Category Archives: Stages – Rotary

Motion Control – High Precision, Compact 300 mm, Hollow Core, Motorized Rotary Stage!

Motion Control – Rotary Stage

Motion Control -Rotary Stage

OES Logo

Van Nuys, CA – — Motion Control – The new AY110-300 Motorized Rotary Stage from Optimal Engineering Systems, Inc. (OES) features a large 180 mm (7.087 in.) open aperture. This precision, large open aperture (hollow core), low profile stage is just 65 mm (2.559 in.) high and it’s foot print is only 303 mm by 319 mm (11.929 in. by 12.559 in.) not including the motor. The rotary table of the stage has a precise pattern of threaded holes for mounting custom tooling and fixtures, and holes in the base for easy integration into new and existing applications. The diameter of the rotary table is 300 mm (11.811 in.) and the range of travel is a full 360o, and it is capable of continuous rotation. The table is driven by a smooth 288:1 worm gear and has a resolution of 0.000625o with a 10 micro-step per step stepper motor driver. The AY110-300 Rotary Stage is also available with a servo motor and optical encoder. The standard model is equipped with stepper motor and a is a knob for manual adjustment which can be replaced with an optical encoder for precision position verification.

The low cost, low profile AY110-300 Rotary Stage features a very low backlash of 0.0005o, and a positional accuracy of 0.001o, making it ideal for: laser positioning and machining, scribing, microscopy, testing, assembly, inspection, alignment, and other critical applications. This black anodized stage has a load capacity of 65Kg (143 lbs) and there is an indicator scale for visual sighting of the angle of rotation. The stage can be ordered with Plug-and-Play with a fully compatible controller from OES.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com


See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – High Precision, Low Profile, Compact 100 mm Motorized Rotary Stage Available from OES!

motion control OES Rotary Stage

 

OES Logo

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) now offers a high precision, low profile, compact motorized rotary stage, the AY110-100-SC. This precision stage is just 1.772 in. (45 mm) high and the foot print is only 4.764 in. by 6.693 in. (121 mm by 170 mm). The stage has a pattern of threaded mounting holes in the rotary table and holes in the base for easy integration into new and existing applications. The diameter of the table is 3.937 in. (100 mm) and the range of travel of the AY110-100-SC Rotary Stage is a full 360o and it is capable of continuous rotation. The table is driven by a 180:1 worm gear at up to 14o per second and has a resolution of 0.0001o with a 10 micro-step per step stepper motor driver. The stage is also available with a servo motor and optical encoder. When configured with the standard stepper motor there is a knob for manual adjustment which can be replaced with an optical encoder for precision position verification

The low cost, low profile AY110-100-SC rotary stage features a parallelism of 80 microns, a backlash of 0.0005o, surface roundness of 15 microns, positional accuracy of 0.001o, and a transmission deviation of 5 microns making it ideal for: Microscopy, laser positioning and machining, inspection, assembly, testing, and other critical applications. This black anodized stage has a load capacity of 99 lbs (45Kg) and there is an indicator scale for visual sighting of the angle of rotation. The stage can be ordered plug-and-play with a fully compatible controller from OES.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Zero-Backlash Servo Rotary Indexing Table!

Electromate offers Zero Backlash Rotaru from Sankyo

Motion Control - Electromate-Logo

 

 

Vaughan, Ontario, Canada — Motion Control Components — The Sankyo Automation RollerDrive® Reducer is a precision gear reducer that uses a zero backlash roller gear mechanism. The unit is constructed from an input shaft and a turret (output shaft) that is assembled with roller followers. The roller followers are preloaded against a screw-like input shaft to eliminate backlash.

Sankyo servo indexing tables offer a constant lead cam with a servo motor drive for programmable motion. Sankyo servo indexing tables provide fast highly accurate motion, with the added capability to move medium to heavy loads. The preloaded cam & turret provides a high performance zero-backlash servo indexing table for all your automation needs.

The RU Series servo indexing table is available in 11 different sizes. These servo indexing tables come with varying ratios to maximize the motor’s torque capacity, speed requirements and enhance the overall accuracy. Special applications may require double reduction ratio of the internal cam and an additional reducer to provide large torque capacities or slower speed.

Features include:

  • Zero-Backlash -The RollerDrive uses a unique preloaded mechanism to completely eliminate backlash and deliver output motions that are faithfully true to input commands
  • Second Reducer Option -Multiple reducer options keep the servo at optimal RPM speed
  • Rigidity Suitable for Machining Applications -An exclusive ouput turret bearing and cast-iron housing toleratres heavy vibrations associated with machine tool applications
  • Versatile for Retooling -RU Series can keep pace with the ever-changing tooling requirements
  • Short settling times – The RollerDrive provides fast highly accurate dynamic motion

CLICK HERE to view performance data and additional information about the RU Series servo indexing table is available in 11 different sizes.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Zero-Backlash Servo Rotary Indexing Table!

Electromate offers Zero Backlash Rotaru from Sankyo

Motion Control - Electromate-Logo

 

 

Vaughan, Ontario, Canada — Motion Control Components — The Sankyo Automation RollerDrive® Reducer is a precision gear reducer that uses a zero backlash roller gear mechanism. The unit is constructed from an input shaft and a turret (output shaft) that is assembled with roller followers. The roller followers are preloaded against a screw-like input shaft to eliminate backlash.

Sankyo servo indexing tables offer a constant lead cam with a servo motor drive for programmable motion. Sankyo servo indexing tables provide fast highly accurate motion, with the added capability to move medium to heavy loads. The preloaded cam & turret provides a high performance zero-backlash servo indexing table for all your automation needs.

The RU Series servo indexing table is available in 11 different sizes. These servo indexing tables come with varying ratios to maximize the motor’s torque capacity, speed requirements and enhance the overall accuracy. Special applications may require double reduction ratio of the internal cam and an additional reducer to provide large torque capacities or slower speed.

Features include:

  • Zero-Backlash -The RollerDrive uses a unique preloaded mechanism to completely eliminate backlash and deliver output motions that are faithfully true to input commands
  • Second Reducer Option -Multiple reducer options keep the servo at optimal RPM speed
  • Rigidity Suitable for Machining Applications -An exclusive ouput turret bearing and cast-iron housing toleratres heavy vibrations associated with machine tool applications
  • Versatile for Retooling -RU Series can keep pace with the ever-changing tooling requirements
  • Short settling times – The RollerDrive provides fast highly accurate dynamic motion

CLICK HERE to view performance data and additional information about the RU Series servo indexing table is available in 11 different sizes.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – XY-Theta Alignment Stage Featuring High Resolution and High Repeatability Is Available from OES!

Motion Control - OES Motorized XY Theta Alignment Stage

 

OES Logo

Van Nuys, CA – — Motion Control Components – Alignment Stage – The XYR-03-01 Alignment Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, high repeatability XY-Theta stage for such applications as: Angular glass cutting and grinding, wafer alignment, semiconductor handling, laser cutting and drilling. The linear resolution of the X and Y axis is 5µ (non-micro-step) or 0.125µ (20 micro-steps per step motor driver in use), the repeatability is 1.5µ, and positional accuracy is 5µ. The 1 mm per-turn lead screws and preloaded V-groove and crossed roller bearings add to the high precision and stiffness of the XYR-03-01 alignment stage. The linear travel of the X and Y axes is 50 mm x 50 mm.

The 100 mm diameter theta stage is driven by a precision 90:1 ratio worm gear. The resolution of the theta stage is 0.02O (non Micro-step) or 0.001O (20 Micro-steps per step motor driver in use). Repeatability is 0.005O, positional Accuracy is 0.01O and backlash is 0.005O.

Two-phase stepper motors are standard. The knob for manual adjustments of each axis can be replaced with an incremental encoder for position verification or closed loop operation. These black anodized Aluminum XY-Theta stages are easy to integrate into new or existing systems. Compatible Motion Controllers are available from OES and the XYR-03-01 Alignment Stage can also be ordered as a complete plug-and-play system.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Four Axis Vacuum Compatible Gantry from H2W Technologies.

H2W Technologies Four-Axis-Vacuum-Compatible Gantry

H2W Logo

Santa Clarita, CA —– Motion Control — Fully vacuum compatible four axis positioning gantry (XYTZ). The XY axes are driven by brushless linear motor DR Positioning Stages. The Theta axis is a worm gear stage that is driven by a rotary stepper motor under closed loop control in conjunction with an arc-segmented linear encoder. The Z axis linear motion is achieved by using a voice coil positioning stage operating under closed loop position control. The four axes operate under synchronized position control in conjunction with a non-contact analog output position feedback device that is used to control the position with respect to a silicon wafer. The stage includes a fully integrated four axis electronics package that allow each axis to operate under closed loop control..

All components were selected for their low outgassing characteristics and the system was designed to fit within a customer designed vacuum chamber. This gantry was designed to perform secondary processing procedures on a silicon wafer while exposed to a vacuum.

Features:

  • Vacuum Compatible
  • Rotary axis is capable of full 360 degree rotation
  • Includes mounting holes for payload
  • Payload up to 10 lbs (4.4 kg)
  • Small footprint
  • Coordinated four axis control
Multi-Axis Stage
Product Details (PDF) PDF Tag
XY Horizontal Axis (Brushless Linear Motor Stage)
Motor P/N
Stroke 6.2 in 157.48 mm
Encoder Resolution 0.2 micron
Force @ 100% Duty 20.6 lbs 91.6 N
Force @ 10% Duty 61.8 lbs 274.8 N
Vertical Axis (Voice Coil Motor Stage)
Motor P/N NCC10-30-108-1H 
Stroke 1 in 25.4 mm
Encoder Resolution 0.2 micron
Force @ 100% Duty 10.8 lbs 48 N
Force @ 10% Duty 32.4 lbs 144 N
Rotary Axis (Rotary Stage)
Motor P/N N/A
Stroke +-10 degrees +-0.17 rads
Encoder Resolution 0.29 arc-seconds
Force 1416 oz-in 10 N-m

YouTube Video

https://www.youtube.com/watch?time_continue=8&v=MFLkSiqwSJI

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube
Visit our Blog

Application – Rotary Table from Intellidrives Tackles Big Wafers!

INTELLIDRIVES’s Direct drive rotary servo tables.

Intellidrives Motion Control Component - Rotary Table for Big Wafers

Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – The ACR-335UT direct drive rotary table from IntelLiDrives adapts linear motor technology, coupled with precision bearings, to provide faster and more accurate handling of the 300 mm semiconductor wafers.

The 335 mm diameter center opening in the ACR-335UT rotary table easily accommodates large 300 mm (12 inch) semiconductor wafers, allowing for extraction of the chip dies from the wafer during semiconductor assembly manufacturing processes or dual side wafer inspection.

Presently, semiconductor assembly equipment manufacturers do only limited wafer rotation, but ACR-335UT stage goes 360°, at up to 300 rpm speed.

Intellidrives Motion Control Component - Rotary Table for Big Wafers Actuator

This large angle wafer rotation can be done without need to align wafer carrier before placement on the table, thereby increasing throughput. An XY table that carries the rotary table is used for linear Cartesian Alignment. The large open center allows equipment above and below the table to extract precut integrated circuit dies cut from the 300 mm wafer or to do dual side wafer measurement and inspection.

 

Intellidrives Motion Control Component - Rotary Table for Big Wafers in XY Frame

Today’s mechanical drive technologies used in processing 200 mm (8 inch wafers) such as gear drive, worm drive and belt all lack positioning stiffness and accuracy. While worm gear rotary tables can fully rotate wafer , it speed is in single digit rpm. Belt drives can rotate at high speeds, but low belt stiffness and high drive inertia results is low accuracy and poor dynamics.

While these characteristics could be tolerated in the past, since it was not until advent of the large semiconductor wafers that a high accurate, precise and large open aperture rotary actuator was needed.

The ACR-335UT rotary table is essentially a linear motor “curved” to form a ring. There are 16 RotoLinear motoring modules (up 24 modules can be installed for higher torque capability) within the ring that forms the motor. Axial placement of these modules along with the ultra-thin bearing system allowed design of the very low profile rotary stage.

The positioning stiffness of the direct drive ACR-350UT rotary table allows it to achieve and to maintain arc-sec accuracy at hundreds of rpm and excellent dynamics even during fast Cartesian (XY) wafer indexing.

Also vital, and the major manufacturing challenges, were the tight tolerances on the axial and radial bearings that allowed to achieve both axial and radial run-outs well under 10 microns.

AccuRing rotary tables provide superior angular positioning and are designed to eliminate backlash, friction and wear problems associated with worm, gear and belt drives. Low maintenance and high throughput characteristics of the AccuRing stage yields the lowest total cost of ownership.

Compact package and Superior design of the AccuRing rotary stages was optimized to minimize stage height. The low profile of the stage reduces total system working height. Angular contact bearings are used to maximize performance with respect to wobble, moment stiffness and friction. AccuRing stage has large clear center aperture that can be used for air or wire line feed-through or beam delivery.

AccuRing utilizes direct drive three phase planar brushless motor technology. There are no brushes to replace and no gear trains or belts to maintain. Coreless magnetic design assures smooth rotation and dynamic performance.

Accurate Positioning is assured with contact-less encoder. The motor and rotary encoders are directly coupled to eliminate coupling backlash. The low inertia and zero backlash make AccuRing the ideal solution for applications requiring frequent directional changes.

Applications:

  • Semiconductor assembly
  • Electronics assembly
  • Precision machine tools
  • Robotic handlers
  • Wafer processing
  • Automation
System Performance Unit ACR-335UT
Center aperture mm 335
Outside diameter mm 463
Stage height mm 22
Peak Torque Tp

(Nm)

100
Continuous torque

air cooling, coil 120°C

Tc120

(Nm)

25
Peak current at Tp Amp p rrms 15
Continuous current at Tc Amp c rrms 4
Recommended voltage (note 1) Uvdc

Uvac

310

220

Max speed at Tp and Us

(note 2)

RPM
Max speed at Tc and Us

(note 2)

RPM 120
Positioning resolution

(note 3)

counts/rev

 

5,820,000 (standard)

11,640,000

(optional)

Positioning resolution (arc-sec) 0.22
Accuracy Arc-sec <10
Repeatability Arc-sec <1
Run-out axial/radial micron <10
Rotor Inertia kg x m2 0.2
Stage weight M (Kg) 10
Axial load M (Kg) 50

Note 1: Rotary table can operate at lower voltages with lower speeds

Note 2: Speed values shown at rated torque

Note 3: Max speed may be limited by controller’s encoder frequency input.

Sin/cos 1 Vpp and other encoder resolutions available.

Contact the factory.

Intellidrives Motion Control Component - Rotary Table for Big Wafers Drawings

TO SEE VIDEO – LARGE APERTURE ULTRA THIN DIRECT DRIVE ROTARY TABLE – CLICK HERE

TO SEE VIDEO – INTEGRATED LARGE APERTURE XY – ROTARY SYSTEM – CLICK HERE

FOR ADDITIONAL INFORMATION – CLICK HERE

About IntelLiDrives —

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL

Motion Control – Low Cost, High Precision XYθ Alignment Stages from OES!

OES Logo

Van Nuys, CA – Optimal Engineering Systems’ (OES) low profile, XYθ (theta) stages are designed for high precision alignment applications. These stages move in an XY-plane and rotate around the center of the XY-plane. The terms alignment table, or XY-rotation stage are often used interchangeably with XYθ, or XY-theta stage. Available in 12 models, in two precision grades, these stages have linear travels from +/- 2 mm by +/- 2 mm (+/- 0.078 in by +/- 0.078 in) up to +/- 30 mm by +/- 30 mm (+/-1.181 in by +/- 1.181 in). Additionally, XYθ (theta) stages can rotate around the center of the XY plane up to +/- 6O. Four models of the XYθ (theta) stages have solid tables that are sized from 100 mm by 100 mm (3.937 in by 3.937 in) to 200 mm by 200 mm (7.874 in by 7.874 in), and eight stages, from 250 mm x 250 mm (9.843 in by 9.843 in) to 1500 mm by 1500 mm (59.055 in by 59.055 in), are hollow core (open frame) stages.

Available in Normal and Precision grades, these XYθ (theta) stages have preloaded cross roller bearings and typical Normal Repeated Positioning Accuracy is from +/- 1.75 µm to +/- 2.5 µm, and typical Precision Repeated Positioning Accuracy is from +/- 0.7 µm to +/- 1.0 µm.

Parallelism of these XYθ (theta) Stages is as low as 30 µm, and the larger stages can handle dynamic loads to 600 kg (1323 lbs). The stages’ surfaces are treated to ensure durability and they are compatible with OES’ line of Motion Controllers. XYθ (theta) Stages can be ordered with linear encoders for closed loop operation, customized to meet specific requirements, and complete ready to run alignment systems.

Typical applications include: Panel Lamination Machinery, panel Film Laminating Machines, print Screen and 3D printing, CNC equipment, angular glass cutting & grinding equipment, wafer alignment equipment, exposure equipment, and semi-conductor equipment.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, , E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Ultra-Thin Large Aperture Direct Drive Rotary Tables (DDR) from Intellidrives!

Intellidrives Motion Control Component - Ultra Thin Rotary Table

Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – UltraThin ServoRing rotary tables provide superior angular positioning and are designed to eliminate backlash, friction and wear problems associated with worm, gear and belt drives. Low maintenance and high throughput characteristics of the AccuRing stage yields the lowest total cost of ownership.

Compact package and Superior design of the AccuRing rotary stages was optimized to minimize stage height. The low profile of the stage reduces total system working height. Angular contact bearings are used to maximize performance with respect to wobble, moment stiffness and friction. AccuRing stage has large clear center aperture that can be used for air or wire line feed-through or beam delivery.

AccuRing utilizes direct drive three phase planar brushless motor technology. There are no brushes to replace and no gear trains or belts to maintain. Coreless magnetic design assures smooth rotation and dynamic performance.

Accurate Positioning is assured with contact-less encoder. The motor and rotary encoders are directly coupled to eliminate coupling backlash. The low inertia and zero backlash make AccuRing the ideal solution for applications requiring frequent directional changes

Idear for: Semiconductor assembly, electronics assembly, precision machine tools, Robotic handlers, wafer processing, and automation.

Specifications

System Performance

Unit

ACR-160UT

Center aperture mm

158

Outside diameter mm

287

Stage height mm

22

Peak Torque Tp

(Nm)

24

Continuous torque

air cooling, coil 120°C

Tc120

(Nm)

8

Peak current at Tp

Amp p rrms

15

Continuous current at Tc

Amp c rrms

4

Recommended voltage (note 1) Uvdc

Uvac

310

220

Max speed at Tp and Us

(note 2)

RPM

300

Max speed at Tc and Us

(note 2)

RPM

500

Positioning resolution

(note 3)

counts/rev

3,600,000 (standard)

7,200,000

(optional)

Positioning resolution (arc-sec)

0.36

Accuracy Arc-sec

<10

Repeatability Arc-sec

<1

Run-out axial/radial micron

<10

Rotor Inertia kg x m2

0.06

Stage weight M (Kg)

6

Axial load M (Kg)

30

Note 1: Rotary table can operate at lower voltages with lower speeds

Note 2: Speed values shown at rated torque

Note 3: Max speed may be limited by controller’s encoder frequency input.

Sin/cos 1 Vpp and other encoder resolutions available.

Contact the factory.

Intellidrives Motion Control Component - Ultra Thin Large Aperture Rotary Table drawing

 

FOR ADDITIONAL INFORMATION – CLICK HERE

 

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL

Motion Control – Intellidrives Offers Direct Drive Rotary Stage!

ACR-32UT has a very wide dynamic speed range and can move at sub-rpm speed with low velocity ripple and can accelerate quickly to 1,500 rpm.

Intellidrives Motion Control Component - Rotary Table

Motion Control Components - Intellidrives-Logo
Visit our Website

 

Philadelphia, PA, — Motion Control Components and Systems – The ACR-32UT precision rotation stage is a low profile rotary table with a high-speed direct-drive rotary servo motor. The 32 mm center aperture and lightweight construction makes this rotary stage an ideal choice for handling 300 mm silicon wafers for semiconductor processing

ACR-32UT has a very wide dynamic speed range and can move at sub-rpm speed with low velocity ripple and can accelerate quickly to 1,500 rpm. This stage can be easily installed into IntelLiDrives low profile open frame XY tables with a minimal stack-up height to minimize Abbe error.

These features make the ACR-32UT outperform the stability, acceleration and settling speed of traditional servo motor gear-driven mechanisms, according to the company. IntelLiDrives offers a wide range of servo amplifiers and advanced controllers to provide a complete, integrated package.

System Performance Unit ACR-32UT
Center aperture mm 32
Outside diameter mm 116
Stage height mm 22
Peak Torque Tp

 (Nm)

15
Continuous torque

air cooling, coil 120°C

Tc120

(Nm)

5
Peak current at Tp Amp p rrms 15
Continuous current at Tc Amp c rrms 4
Recommended voltage (note 1) Uvdc

Uvac

310

220

Max speed  

(note 2, 3)

RPM 1,400
Positioning resolution

(note 3)

counts/rev

 

3,600,000 (standard)

7,200,000

(optional)

Positioning resolution (arc-sec) 0.60
Accuracy Arc-sec <10
Repeatability Arc-sec <1
Run-out axial/radial micron <10
Rotor Inertia kg x m2 0.05
Stage weight M (Kg) 3

>

Axial load M (Kg) 10

 

Note 1: Rotary table can operate at lower voltages with lower speeds

Note 2: Max speed shown with no external torque applied

Note 3: Max speed may be limited by controller’s encoder frequency input.

            Sin/cos 1 Vpp and other encoder resolutions available.

            Contact the factory.

Intellidrives Motion Control Component - Rotary Table

 

 

For additional information CLICK HERE!

For Youtube video CLICK HERE!

To request additional information CLICK HERE!

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

 

Motion Control – Linear-XY-Rotary Combination Stages from Intellidrives!

Intellidrives Motion Control Component - XY Rotary Stages

Motion Control Components - Intellidrives-Logo

 

 

 

 

 

 

 

 

 

 

Philadelphia, PA, — Motion Control Components and Systems – The Linear XY and Rotary Combination stages are compact, high-performance linear positioning and Rotary stages are perfect for the confines of the laboratory while providing the high reliability required in a production environment.

Features:

  • Low 42 mm height actuators
  • Stroke 100 mm to 600 mm
  • Precision ball bearings
  • Motorized Rotary stage
  • Compact multi-axes configuration
  • Stepper, Servo, SMART motors

Intellidrives Motion Control Component - XY Rotary Stages Composite Photo

They are the ideal choice for measurement, testing, accurate alignment and component assembly.

The precision ball-screw provides accuracy, repeatability and positioning resolution capability to 1 micron.

The linear ball bearings provide smooth travel and excellent payload characteristics

The RTLA-30-100 rotary stages incorporate a precision worm-gear drive mechanism and bearing components for accurate positioning performance over the lifetime of the product.

Compact in size, with only 100×100 mm footprint, RTLA-30-100 has center aperture 30 mm and low profile 45 mm. Choices of worm gear ratios 180:1, 90:1, 45:1 are available to achieve range of rotation speeds and translated resolution of 1.8 arc-sec.

Stages can be fitted with stepper motor, brush-less servo motor with rotary encoder or integrated SMART motors.

Links to Specific Series of Linear XY Rotary Combination Stages:

XYR-BSMA-LY-110-50×50+RTLA-0-60 … XY stroke 50×50 mm

XYR-BSMA-LY-110-75×75+RTLA-0-60 … XY stroke 75×75 mm

XYR-BSMA-LY-110-75×75+RTLA-30-100 … XY stroke 75×75 mm

XYR-BSMA-LY-110H-30×30+RTLA-0-60 … XY stroke 30×30 mm

XYR-BSMA-LY-140H-100×100+RTLA-30-100 … XY stroke 100×100 mm

XYR-BSMA-LY-140H-200×200+RTLA-30-100 … XY stroke 200×200 mm

XYR-BSMA-LY-140H-300×300+RTLA-30-100 … XY stroke 300×300 mm

XYR-GA-BSMA-LY-140H-300×300-RTLA-30-100 … XY stroke 300×300 mm

XYR-GA-BSMA-LY-140H-300×300-RTLA-60-150 … XY stroke 300×300 mm

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL

WATER-TIGHT and DUST-PROOF ROTARY SERVO TABLES (DDR) from Intellidrives!

INTELLIDRIVES’s Direct drive rotary servo tables feature IP rated ingress protection.

Intellidrives Motion Control Component - IP Rated Rotary Table

Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – IP RATING – Direct drive rotary servo tables feature IP rated ingress protection. IP rating assures against ingress of water and external particles. IP65 rating assures against ingress of dust and small water jets. IP66 rating assures, in addition to IP65, against ingress of powerful water jets. IP67 rating assures, in addition to IP66, against water penetration under heavy water jets and when partially submerged.

Intellidrives Motion Control Component - IP Rated Rotary Servo Table

 

DIRECT DRIVE TECHNOLOGY – DIRECT DRIVE rotary tables provide superior angular positioning and are designed to eliminate backlash, friction and wear problems associated with worm, gear and belt drives. Low maintenance and high throughput characteristics of the DDR stages yields the lowest total cost of ownership. INTELLIGENT ACTUATORS can easily “talk over” USB 2.0, Ethenet, RS232, RS485 interfaces and come with powerful yet easy to use software packages. for system start-up and integration, like communication drivers, linkable DLL libraries, National Instruments Labview drivers and VI examples, GUI and easy-to-use DXF conversion software.

These rotary tables utilizes direct drive three phase brushless motor technology. There are no brushes to replace and no gear trains or belts to maintain.

ABSOLUTE ENCODER – Accurate Positioning performance is assured with precision ABSOLUTE encoder that provides arc-sec positioning resolution. The motor and rotary encoders are directly coupled to eliminate coupling backlash.

Absolute encoder keeps track of its position at all times, and provides it as soon as power is applied. This feature is particularly useful in applications where the equipment has power turned off between uses. No need to move to home sensor or index pulse to establish a reference position.

FOR ADDITIONAL INFORMATION – CLICK HERE

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL