of force at 200 pps. With 24 steps per revolution, the lead screw has a 1.2mm thread pitch; the PFL20 also reaches 5V rated voltage, resistance of 33 Ohms/phase and inductance of 12mH/phase. The datasheet with additional specifications can be found here.

motion control - Electromate

The simple structure of Linearstep motors – just a threaded rotor hub and lead screw – helps to save space and reduce costs, due to fewer components needed compared to systems that convert rotary motion to linear. Linearstep motors are also easy to control, and can be ordered with unipolar or bipolar windings and a variety of usable voltages. In addition to the 20mm motor size, this motor is also available in 25mm (captive or non-captive option) and 35mm diameter sizes.

Nippon Pulse’s tin-can linear actuators, including the Linearstep, are also available for customization; contact an applications engineer to learn more about our customization capabilities.

Information on the PFL20 from Nippon Pulse can be viewed at:

https://www.electromate.com/assets/catalog-library/pdfs/nippon-pulse/Nippon_Pulse_pfl20_specsheet.pdf

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate logo

Motion Control – New VLM Servo Motors for value conscious applications!

motion control Kollmorgen Servo Motor

 

Servo2Go-Logo

 

 

Greenville, DE —-Motion Control Components – Kollmorgen has launched the VLM servo motor series to fill the gap between stepper and high-performance servo motors. The new VLM series synchronous servo motors offer OEMs, machine builders and end-users, an excellent price-performance proposition in the torque range of 0.5 to 4.5 Nm continuous and 16 Nm peak, with speeds of up to 6000 rpm. They also provide highly flexible configuration, proven quality and high reliability. Hence, they are a very useful solution for many applications where stepper or asynchronous motors are pushed to their limits but the expense and unused dynamics of high performance servo motors is not desirable.

The many standard design and configuration options built into the range allow engineers an optimal solution from the outset, to tailor their applications and machine requirements. Thus, installation time and cost is minimized and the price-performance ratio is further improved. The VLM series motors are available with standard frame sizes of 60 mm and 90-mm or NEMA 23 and 34 in each of the six most popular motor sizes and with a choice of twelve standard windings. The extensive possibilities for shaft and mounting facilitate seamless integration into virtually any system.

Feedback options include Digital Resolver (SFD), resolver, encoder and Hall sensors. VLM motors achieve continuous torque up to 4.5 Nm and peak torque to 16 Nm and can be used in power systems with 230 VAC. And of course, the new motors meet the ROHS Directives for CE and UL certification.

Information on the Kollmorgen VLM Brushless Servo Motors available from Servo2Go.com can be viewed at: https://www.servo2go.com/products/servo-motors-drives/servo-motors/ http://www.servo2go.com/product.php?ID=101027&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Integrated Motors Feature Fast and Easy Setup for Rockwell Automation/Allen-Bradley PLC’s!

 

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — After the successful introduction of the complete range of ServoStep integrated motors JVL is now releasing Add-On-Instructions for fast and easy setup and programming in Rockwell Automation’s Studio 5000 software.

All-in-one unit: Motor, Absolute multiturn encoder, Drive, Controller, PLC and Ethernet Switch as well as TÜV-approved STO option. The integrated design with the controller in the motor minimizes the size of the control cabinet. With less components in the cabinet, the cooling requirements will be lower, reducing both system cost and running costs.

JVL´s ServoStep motors offer state-of-the-art performance that in some applications can rival servo motors at a lower cost. The high torque at low speeds make compact solutions without gear possible. The ServoStep family offers up to double power in same size compared to similar motors, due to higher current/voltage and advanced regulation.

JVL’s closed-loop ServoStep technology eliminates loss of steps and never stalls. The technology causes a paradigm shift that changes your perception of what you can do with a stepper motor. Ultra-high torque enables direct drive without gearing. The motor series also has current control, which lowers power consumption and allows 100% duty cycle without overheating. The ultra-high step resolution of 409,600 step/rev decreases acoustic noise and results in a smooth-running motor.

The wide speed range from 0 to 3000 rpm can be adjusted in increments of 0.01 rpm. Due to automatic tuning, programming is fast and easy.

The motors have 8 programmable inputs/outputs: each can be set up as digital input, digital output or analog input. Motors are equipped with EtherNet/IP interface and as option you can choose STO (Safe Torque Off) versions.

The motors are perfect for multi-axis applications and format adjustments where high positioning speed is required. Due to ultra-high torque, no gear is needed.

For end-of-line packaging and food and beverage applications enclosure class IP65 can be delivered.

