Motion Control – XYZ-Goniometer Positioning Stages Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) is unveiling their new XYZ-Goniometer Series of Four-axes Stages. Any of the three Goniometers Stages with +/- 10 degrees, +/- 15 degrees or +/- 45 degrees of travel can be integrated with X, Y, and Z […]
Archive for the ‘X-Y-Theta Stage’ Category
Motion Control – Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!
Posted by Editor on May 18th, 2023
Posted in Alignment, Alignment Stage, Components, Controller - Brushed, Controller - Brushless, Controller - Multi-Axis, Controller - Steppers, Gimbal Stage, Goniometer Stage, Joystick, Linear Slides, Linear Stage, Positioning Stage, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, Tilt, X - Y Stage, X-Y-Theta Stage, Y Axis 
Comments Off on Motion Control – Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!
Posted by Editor on April 12th, 2023
Motion Control – 600 MM Vertical Lift Stages Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm. The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 […]
Posted in Alignment, Components, Controller - Brushed, Controller - Brushless, Controller - Multi-Axis, Controller - Steppers, Elevator Stage, Gimbal Stage, Goniometer Stage, Joystick, Linear Motion Positioning Stage, Linear Stage, Motion Controller, Positioning Stage, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - Sub micron Positioning, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, Theta (Axis), Tilt, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!Motion Control – Precision Manual XYZ Stage from OES!
Posted by Editor on February 20th, 2023
Motion Control – Precision Manual XYZ! Van Nuys, CA —– Motion Control – This manual crossed roller XYZ-axis positioning stage is made of aluminum alloy with an black anodized coating. The table size is 25 x 25 mm has a body weight of 0.16 Kgf. The maximum load of this super thin table […]
Posted in Components, Linear Motion Positioning Stage, Linear Stage, Miniature Components, Miniature Stage, Positioning Stage, Positioning Stage - Miniature, Stage - Linear & Rotary Positioning, Stage - Miniature, Stage - Vertical Lift, Stages - Custom, Stages - X, Stages - X Y Z, Stages - X-Theta, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Vertical Lift Stage, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Precision Manual XYZ Stage from OES!Motion Control – Motorized Rotary Stage, the AR39-AH Available from OES!
Posted by Editor on December 17th, 2022
Motion Control – Motorized Rotary Stage! Van Nuys, CA —– Motion Control – Rotary Stages – A rotary stage is a component of a motion system used to restrict an object to a single axis of rotation. The terms rotary table or rotation stage are often used interchangeably with rotary stage. Our […]
Posted in Actuator, Actuator - Rotary, Positioning Stage, Rotary Stage, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage Comments Off on Motion Control – Motorized Rotary Stage, the AR39-AH Available from OES!Motion Control – 1, 2, 3 and 4 Axes of Motion Controllers for Servos and Steppers are Low Cost and Plug-and-Play!
Posted by Editor on November 4th, 2022
Motion Control – Motion Controllers for Servos and Steppers! Van Nuys, CA – — Motion Control – Need a quick and easy solution to install a single or multi-axis Plug-and-Play motion controller? The answer: The MCC Series of stepper and servo motor controllers from OES (Optimal Engineering Systems) which are designed to control from one […]
Posted in Components, Controller, Controller - Brushed, Controller - Brushless, Controller - Multi-Axis, Controller - Steppers, Controller - Voice Coil Motors, Drivers, Drivers - Step Motor, Drivers - Stepper Motor, Drives - Brushed, Drives - Brushless, Drives - Servo, Elevator Stage, Gimbal Stage, Goniometer Stage, Joystick, Linear Actuators, Linear Stage, Motion Control System, Motion Controller, Positioning Stage, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - Sub micron Positioning, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, Vertical Lift Stage, X - Y Stage, X-Y-Theta Stage, Y Axis Comments Off on Motion Control – 1, 2, 3 and 4 Axes of Motion Controllers for Servos and Steppers are Low Cost and Plug-and-Play!Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!
Posted by Editor on October 8th, 2022
Motion Control – 0.03 micron Resolution Elevator Stage! Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES). These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables […]
Posted in Actuators, Components, Controller, Controller - Brushed, Controller - Brushless, Controller - Multi-Axis, Controller - Steppers, Elevator Stage, Gimbal Stage, Goniometer Stage, Joystick, Linear Motion Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Positioning Stage, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - Sub micron Positioning, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!Motion Control – Large Open Aperture XY Alignment Stages Feature: High Resolution and High Repeatability!
Posted by Editor on February 4th, 2022
Motion Control – Open Aperture XY Alignment Stage Van Nuys, CA – — Motion Control – New high resolution and high repeatability Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). Supplied with a standard 4 mm-per-turn ground lead screw, the AU200-200×200 Alignment Stages feature 200 mm (7.874 in.) of […]
Posted in Joystick, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Large Open Aperture XY Alignment Stages Feature: High Resolution and High Repeatability!FDA/USDA and 3A-Dairy Compliance Brochure features Linear Motion Components from LM76!
Posted by Editor on December 27th, 2021
Motion Control – FDA/USDA/3A-Dairy Compliance Brochure E. Longmeadow, MA — Motion Control Components – Linear Motion – Food processing and beverage plants’ wash down areas are unique environments that undergo harsh treatment from high pressure washers, steam, and a multitude of caustic chemicals used in the cleaning and sanitizing production equipment. OEMs and maintenance departments […]
Posted in Application Stories, Bearings, Bearings - Ceramic, Bearings - Linear, Bearings - Linear - Seals, Bearings - Powder Metal, Bearings - Radial, Bearngs - ETX, Cam Followers, Cam Followers - Ceramic, Cam Followers - FDA/USDA Compliant, Ceramic Bearings - Radial, Components, Custom Components, Custom Components - Shafting, FDA/USDA/3A-Dairy Compliant, High Speed Linear Drive System, HMI Displays, Linear Bearings, Linear Bearings - Seals (Scraper), Linear Positioning Stage, Linear Rail Systems, Linear Slides, Linear Stage, Pillow Block - Locking, Pillow Blocks, Positioning Stage, Stages, Stages - Custom, Tutorials, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on FDA/USDA and 3A-Dairy Compliance Brochure features Linear Motion Components from LM76!Motion Control – High Precision Motorized Vertical Elevator Stages Are Available from OES!
Posted by Editor on November 8th, 2021
Motion Control – Elevator Stages Van Nuys, CA – — Motion Control- Optimal Engineering Systems, Inc. (OES) has released two new high precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm respectively. The vertical motion of each Z-Axis Stage […]
Posted in Actuator, Actuator - Linear, Actuators, Elevator Stage, Linear Positioning Stage, Linear Stage, Positioning Stage, Stage - Vertical Lift, Stages, Stages - Custom, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Voice Coil, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis Comments Off on Motion Control – High Precision Motorized Vertical Elevator Stages Are Available from OES!Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on October 11th, 2021
Motion Control – Miniature Hollow Core Rotary Stage Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced a high precision, low profile, miniature size rotary table, the AR39-AH. This high precision miniature size rotary stage is just 35 mm (1.378 in.) high and the footprint including the […]
Posted in Actuator, Actuator - Rotary, Actuators, Actuators - Hollow Shaft, Controller, Controller - Brushless, Controller - Steppers, Drives - Brushed, Drives - Servo, Joystick, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Motion Controller, Positioning Stage, Rotary, Rotary Actuator, Rotary Stage, Rotary Stage - Yaw & Tilt, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, Theta (Axis), Vertical Lift Stage, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on September 9th, 2021
Motion Control – Stepper Motor Motion Control Systems Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Posted in Actuators, Alignment Stage, Controller, Controller - Multi-Axis, Controller - Steppers, Drivers, Drivers - Step Motor, Drivers - Stepper Motor, Elevator Stage, Linear Motion Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Motion Controller, Positioning Stage, Rotary Stage, Rotary Stage - Large Apreture, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Custom, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!Motion Control – Low Cost, High Precision XYθ Alignment Stages from OES!
Posted by Editor on December 26th, 2014
Van Nuys, CA – Optimal Engineering Systems’ (OES) low profile, XYθ (theta) stages are designed for high precision alignment applications. These stages move in an XY-plane and rotate around the center of the XY-plane. The terms alignment table, or XY-rotation stage are often used interchangeably with XYθ, or XY-theta stage. Available in 12 models, in […]
Posted in Positioning Stage, X-Y-Theta Stage Comments Off on Motion Control – Low Cost, High Precision XYθ Alignment Stages from OES!
