Motion Control – Motorized Rotary Stage! Van Nuys, CA —– Motion Control – Rotary Stages – A rotary stage is a component of a motion system used to restrict an object to a single axis of rotation. The terms rotary table or rotation stage are often used interchangeably with rotary stage. Our […]
Archive for the ‘Rotary Stage’ Category
Motion Control – Motorized Rotary Stage, the AR39-AH Available from OES!
Posted by Editor on December 17th, 2022
Posted in Actuator, Actuator - Rotary, Positioning Stage, Rotary Stage, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage 
Comments Off on Motion Control – Motorized Rotary Stage, the AR39-AH Available from OES!Motion Control – Precision 30 mm Clear Aperture Vertical Rotation Stage from OES!
Posted by Editor on December 5th, 2022
Motion Control – Vertical Rotary Stage Van Nuys, CA – — Motion Control – The precision AR59-AV Motorized, 30 mm Clear Aperture Vertical Rotation Stage from Optimal Engineering Systems, Inc. (OES) features a 180:1 precision worm drive and deep grove ball bearings for a high resolution of ± 0.001O when microstepping (10 […]
Posted in Actuators - Hollow Shaft, Alignment, Components, Rotary, Rotary Actuator, Rotary Stage, Rotary Stage - Large Apreture, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature Comments Off on Motion Control – Precision 30 mm Clear Aperture Vertical Rotation Stage from OES!Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!
Posted by Editor on January 18th, 2022
Motion Control – Open Aperture XY Stages! Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and […]
Posted in Joystick, Linear Positioning Stage, Linear Stage, Positioning Stage, Robot - Components, Robots -XYZ and Theta, Rotary Stage, Rotary Stage - Large Apreture, Rotary Stage - Yaw & Tilt, Stage - Miniature, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages XY Comments Off on Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on October 11th, 2021
Motion Control – Miniature Hollow Core Rotary Stage Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced a high precision, low profile, miniature size rotary table, the AR39-AH. This high precision miniature size rotary stage is just 35 mm (1.378 in.) high and the footprint including the […]
Posted in Actuator, Actuator - Rotary, Actuators, Actuators - Hollow Shaft, Controller, Controller - Brushless, Controller - Steppers, Drives - Brushed, Drives - Servo, Joystick, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Motion Controller, Positioning Stage, Rotary, Rotary Actuator, Rotary Stage, Rotary Stage - Yaw & Tilt, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, Theta (Axis), Vertical Lift Stage, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on September 9th, 2021
Motion Control – Stepper Motor Motion Control Systems Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Posted in Actuators, Alignment Stage, Controller, Controller - Multi-Axis, Controller - Steppers, Drivers, Drivers - Step Motor, Drivers - Stepper Motor, Elevator Stage, Linear Motion Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Motion Controller, Positioning Stage, Rotary Stage, Rotary Stage - Large Apreture, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Custom, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!Motion Control – High Precision, Compact 300 mm, Hollow Core, Motorized Rotary Stage!
Posted by Editor on May 27th, 2020
Motion Control – Rotary Stage Van Nuys, CA – — Motion Control – The new AY110-300 Motorized Rotary Stage from Optimal Engineering Systems, Inc. (OES) features a large 180 mm (7.087 in.) open aperture. This precision, large open aperture (hollow core), low profile stage is just 65 mm (2.559 in.) high and it’s foot print […]
Posted in Positioning Stage, Rotary, Rotary Stage, Rotary Stage - Large Apreture, Stages, Stages - Rotary, Stages - Rotary - Clear Aperature Comments Off on Motion Control – High Precision, Compact 300 mm, Hollow Core, Motorized Rotary Stage!Motion Control – High Precision, Low Profile, Compact 100 mm Motorized Rotary Stage Available from OES!
Posted by Editor on January 22nd, 2019
Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) now offers a high precision, low profile, compact motorized rotary stage, the AY110-100-SC. This precision stage is just 1.772 in. (45 mm) high and the foot print is only 4.764 in. by 6.693 in. (121 mm by 170 mm). The stage […]
Posted in Positioning Stage, Rotary, Rotary Stage, Stages, Stages - Rotary Comments Off on Motion Control – High Precision, Low Profile, Compact 100 mm Motorized Rotary Stage Available from OES!Motion Control – XY-Theta Alignment Stage Featuring High Resolution and High Repeatability Is Available from OES!
Posted by Editor on June 27th, 2018
Van Nuys, CA – — Motion Control Components – Alignment Stage – The XYR-03-01 Alignment Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, high repeatability XY-Theta stage for such applications as: Angular glass cutting and grinding, wafer alignment, semiconductor handling, laser cutting and drilling. The linear resolution of the X and […]
Posted in Positioning Stage, Robots, Rotary Stage, Stage - Linear & Rotary Positioning, Stages, Stages - Rotary, Stages - XY Rotary, Stages - XY Theta, Stages XY Comments Off on Motion Control – XY-Theta Alignment Stage Featuring High Resolution and High Repeatability Is Available from OES!Motion Control – Hollow Core Rotary Actuators Are Available from JVL!
Posted by Editor on November 24th, 2015
Birkerød, Denmark and Morrow, OH (USA) – JVL has introduced six Hollow Core Rotary Actuators. These integrated rotary actuators are available in two table sizes, the HDCT-100 and the HDCT-130, and each with a choice of three motors. An optional sensor kit, and control modules such as: Profibus, Devicenet and Ethernet, and easy point-and-click programming […]
Posted in Rotary Stage Comments Off on Motion Control – Hollow Core Rotary Actuators Are Available from JVL!Shimpo Drives New STH Motion Control Rotary Actuator!
Posted by Editor on September 19th, 2014
Greenville, DE –— Shimpo Drives announces its new Motion Control STH servo-driven rotary actuator. The STH is a mid-performance rotary actuator that sets a new price/performance point in rotary positioning. A Motion Control Shimpo Able servo reducer is the interface between the servo motor and STH output actuator. The Able gearbox features simple mounting of […]