To fulfil the demands for diagnostics and easy maintenance in factories of the future the motors are designed for IIoT and are Industry 4.0 ready.

The motors include a 2-port Ethernet switch to reduce wiring in daisy-chain configuration (DLR). Several LEDs enable technicians and operators to get a quick status overview.

To save time, Add-On-Instructions are available for Studio 5000. It makes commissioning fast and easy and the motors can be set up in 5 minutes or less.

Industrial Ethernet:

The motors have the ability to be upgraded with other protocols or newer versions of the same protocol at any time. Because of the upgradeability, the JVL industrial Ethernet interface is also ‘future proof’ as newer versions of the protocols will always fit into the design. The user can switch between Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS.

Information on the Integrated Servo & Stepper Motors from JVL can be found at – https://www.electromate.com/jvl-industri-elektronik.html

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-time delivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – IP65 Integrated Stepper Motors Available from Servo2Go!

motion control Servo2Go-Logo

Greenville, DE —-Motion Control – Applied Motion’s SWM integrated steppers are IP65 rated drive+motor units, fusing step motor and drive components into a single splashproof and dustproof device. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions.

The motion control SWM24 integrated steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

All SWM24 integrated steppers are RoHS and CE compliant.

Features include:

  • Torque to 340 oz-in
  • Rated IP65 for wet and dusty environments
  • M12 connectors
  • Anti-resonance
  • Torque ripple smoothing
  • Microstep emulation
  • NEMA 24 frame size
  • Stored programming option for stand-alone operation
  • Step direction, velocity and streaming command control modes
  • RS-232, Ethernet and EtherNet/IP Communication options
  • Modbus/RTU for easy communication with PLC or HMI
  • Built-in incremental encoder

CLICK HERE Here for information on these IP65 Integrated Steppers

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.comor visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Closed-Loop Integrated Stepper Motors feature magnetic or absolute encoder feedback Available from Electromate!

Electromate offers JVL Closed Loop Integrated Steppers

Motion Control - Electromate-Logo

 

 

Vaughan, Ontario, Canada — Motion Control Components — JVL presents a new innovative closed-loop stepper motor technology for its NEMA 23 & 34 integrated stepper motor range from 0,1 to 12 Nm. JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control.

New Innovative Technology

JVL closed-loop integrated stepper motors, QuickStep®, provide higher torque, faster acceleration, torque control, stall free operation and quieter movements than traditional step motor systems. QuickStep do this with greater efficiency and less motor heating because motor phase current are regulated up and down according to need. Performance of JVL closed-loop steppers are similar to servo motors, but with higher torque and often without need of gearbox, resulting in a more inexpensive solution. Design safety factors have always been high for stepper motors to ensure stall-free operation – now with QuickStep closed-loop control design can be very close to the limit resulting in even lower costs. QuickStep is a true closed-loop control system that compensates step angle errors during a movement and correct errors within a full step. If load becomes too high speed is lowered and position errors will always stay within two full-steps. Smart digital design and very high update rates (36 MHz) means there is no need of any manual adjustment or setup. It works like a perfect stepper motor benefitting from the servo motor technology.

Advantages compared to open loop stepper motors

  • Position feedback and control
  • Fast and easy commissioning. No tuning needed
  • No stalling. No step losses at all
  • Torque control
  • Much faster positioning and more cycles per second
  • Increased efficiency and thereby much lower temperature
  • Shorter settling time
  • Controls higher inertias than open loop steppers
  • Higher load tolerance
  • More quiet operation (lower acoustic noise)
  • Longer lifetime due to lower temperature
  • Correct positioning without overshoot and oscillation

Advantages compared to servo motors

  • Very high Torque at low speed. Often 3-4 times higher in same motor flange size
  • Very high ratio-of-inertia, often up to 40:1
  • Faster commissioning. No tuning needed
  • Lower price. Same price as open loop steppers
  • Totally stiff at standstill. Full holding torque
  • Direct drive without gearbox (better and more precise torque control)
  • Correct positioning without overshoot
  • No oscillation
  • Very short settling time

Benefit in these application from closed-loop stepper motors

  • Multiple axis applications (RS485, CANopen)
  • Industrial Ethernet: Profinet, EtherNet/IP, EtherCAT, Powerlink, Modbus TCP, SERCOS III
  • Magnetic or Absolute Encoder Feedback
  • Positioning tasks with load changes
  • Applications that require quiet operation, short settling times and precision positioning

Applications include

  • Winding applications
  • Belt drives (start/stop, positioning)
  • Dosing pumps and filler systems
  • Semi-conductor mounting
  • Wafer production
  • Textile machines and industrial sewing machines
  • Robotics
  • Testing and inspection systems

More information on the JVL’s Closed-Loop Integrated Stepper Motors can be viewed at the links below-

NEMA 23 models

NEMA 34 models

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Integrated IP65 Stepper Motors Available from Servo2Go!

