Category Archives: Stepper Motor Driver

Motion Control – AMC’s STAC6-Q-H – Advanced Step Motor Drive for Hazardous Locations

Motion Control - Electromate offers AMC-STAC6-Q-H-Stepper Drive

Motion Control - Electromate-Logo

 

Motion Control – The Only Internationally Certified Hazardous Location Stepper Drive Available

 

Vaughan, Ontario, Canada — Motion Control Components – The STAC6 offers best-in-class anti-resonance that ensures optimal performance of the step motor over the widest speed range. The drive is powered by single-phase 120 VAC which generates a nominal 160 volt DC internal bus voltage capable of driving the highest torque NEMA 34 and 42 frame step motors on the market.

Features include:

  • ATEX and IECEx certified for Class I, Zone 2 locations
  • UL certified for Class 1, Div 2, Group C & D locations
  • HazLoc Step Motor Drive
  • HazLoc certified for USA, Canada, Europe and Middle East
  • Advanced anti-resonance algorithm
  • Torque ripple smoothing
  • Microstepping to 51,200 steps/rev
  • Encoder feedback option for enhanced system accuracy using Stall Detection and Stall Prevention
  • Designed for use with high quality NEMA 23, 24, 34 and 42 frame step motors
  • 7 digital inputs, 3 digital outputs, all optically isolated
  • 2 analog inputs, +/-10 volt range
  • Supply Voltage: 94-135 VAC, 50/60 Hz, single-phase
  • Input Power: 120 Vac, 1 Phase, 1.67 A (rms)
  • Output Power: 120 Vdc, 1 phase, 4.24 A (rms), Continuous Duty Rating
  • Control Modes: Streaming Commands, Analog Positioning, Encoder Following, Q Programming
  • Output Current: 0.5-6.0 A/phase, peak-of-sine
  • Communication Ports: RS-232, RS-485
  • Idle Current Reduction: 0-100%
  • Setup Method: Software setup
  • Dimensions: 6.35 x 4.66 x 2.31 inches
  • Weight: 32 oz.
  • Ambient Temperature Range: -40 to +55 °C (-40 to +131 °F)
  • Ambient Humidity: 90% max, non-condensing

CLICK HERE to view more information on the STAC6-Q-H Advanced Step Motor Drive for Hazardous Locations from Applied Motion Products.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Integrated Stepper Motors with Profinet!

motion control integrated stepper motors with profinet

JVL Offers Integrated Stepper Motors with Profinet. The Industrial Ethernet, Profinet, integrates existing systems and equipment bringing the features of Ethernet to the factory floor.

JVL Logo

Birkerød, Denmark and Morrow, OH (USA) – Automation Motion Control – Recognized as a world leader in integrated motors JVL has added Profinet Industrial Ethernet capabilities to their NEMA 34 Series of integrated steppers with programmable controllers. Available in 4 torque ratings of 3,0 Nm (26.6 in.lb), 6,0 Nm (53.1 in. lb.), 9,0 Nm (79.7 in. lb.), and 12,0 Nm (106.2 in. lb.) these very compact integrated steppers (the MIS340 is just 95 mm (3.74 in. long), include all necessary electronics within the IP67 rated motor housing. the quiet, precision, powerful MIS340 Series steppers are ideal for: Industrial, medical, inspection, testing, and processing applications.

The expanded ethernet protocols of the MIS340 series of integrated steppers from JVL easily connect to Ethernet bus systems such as: EtherCAT, Ethernet I/P, Powelink, ModbusTCP, Sercos III and Profinet. Additionally they are available with bluetooth, ZigBee, WLAN, PLC, RS485, and CANbus. These high performance steppers are also available with separate SMC85 controller. Options include: Electronic gearing, 9.53 mm (0.375 in.) or 14 mm (0.551 in.) diameter shafts, absolute multi-turn encoder, and planetary gear heads.

These high performance steppers feature a very high 409,600 steps per revolution 4,096 microsteps per step) for extremely smooth and quiet operation. The integrated PLC features 8 I/Os, RS-422 and RS485 connections for encoders, and point-to-point or multi axes operations to 254 axes. The 12-80 VDC supply provides high torque (0-9 A RMS (12.6 A peak) at high speed, and the control 12 to 28 VDC can maintain position value, etc. in emergency situations.

About JVL – JVL is recognized as a world leader for its development of efficient and compact integrated motors for VAC and VDC. MAC motor series of integrated VAC servo motors (up to 4500 W and 13,5 kW peak), and the QuickStep integrated stepper motors (up to 25 Nm). Both the servo motor and stepper motor series includes the controller, PLC, encoder, AC power supply and bus system integrated into one compact unit. All industrial ethernet busses like Profinet, EtherCat, Ethernet IP, Modbus TCP, Powerlink, Sercos III etc. are available. Furthermore, traditional modules like CANopen, DeviceNet, Profibus, Nano PLC, RS232/RS485/USB, Process Control can be incorporated.

JVL with more than 25 years of motion control experience enjoys a reputation for the development of highly specialized integrated motors with industrial Ethernet and customized improvements. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications. JVL’s wide selection of quality products for motion control components include: Integrated VAC and VDC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Brakes, Gears, and HMI Modules.

For further information, please contact: JVL Industri Elektronik A/S, Bregnerodvej 127, DK-3460 Birkerød, Denmark. Tel. +45 4582 4440. E-mail: jvlnyt@jvl.dk. Web: www.jvl.dk

JVL USA • Att: Mike Fisher • National Sales Manager
8610 Morrow-Rossburg Rd • Morrow • OH 45152-9444
E-mail: mfisher@jvlusa.com • Tel.: 513/877-3134 •Tel.: 513/282-0888 (Tech Support Line) •
Fax: 513/877-2471•
For Additional Information about Mike Fisher and JVL USA – Click Here

 

USA and Canada – Reps & Distributors: – Click Here

 

All Other Countries:

Further information can be obtained from:

JVL Industri Elektronik A/S

Bregnerodvej 127, DK 3460, Birkerød, Denmark

E-mail: jvj@jvl.dk Tel.: +45 4582 4440 ; Fax.: +45 4582 5550 ;

For JVL Home Office and World Wide Directory of Reps & Distributors Click Here

JVL Logo
Visit our Website
Order Our Catalog
Request Newsletter
JVL-Trade Fairs
Twitter Link
Facebook Link

Integrated QuickStep NEMA23 Stepper Motors, A Wise Choice When Building an Automation/Motion Control System!

Motion Control MIS 23 Stepper Motors from JVL

JVL Logo

Birkerød, Danmark, and Morrow, OH — MIS23 QuickStep stepper motors are a series of versatile, compact, economical integrated stepper motors from JVL. Integrated stepper motors in the MIS23 series have NEMA 23 flange dimensions of 57×57 mm and are available in three models with rated torques of: 1.1 Nm (MIS231), 1.6 Nm (MIS232), 2.5 Nm (MIS234) (1000 RPM @ 48VDC). To reduce cost and protect against electrical noise many of the control and communication functions have been integrated with the motor in a housing designed to provide IP42, IP55 or IP65 protection, and eliminating the need for running control and communication cables. Different PCB’s (modules) can be mounted within the housing to create an automation/motion control system that is easy to incorporate into new and existing applications.

Among the many features that can be integrated are: Pulse/direction driver, serial RS485 position controller with easy graphical programming, point-to-point or multiaxis operation up to 255 axes on the same RS485 bus, CANOpen DS-301 and DSP-402, optional absolute singleturn magnetic encoder with resolution of up to 1024 pulses/revolution for stall detection, 8 I/O that can be configured as input, output or 10bit analogue input, electronic gearing for following an encoder or pulse train in an arbitrarily selectable controlled ratio, high speed position capture.

The MIS23 Series of stepper motors follows the same protocol as MAC motors so that MAC motors and QuickStep motors can be connected to the same RS485 bus, and a double voltage-supply available so that position and parameters are maintained during emergency stop. They also feature: Fixed 1600 pulses/revolution for version with built-in position controller, 200, 400, 800, 1000, or 1600 pulses/revolution for versions with pulse/direction inputs.

All modules are supplied with M12 connectors. MIS23 QuickStep motors require a power supply of 12-48V DC. Backlash-free and planetary gears in different ratios can also be supplied. Additionally the Quickstep series also includes larger versions like the MIS34 (NEMA 34), MIS43 (NEMA 43), and MIS51 (NEMA 51) with even more options, such as Ethernet.

About JVL – JVL is recognized as a world leader for its development of efficient and compact integrated motors for VAC and VDC. MAC motor series of integrated VAC servo motors (up to 4500W and 13,5kW peak), and the QuickStep integrated stepper motors (up to 25Nm). Both the servomotor and stepper motor series includes the controller, PLC, encoder, power supply and bussystem integrated into one compact unit. All industrial Ethernet protocols like Profinet, EtherCAT, Ethernet/IP, Modbus TCP, Powerlink, Sercos III etc. are available. Furthermore, traditional modules like CANopen, DeviceNet, Profibus, Nano PLC, RS232/RS485/USB, Process Control can be incorporated.

JVL has more than 25 years of motion control experience and enjoys a reputation for the development of highly specialized integrated motors with industrial Ethernet and customized improvements. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications.

JVL’s wide selection of quality products for motion control components include: Integrated VAC and VDC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Brakes, Gears, and HMI Modules.

For further information, please contact: JVL Industri Elektronik A/S, Bregnerodvej 127, DK-3460 Birkerød, Denmark. Tel. +45 4582 4440. E-mail: jvlnyt@jvl.dk. Web: www.jvl.dk

JVL USA • Att: Mike Fisher • National Sales Manager
8610 Morrow-Rossburg Rd • Morrow • OH 45152-9444
E-mail: mfisher@jvlusa.com • Tel.: 513/877-3134 •Tel.: 513/282-0888 (Tech Support Line) •
Fax: 513/877-2471•
For Additional Information about Mike Fisher and JVL USA – Click Here

 

USA and Canada – Reps & Distributors: – Click Here

 

All Other Countries:

Further information can be obtained from:

JVL Industri Elektronik A/S

Bregnerodvej 127, DK 3460, Birkerød, Denmark

E-mail: jvj@jvl.dk Tel.: +45 4582 4440 ; Fax.: +45 4582 5550 ;

For JVL Home Office and World Wide Directory of Reps & Distributors Click Here

JVL Logo
Visit our Website
Order Our Catalog
Request Newsletter
JVL-Trade Fairs
Twitter Link
Facebook Link