Category Archives: Servo Drives

Motion Control – Panel Mount Servo Drive Offers Centralized Control & High Bandwidth & Quick Response Times!

Motion Control – Servo Drive
motion control servo drive

The AB25A100 PWM servo drive from Advanced Motion Controls is designed to drive brushless and brushed DC motors at a high switching frequency.

Servo2Go-Logo

Greenville, DE —-Motion Control Components – The drive is fully protected against overvoltage, under-voltage, over-current, over-heating and short-circuits across motor, ground and power leads. Furthermore, the drive can interface with digital controllers or be used stand-alone, and requires only a single unregulated DC power supply. Loop gain, current limit, input gain and offset can be adjusted using 14-turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes. This drive can use quadrature encoder inputs for velocity control.

Features include:

  • 20-80 VDC Input, 15 A Cont. (25 Peak) Output
  • Built-in hardware protection – Over Current, Over Voltage, Under Voltage, Over Temperature, Short Circuit
  • DIP Switches and Potentiometers for loop tuning, current limit adjustments and drive configuration
  • Standard models support both brushless and brushed motor types
  • Velocity feedback via incremental encoder, Hall Sensors, or tachometer
  • Optical isolation between high and low power signals standard on certain models
  • Current, Velocity, and Fault Monitor analog output signals
  • Status LEDs for power and drive status
  • Four quadrant regenerative operation

CLICK HERE for more information on the AB25A100 Servo Drive from Advanced Motion Controls.

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

For other Motion Control Components, Applications, and Technology from Servo2Go go to: http://MotionControlBuyersGuide.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Customer Driven AC Servo Design

Motion Control Servo System

The mid-level, general-purpose 1S Series Servos incorporate valuable input from our customers to optimize use from design to commissioning.

Lower Costs and Total Cost of Ownership
The 1S Series eliminates up to 20% of hidden servo system costs to the customer by no longer requiring separate external parts such as servodrive controller cable, terminal block for I/O, safety cable, brake relay and absolute encoder battery and cable.  Regardless of power rating, all 1S power drives have a uniform height to simplify design and improve control cabinet air circulation. We streamlined I/O connection, replacing an external terminal and cable with a pluggable connector with push-in terminals that allows wiring to be prepared separately. In the process, we increased the number and mix of supported I/O.  The end user benefits from lower maintenance costs.

Advances for High Accuracy Machines
The 1S servomotors use a gear-less/battery-less, multi-turn 23-bit absolute encoder, 16-bit multi-turn to provide accurate position input. Advanced tuning functions help shorten settling time, allowing faster production speeds and greater throughput.
Expanded Built-in Safety Capability

Machine safety for rotating hazards takes a prominent position in equipment design since the recent changes in injury liability. To help OEMs simplify safety system design and standardize on one series without stocking many separate drives, the 1S Series servodrives offer both networked and hardwired safe torque off built in. Configuration of FailSafe over EtherCAT (FSoE) only requires connecting NX Series safety control units to 1S Series servos  via open network “EtherCAT”. No wiring is required for the emergency stop of each axis for servo.
First Wave of 1S Servos

The first wave satisfies 100 W to 3 kW applications. Future releases will address power requirements of higher and lower power ratings.

To Down Load the 1S Series AC Servo System Catalog CLICK HERE

To view YouTube Video CLICK HERE

For additional on the 1S Series AC Servo System CLICK HERE

To subscribe to OMRON Newsletters CLICK HERE

To contact OMRON about this or other industrial products CLICK HERE

KEEP YOUR WORKPLACE SAFE! – GET A ‘GOTCHA-STICK” CLICK HERE

Motion Control – AxCent Servo Drives for Centralized Motion Control Systems!

Motion Control Servo2Go-Logo

Motion Control Servo Drives from Servo2GoGreenville, DE — Motion Control – Servo Drives – The AxCent™ Servo Drive (Axes for Centralized control schemes) product platform from ADVANCED Motion Controls brings the proven and powerful performance expected of ADVANCED Motion Controls, with improvements to the design architecture that utilize our years of experience in the industry and the latest advancements in modern servo system design.

Motion Control AxCent drives operate with brushless (3Φ) permanent magnet motors as well as brushed (1Φ) motors and inductive loads, and are a cost effective solution that provide high performance and simplicity.

More information on the on the motion control AxCent Servo Drives from Advanced Motion Controls can be viewed at: https://www.servo2go.com/search.php?search=Axcent&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – AMC’s Family of Servo Amplifiers!

AMC's Motion Control Servo Amplifierss Available from Servo2Go

Servo2Go-Logo

Greenville, DE –— Motion Control – Advanced Motion Controls (AMC) is a world leading servo drive manufacturer providing solutions for motion control. Today, servo drives are an essential part of motion control systems, and AMC servos are an excellent foundation for high performance. Advanced Motion Controls has become synonymous with servo solutions that are reliable, cost-effective, customer specified and delivered on time.