Motion Control Components - Integrated IP65-Stepper Motor available from Servo2Go

Servo2Go-Logo

Greenville, DE —- Motion Control Components – SWM integrated steppers from Applied Motion Products Inc. are IP65 rated drive+motor units, fusing step motor and drive components into a single splash proof and dustproof device. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions.

The SWM24 integrated steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

All SWM24 integrated steppers are RoHS and CE compliant. Features include:

  • Rated IP65 for wet and dusty environments
  • M12 connectors
  • Anti-resonance
  • Torque ripple smoothing
  • Microstep emulation
  • NEMA 24 frame size
  • Stored programming option for stand-alone operation
  • Step direction, velocity and streaming command control modes
  • RS-232, Ethernet and EtherNet/IP Communication options
  • Modbus/RTU for easy communication with PLC or HMI
  • Built-in incremental encoder

For more information on the SWM Integrated Stepper Motors from Applied Motion Products Inc – CLICK HERE

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Low-cost Tin-Can Stepper Motors from Nippon Pulse feature high torque and compact size!

Motion Control Low Cost Tin Can Steppers available from Servo2Go

Servo2Go-Logo

Greenville, DE —-Motion Control Components – The PF/PFC series tin-can stepping motors are conventional magnet-driven rotary stepper motors with a permanent magnet in their rotor core. Rotating in proportion to the number of pulses sent to the motor, the stepper motor is frequency synchronized and can change speed depending on the frequency of the pulse signal.

Because of its high torque output and low profile construction, applications for tin-can stepper motors include, but are not limited to, printing, packaging, and medical devices.

PF/PFC series tin-can stepping motors are also available with optional gearheads offering increased torque in a small package. Nippon Pulse geared tin-can stepping motors can achieve up to a 2500mN·m maximum torque.

Geared motors from Nippon Pulse are well-suited for fluid dispensing, pumps, valves and a host of other applications that require high torque and smoother motion.

More information on Low-cost Tin-Can Stepper Motors from Nippon Pulse feature high torque and compact size, available from Servo2Go.com can be viewed at: https://www.servo2go.com/search.php?search=Tin-Can%20Stepper%20Motors&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Integrated StepSERVO™ Motors Are Available from Electromate!

Automation – Integrated Step Motors fAutomation - Integrated Stepper Motors Available from Electromateuse step motor plus drive and control components into a single device. Integrated steppers offer a space-saving design that reduces wiring and saves on cost over separate motor and drive components.

Motion Control - Electromate-Logo

Woodbridge, Ontario, Canada — Automation motion control – Integrated Stepper Motors – Ideally suited for applications such as packaging and labeling, automated test and measurement, automated assembly and life sciences, StepSERVO™ motors from Applied Motion Products provide the next evolution integrated step motor technology. Starting with a proven integrated motor design, we add a high-resolution incremental encoder and closed-loop servo firmware to create a motor that offers the best step motor performance available today. StepSERVO™ motors offer the same high-torque-at-low-speed and excellent holding torque characteristics of open loop stepping motors with the advantages of true closed-loop control. These advantages include the ability to create peak torques from the motor up to 50% higher than the normal torque range of the same step motor running open loop. Closed-loop also means the motor only draws current when it needs it, so step motors now run cooler than ever before.

StepSERVO™ motors feature:

  • NEMA frame size 17, 23 and 24. StepSERVO motors utilize 5000 line incremental encoders (20,000 counts/rev)
  • NEMA frame size 11. StepSERVO motors utilize 1024 line incremental encoders (4,096 counts/rev)
  • Closed-loop servo control using high torque step motors
  • High acceleration for faster machine cycles and greater productivity
  • Energy efficient, cool running
  • All-in-one compact solution
  • IP65 versions for wet and dusty environments
  • Stand-alone operation (stored Q programming)
  • EtherNet/IP industrial networking option
  • CANopen fieldbus option
  • Modbus RTU option for easy PLC/HMI connection

Click on the following link to view a YouTube Video on the StepSERVO™ integrated stepper motor.StepSERVO™ integrated stepper motors

There are three types of StepSERVO™ to choose from:

SSM integrated steppers feature:

Motion Control SM Integrated Stepper Motors Available from Electromate

  • NEMA 23 frame size motors
  • Ethernet (RJ-45) port for programming
  • EtherNet/IP industrial networking standard
  • Three motor lengths (stack lengths) available to provide the highest amount of torque in the shortest motor possible

TSM integrated steppers feature:

Motion Control TSM Integrated Stepper Motors Available from Electromate

  • NEMA 11 (New!), NEMA 17 and NEMA 23 frame size motors
  • RS-232 or RS-485 port for programming and streaming commandsApplied Motion Products TSM11-1
  • Control options including CANopen fieldbus control, digital step & direction control, analog velocity mode, streaming commands and stand-alone operation using stored Q programs.
  • Three motor lengths available in each frame size to provide the highest amount of torque for each length

TXM integrated steppers feature:

Motion Control TXM Integrated Stepper Motors Available from Electromate

  • IP65 rated for wet and dusty environments
  • NEMA 24 frame size motors
  • RS-232, RS-485 or Ethernet port (M12) for programming, streaming commands and fieldbus/networking
  • Control options include CANopen fieldbus control, EtherNet/IP industrial networking, digital step & direction control, analog velocity mode, streaming commands and stand-alone operation using stored Q programs.
  • Two motor lengths available to provide both a lower torque and a higher torque option depending on application requirements

The family of Integrated Stepper Motors Available from Electromate can be viewed at:http://www.electromate.com/integrated-motors.html

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 FREE (737-8699) or e-mail Warren Osak atsales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Nema 14 Stepper Motors

cnc stepper motor/step motor/stepper motor/stepping motor

OSMTEC Logo

  • NEMA 14 Frame Size(Round Φ 36mm)
  • 0.9° Step Angle
  • High Torque – Up to 17 oz-in
  • High Step Accuracy and Resolution
  • Low Vibration and Noise
  • CE Certified and RoHS
  • Can be Customized for
    • -Winding Current
    • -Shaft Options
    • -Cables and Connectors
  • Typical Applications 14HR Stepper Motors: Inject printers, Analytical and Medical Instruments, High Speed Dome Camera, Textile Equipment, Precision Telescope Positioning Systems, Embroidery Machine and Robotics

The 14HR Stepper Motors have more precise than 14HS Stepper Motors, It was also developed primarily for users who have a restricted installation depth available and where a Stepper motors with a construction size of 28 mm Stepper Motor is too long and a construction size of 39 mm Stepper Motor is too big. And the Round Frame can meet special mounting requirements. OSM can customize the winding to perfectly match your voltage, current, and maximum operating speed. Special shaft modifications, cables and connectors are also available upon request.

Need help choosing the right Stepper Motor? Read this: Uni-polar vs Bi-polar or learn more about Stepper Motor Basics.

For:

 

 

OSM Technology Co.,Ltd

No.535, Renmin Road, Jiangbei District

Ningbo CN 315000

Tel.: 86 574 28837284

Fax: 86 574 28837285

For additional products and information go to http://osmtec.com

Motion Control – Integrated Stepper Motors with Profinet!

motion control integrated stepper motors with profinet

JVL Offers Integrated Stepper Motors with Profinet. The Industrial Ethernet, Profinet, integrates existing systems and equipment bringing the features of Ethernet to the factory floor.

JVL Logo

Birkerød, Denmark and Morrow, OH (USA) – Automation Motion Control – Recognized as a world leader in integrated motors JVL has added Profinet Industrial Ethernet capabilities to their NEMA 34 Series of integrated steppers with programmable controllers. Available in 4 torque ratings of 3,0 Nm (26.6 in.lb), 6,0 Nm (53.1 in. lb.), 9,0 Nm (79.7 in. lb.), and 12,0 Nm (106.2 in. lb.) these very compact integrated steppers (the MIS340 is just 95 mm (3.74 in. long), include all necessary electronics within the IP67 rated motor housing. the quiet, precision, powerful MIS340 Series steppers are ideal for: Industrial, medical, inspection, testing, and processing applications.

The expanded ethernet protocols of the MIS340 series of integrated steppers from JVL easily connect to Ethernet bus systems such as: EtherCAT, Ethernet I/P, Powelink, ModbusTCP, Sercos III and Profinet. Additionally they are available with bluetooth, ZigBee, WLAN, PLC, RS485, and CANbus. These high performance steppers are also available with separate SMC85 controller. Options include: Electronic gearing, 9.53 mm (0.375 in.) or 14 mm (0.551 in.) diameter shafts, absolute multi-turn encoder, and planetary gear heads.

These high performance steppers feature a very high 409,600 steps per revolution 4,096 microsteps per step) for extremely smooth and quiet operation. The integrated PLC features 8 I/Os, RS-422 and RS485 connections for encoders, and point-to-point or multi axes operations to 254 axes. The 12-80 VDC supply provides high torque (0-9 A RMS (12.6 A peak) at high speed, and the control 12 to 28 VDC can maintain position value, etc. in emergency situations.

About JVL – JVL is recognized as a world leader for its development of efficient and compact integrated motors for VAC and VDC. MAC motor series of integrated VAC servo motors (up to 4500 W and 13,5 kW peak), and the QuickStep integrated stepper motors (up to 25 Nm). Both the servo motor and stepper motor series includes the controller, PLC, encoder, AC power supply and bus system integrated into one compact unit. All industrial ethernet busses like Profinet, EtherCat, Ethernet IP, Modbus TCP, Powerlink, Sercos III etc. are available. Furthermore, traditional modules like CANopen, DeviceNet, Profibus, Nano PLC, RS232/RS485/USB, Process Control can be incorporated.

JVL with more than 25 years of motion control experience enjoys a reputation for the development of highly specialized integrated motors with industrial Ethernet and customized improvements. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications. JVL’s wide selection of quality products for motion control components include: Integrated VAC and VDC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Brakes, Gears, and HMI Modules.

For further information, please contact: JVL Industri Elektronik A/S, Bregnerodvej 127, DK-3460 Birkerød, Denmark. Tel. +45 4582 4440. E-mail: jvlnyt@jvl.dk. Web: www.jvl.dk

JVL USA • Att: Mike Fisher • National Sales Manager
8610 Morrow-Rossburg Rd • Morrow • OH 45152-9444
E-mail: mfisher@jvlusa.com • Tel.: 513/877-3134 •Tel.: 513/282-0888 (Tech Support Line) •
Fax: 513/877-2471•
For Additional Information about Mike Fisher and JVL USA – Click Here

 

USA and Canada – Reps & Distributors: – Click Here

 

All Other Countries:

Further information can be obtained from:

JVL Industri Elektronik A/S

Bregnerodvej 127, DK 3460, Birkerød, Denmark

E-mail: jvj@jvl.dk Tel.: +45 4582 4440 ; Fax.: +45 4582 5550 ;

For JVL Home Office and World Wide Directory of Reps & Distributors Click Here

JVL Logo
Visit our Website
Order Our Catalog
Request Newsletter
JVL-Trade Fairs
Twitter Link
Facebook Link

Motion Control – Dual Axis Linear Motion Stepper Motors!

H2W Technologies Dual Axis Air Bearing Stepper Stage

H2W Logo

Santa Clarita, CA — Automation Motion Control – Linear Motion — H2W Technologies’ dual axis linear motion stepper motors are ideal for open loop positioning applications requiring 2 axis of motion in a single plane. They can perform at speeds of up to 80 in/sec [2 m/sec] and strokes of up to 20 in x 30 in [0.5 m x 0.75 m]. Linear stepper motors are capable of very precise position, velocity, and acceleration control when coupled with a micro-stepping drive and indexer.

The moving assembly called the “forcer” is supported by magnetically preloaded air bearings that are imbedded in the active surface of the forcer. The bearings are designed to support the customer’s payload and to maintain the required 0.0005 in to 0.0010 in [12 to 25 micron] gap between the platen and the forcer.

The step and direction signal for each linear motion axis comes from two separate micro-stepping drives (2 or 4 phase). A 2 axis indexer is required to send step and direction signals to the drivers. For 2 phase motors, the full step is 0.010 in [250 microns] and for 4 phase motors the full step is 0.005 in [125 microns]. With micro-stepping, resolutions in the order of 0.5 to 1 micron are achievable.

The dual axis linear stepper motor is a complete 2 axis, single plane air bearing positioning system with the motor, the bearings, and the positioning system all built into one compact package. Integrating linear encoders with the stepper motor allows for a hybrid, closed loop positioning system.

Advantages:

  • Low profile and small cross section
  • High Speed
  • No servo tuning required
  • Multiple forcers on a single platen

Applications:

  • Pick and Place
  • Wire bonders
  • Parts transfer
  • Fiber optic

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail:info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube