Motion Control – Joysticks Van Nuys, CA – — OES (Optimal Engineering Systems, Inc.) has expanded its line of Joysticks for 1, 2 and 3 axis Stages and Actuators. These are easy to use, single-handed, ergonomic joysticks that provide proportional control of the X, Y, and Z axis of from one to three actuators. Low, […]
Archive for the ‘Stages – XY Theta’ Category
Motion Control – Joysticks for Controlling the X, Y, and Z Axes of 1, 2 and 3 axis Stages and Actuators are Plug-and-Play, and Low Cost!
Posted by Editor on May 10th, 2022
Posted in Gimbal Stage, Goniometer Stage, Joystick, Linear Positioning Stage, Linear Stage, Positioning Stage, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ 
Comments Off on Motion Control – Joysticks for Controlling the X, Y, and Z Axes of 1, 2 and 3 axis Stages and Actuators are Plug-and-Play, and Low Cost!Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!
Posted by Editor on April 4th, 2022
Motion Control – Vertical Lift Stage Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm […]
Posted in Elevator Stage, Gimbal Stage, Goniometer Stage, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Motion Controller, Positioning Stage, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY Comments Off on Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!Motion Control – New High Precision, Low Profile XY Open Aperture Stage Features 1 Micron Resolution and 2 Micron Repeatability!
Posted by Editor on March 4th, 2022
Motion Control – Open Aperture Stage Van Nuys, CA – — Motion Control – OES (Optimal-Engineering Systems, Inc.) has added a new, high precision open aperture stage to it’s expanding line of precision XY stages. The AU200-100×100 stage is a low profile stage measuring just 80 mm (3.150 in.) high with a compact footprint […]
Posted in Elevator Stage, Gimbal Stage, Goniometer Stage, Linear Positioning Stage, Positioning Stage, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage Comments Off on Motion Control – New High Precision, Low Profile XY Open Aperture Stage Features 1 Micron Resolution and 2 Micron Repeatability!Motion Control – Large Open Aperture XY Alignment Stages Feature: High Resolution and High Repeatability!
Posted by Editor on February 4th, 2022
Motion Control – Open Aperture XY Alignment Stage Van Nuys, CA – — Motion Control – New high resolution and high repeatability Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). Supplied with a standard 4 mm-per-turn ground lead screw, the AU200-200×200 Alignment Stages feature 200 mm (7.874 in.) of […]
Posted in Joystick, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Large Open Aperture XY Alignment Stages Feature: High Resolution and High Repeatability!Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!
Posted by Editor on January 18th, 2022
Motion Control – Open Aperture XY Stages! Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and […]
Posted in Joystick, Linear Positioning Stage, Linear Stage, Positioning Stage, Robot - Components, Robots -XYZ and Theta, Rotary Stage, Rotary Stage - Large Apreture, Rotary Stage - Yaw & Tilt, Stage - Miniature, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages XY Comments Off on Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on December 31st, 2021
Motion Control – Miniature Hollow Core Rotary Stage Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced a high precision, low profile, miniature size rotary table, the AR39-AH. This high precision miniature size rotary stage is just 35 mm (1.378 in.) high and the footprint including the standard 2-phase 1.8 […]
Posted in Actuator, Actuator - Linear, Actuator - Linear and Rotary, Actuator - Rotary, Actuators, Actuators - Hollow Shaft, Alignment Stage, Controller, Controller - Brushed, Controller - Brushless, Controller - Multi-Axis, Controller - Steppers, Controller - Voice Coil Motors, Controller Module, Controllers - Solenoids, Drivers - Step Motor, Drivers - Stepper Motor, Drives - Brushed, Drives - Brushless, Drives - DC, Drives - Servo, Elevator Stage, Gimbal Stage, Goniometer Stage, Joystick, Linear Actuators, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Motion Controller, Positioning Stage, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - Sub micron Positioning, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, Stepper Motor Controller Comments Off on Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!Motion Control – High Precision, XAB Triple-Axis (2 Goniometers and X-Axis) Stage Available from OES!
Posted by Editor on December 6th, 2021
Motion Control – Triple-Axis Stage! Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low cost solution for the precise measurement of compound angles or the rotation of an object to precise angular positions. The XAB-050-XX-01 integrates a two-axis Alpha-Beta goniometer on top of a […]
Posted in Actuator, Actuators, Elevator Stage, Gimbal Stage, Goniometer Stage, Linear Slides, Linear Stage, Motion Control System - XY-Rotary Stage, Positioning Stage, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY Comments Off on Motion Control – High Precision, XAB Triple-Axis (2 Goniometers and X-Axis) Stage Available from OES!Motion Control – High Precision Motorized Vertical Elevator Stages Are Available from OES!
Posted by Editor on November 8th, 2021
Motion Control – Elevator Stages Van Nuys, CA – — Motion Control- Optimal Engineering Systems, Inc. (OES) has released two new high precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm respectively. The vertical motion of each Z-Axis Stage […]
Posted in Actuator, Actuator - Linear, Actuators, Elevator Stage, Linear Positioning Stage, Linear Stage, Positioning Stage, Stage - Vertical Lift, Stages, Stages - Custom, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Voice Coil, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis Comments Off on Motion Control – High Precision Motorized Vertical Elevator Stages Are Available from OES!Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on October 11th, 2021
Motion Control – Miniature Hollow Core Rotary Stage Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced a high precision, low profile, miniature size rotary table, the AR39-AH. This high precision miniature size rotary stage is just 35 mm (1.378 in.) high and the footprint including the […]
Posted in Actuator, Actuator - Rotary, Actuators, Actuators - Hollow Shaft, Controller, Controller - Brushless, Controller - Steppers, Drives - Brushed, Drives - Servo, Joystick, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Motion Controller, Positioning Stage, Rotary, Rotary Actuator, Rotary Stage, Rotary Stage - Yaw & Tilt, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, Theta (Axis), Vertical Lift Stage, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on September 9th, 2021
Motion Control – Stepper Motor Motion Control Systems Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Posted in Actuators, Alignment Stage, Controller, Controller - Multi-Axis, Controller - Steppers, Drivers, Drivers - Step Motor, Drivers - Stepper Motor, Elevator Stage, Linear Motion Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Motion Controller, Positioning Stage, Rotary Stage, Rotary Stage - Large Apreture, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Custom, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!Motion Control – NEW! Three-axis Gimbal Mount with Three-Phase Brushless Servo Motors has Higher Resolution and Speed!
Posted by Editor on August 10th, 2021
Motion Control – Servo Motor Three-axis Gimbal Mount! Van Nuys, CA – The New AU300-AER-02 Three-axis Gimbal Mount from OES (Optimal Engineering Systems, Inc.) with Three-Phase Brushless Servo Motors and Quadrature Incremental Encoders features very high resolution and high speed. Each axis features: Low backlash worm gear drives and precision “V” groove and cross roller […]
Posted in Actuator, Actuator - Linear, Actuators, Gimbal Stage, Goniometer Stage, Linear Stage, Positioning Stage, Stages, Stages - Custom, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - Sub micron Positioning, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY Comments Off on Motion Control – NEW! Three-axis Gimbal Mount with Three-Phase Brushless Servo Motors has Higher Resolution and Speed!Motion Control – Case Study: Precision Ground Ball Screw Drives Universal Pipetting Module!
Posted by Editor on April 20th, 2020
Motion Control Case Study – Pipetting COVID-19 Testing / Sampling Applications Reaching New Levels of Speed, Lifetime, and Force Sensitivity Woburn, MA –Motion Control Components Ball Screws – Case Study – Situation: In the area of automated laboratory equipment, servo-controlled pipetting modules are a key component of high-throughput systems. A major, global OEM had been […]
Posted in Application Stories, Ball Screws, Ball Screws - Miniature, Linear Stage, Miniature Ball Screws, Positioning Stage, Stage - Linear & Rotary Positioning, Stages, Stages - Custom, Stages - X, Stages - X and Rotary, Stages - XY - Open Aperture, Stages - XY Theta, Stages XY Comments Off on Motion Control – Case Study: Precision Ground Ball Screw Drives Universal Pipetting Module!Motion Control – XY-Theta Alignment Stage Featuring High Resolution and High Repeatability Is Available from OES!
Posted by Editor on June 27th, 2018
Van Nuys, CA – — Motion Control Components – Alignment Stage – The XYR-03-01 Alignment Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, high repeatability XY-Theta stage for such applications as: Angular glass cutting and grinding, wafer alignment, semiconductor handling, laser cutting and drilling. The linear resolution of the X and […]
Posted in Positioning Stage, Robots, Rotary Stage, Stage - Linear & Rotary Positioning, Stages, Stages - Rotary, Stages - XY Rotary, Stages - XY Theta, Stages XY Comments Off on Motion Control – XY-Theta Alignment Stage Featuring High Resolution and High Repeatability Is Available from OES!Motion Control – Low Cost, High Precision XYθ Alignment Stages from OES!
Posted by Editor on October 11th, 2017
Van Nuys, CA – Optimal Engineering Systems’ (OES) low profile, XYθ (theta) stages are designed for high precision alignment applications. These stages move in an XY-plane and rotate around the center of the XY-plane. The terms alignment table, or XY-rotation stage are often used interchangeably with XYθ, or XY-theta stage. Available in 12 models, in […]
Posted in Positioning Stage, Stages, Stages - Rotary, Stages - X, Stages - XY Rotary, Stages - XY Theta Comments Off on Motion Control – Low Cost, High Precision XYθ Alignment Stages from OES!XY Gantry Robot with Theta-Control from Intellidrives!
Posted by Editor on March 6th, 2017
Philadelphia, PA, — Motion Control Components and Systems – Repeatability and accuracy are essential characteristics of any motion control system, and the objective of the design is to assure the desired trajectories can accurately follow through the working range of the system. In traditional XY gantry designs upper gantry member (Y axis) is carried by […]
Posted in Motion Control System - XY-Rotary Stage, Robot, Robots, Stages - XY Rotary, Stages - XY Theta Comments Off on XY Gantry Robot with Theta-Control from Intellidrives!