Currently, AMC offers hundreds of standard servo drive and amplifier models, accept various command signals, communicate over several networks and operate in many different modes. For instance, the digital product line supports several different interface options including: analog input, step and direction, encoder following, RS-232/485, CANopen or SynqNet™. These same interfaces can be found on servo drives with power output capabilities ranging from 20W up to 40KW of peak output!

Available AMC Products by Network connections (centralized or distributed servo systems):

  • CANopen
  • RS232, RS485
  • EtherCAT
  • EPL
  • Ethernet PowerLink
  • SynqNet

We also have technology to support the following interfaces: DeviceNet, Ethernet TCP/IP, FireWire, Profibus, USB, Universal Serial Bus and Sercos.

Products include:

  • Brush DC Servo Drives
  • Trapezoidal Brushless Servo Drives
  • Digital Input Sinusoidal Brushless Servo Drives
  • Analog Input Sinusoidal Brushless Servo Drives
  • PWM Input Servo Drives
  • CANopen Brushless Servo Drives
  • SynqNet Brushless Servo Drives
  • Single Phase Input Models
  • Power Supplies & Accessories
  • PCB mounted Extended Environment Models available in both digital and analog varieties

The family of AMC’s Servo Amplifiers can be viewed at: https://www.servo2go.com/supplier.php?id=1031080098

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 FREE or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – DC and Brushless Servo Motor Driver From MotiCont – A Motion Company

DC Servo Motor Drive from MotiCont - A Motion Company

Van Nuys, CA – This series of drivers is a high performance, cost effective servo motor driver to implement intelligent motion control. The driver incorporates an advanced architecture and surface mount technology to achieve an exceptional power density.

This series is designed to drive voice coil, brush-type and brushless DC motors at a high switching frequency. They receive step and direction signals or analog signal from motion controller.

Features

* Runs DC and Brushless Servo Motors
* Four Quadrant Regenerative Operation
* Space Vector Modulation (SVM) Technology
* Fully Digital State-of-the-art Design
* Programmable Current, Velocity and Position Loops Gain Settings
* Fully Configurable Current, Voltage, Position Limits
* PID + FF Position Loop
* Up to 12 Amp Motor Output
* +20 VDC to +80 VDC Power Supply
* Protected Against Over Current
* Built-in Signal Generator, Sinusoidal, Square Wave and Triangular
* 20 KHz PWM Frequency
* No Tachometer Feedback Needed
* 0 ºC to 70 ºC Operating Temperature
* Modular 2-Piece Power, Motor, Signal Connector

Modes of Operation

* Current
* Velocity
* Position

Command Source

* Encoder Following
* ±10 V Analog
* Opto-isolated Step and Direction

Feedback Supported

* Hall Effect Sensor
* Incremental Encoder
* ±10 V Analog
* Auxiliary Incremental Encoder

For additional information contact MotiCont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

New Harsh Environment Motion Control Servo Drives From Servo2Go

Servo2GoVisit Our Website
Follow us on Twitter

Greenville, DE — Servo2Go.com announces the release of the ‘AZX’ series of embedded, extended environment servo drives, from Advanced Motion Controls of Camarillo, CA, designed to conquer the most demanding of applications!

OEM’s have typically been challenged when attempting to implement motion control electronics exposed to extreme or harsh conditions. Well, not anymore! Available now are servo drives specifically made to handle outdoor, mobile and otherwise rugged environment applications. With extended temperature range, shock/vibration protection and overall increased robustness, the AZX series of embedded, plug-in modules are not only capable but powerful, compact and affordable solutions.

The AZX series servo drives can control brushed, brushless or voice coil motors under conditions where other products shudder to go. This is especially true since uncompromising reliability is paramount and costs critical to an OEM’s success. Check out these capabilities:

  • Heat sink temperature shutdown at +115°C (239°F)
  • Ambient operating temperatures from –40° to +85°C
  • Full temperature range cycling under 2 minutes
  • Shock up to 15g’s at 11 msec, ½ sine
  • Vibration up to 30grms’s on all 3 axes
  • Lightweight at only 95 grams (3.35 oz)
  • 10 to 80 VDC input power range
  • ~97% {max.} efficiency

  • When precise control of motion is required in some of the harshest of environments, the AZX’s capabilities can meet or exceed survivability requirements. Engineering design considerations made to military standards guarantee operations that set new motion control standards for extreme environments.


    Additional information on the AZX series servo amplifiers can be found at-http://servo2go.com/search.php?search=AZXB&D=PROD

    For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com