Motion Control – 0.03 micron Resolution Elevator Stage! Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES). These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables […]
Archive for the ‘Z Axis’ Category
Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!
Posted by Editor on October 8th, 2022
Posted in Actuators, Components, Controller, Controller - Brushed, Controller - Brushless, Controller - Multi-Axis, Controller - Steppers, Elevator Stage, Gimbal Stage, Goniometer Stage, Joystick, Linear Motion Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Positioning Stage, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - Sub micron Positioning, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis 
Comments Off on Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!Motion Control – Low Cost, High Precision 3 Axes Linear Voice Coil Actuator!
Posted by Editor on July 11th, 2022
Motion Control – XYZ Axis Voice Coil Actuator Van Nuys, CA – Moticont has released a new three axis XYZ linear actuator the XYZ-10. The X and Y axes of the actuator each has a 0.97 in. (24.6 mm) of travel and the Z axis has a stroke of 0.500 in. (12.7 mm). The […]
Posted in Actuator, Actuator - Linear, Actuators, Linear Actuators, Linear Motion Positioning Stage, Linear Motor - Open Aperture, Linear Motor Drives - Miniature, Linear Motors, Linear Motors - Brushless, Linear Motors - Miniature, Linear Positioning Stage, Linear Stage, Motion Control System, Motors, Motors - Brushless, Motors - Linear, Motors - Miniature, Motors - Servo, Positioning Stage, Stage - Vertical Lift, Stages - Gimbal, Stages - Voice Coil, Stages - X, Stages - XY Rotary, Voice Coil - Hollow Core, Voice Coil Motors, Voice Coil Stage, X - Y Stage, Z Axis Comments Off on Motion Control – Low Cost, High Precision 3 Axes Linear Voice Coil Actuator!Motion Control – Large Open Aperture XY Alignment Stages Feature: High Resolution and High Repeatability!
Posted by Editor on February 4th, 2022
Motion Control – Open Aperture XY Alignment Stage Van Nuys, CA – — Motion Control – New high resolution and high repeatability Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). Supplied with a standard 4 mm-per-turn ground lead screw, the AU200-200×200 Alignment Stages feature 200 mm (7.874 in.) of […]
Posted in Joystick, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Large Open Aperture XY Alignment Stages Feature: High Resolution and High Repeatability!FDA/USDA and 3A-Dairy Compliance Brochure features Linear Motion Components from LM76!
Posted by Editor on December 27th, 2021
Motion Control – FDA/USDA/3A-Dairy Compliance Brochure E. Longmeadow, MA — Motion Control Components – Linear Motion – Food processing and beverage plants’ wash down areas are unique environments that undergo harsh treatment from high pressure washers, steam, and a multitude of caustic chemicals used in the cleaning and sanitizing production equipment. OEMs and maintenance departments […]
Posted in Application Stories, Bearings, Bearings - Ceramic, Bearings - Linear, Bearings - Linear - Seals, Bearings - Powder Metal, Bearings - Radial, Bearngs - ETX, Cam Followers, Cam Followers - Ceramic, Cam Followers - FDA/USDA Compliant, Ceramic Bearings - Radial, Components, Custom Components, Custom Components - Shafting, FDA/USDA/3A-Dairy Compliant, High Speed Linear Drive System, HMI Displays, Linear Bearings, Linear Bearings - Seals (Scraper), Linear Positioning Stage, Linear Rail Systems, Linear Slides, Linear Stage, Pillow Block - Locking, Pillow Blocks, Positioning Stage, Stages, Stages - Custom, Tutorials, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on FDA/USDA and 3A-Dairy Compliance Brochure features Linear Motion Components from LM76!Motion Control – Don’t Just Settle! Select the “Right” Miniature Linear Voice Coil Motor for the Application!
Posted by Editor on December 16th, 2021
Motion Control – Miniature Linear Voice Coil Motor! Van Nuys, CA — Motion Control Components – Moticont has added two miniature linear voice coil motors to its LVCM family of Linear Voice Coil Motors! Sharing the same physical dimensions, each is just 1.000 in. (25.4 mm) in diameter and the housings are 1.500 in. (38.1 […]
Posted in Actuator, Actuator - Linear, Actuators, Controller - Voice Coil Motors, Electric Cylinder, Linear Actuators, Linear Actuators - High Force, Linear Motion Positioning Stage, Linear Motor - Open Aperture, Linear Motors, Linear Motors - Brushless, Linear Motors - Miniature, Linear Positioning Stage, Linear Slides, Linear Stage, Miniature Motors, Motors, Motors - Brushless, Motors - Linear, Motors - Miniature, Motors - Servo, Positioning Stage, Stages, Stages - Voice Coil, Stages - X, Stages - X - Open Apeture, Stages - X Y Z, Stages - XY - Open Aperture, Voice Coil - Hollow Core, Voice Coil Motors, Voice Coil Stage, X - Y Stage, Y Axis, Z Axis Comments Off on Motion Control – Don’t Just Settle! Select the “Right” Miniature Linear Voice Coil Motor for the Application!Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on October 11th, 2021
Motion Control – Miniature Hollow Core Rotary Stage Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced a high precision, low profile, miniature size rotary table, the AR39-AH. This high precision miniature size rotary stage is just 35 mm (1.378 in.) high and the footprint including the […]
Posted in Actuator, Actuator - Rotary, Actuators, Actuators - Hollow Shaft, Controller, Controller - Brushless, Controller - Steppers, Drives - Brushed, Drives - Servo, Joystick, Linear Motion Positioning Stage, Linear Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Motion Controller, Positioning Stage, Rotary, Rotary Actuator, Rotary Stage, Rotary Stage - Yaw & Tilt, Stage - Vertical Lift, Stages, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, Theta (Axis), Vertical Lift Stage, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on September 9th, 2021
Motion Control – Stepper Motor Motion Control Systems Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Posted in Actuators, Alignment Stage, Controller, Controller - Multi-Axis, Controller - Steppers, Drivers, Drivers - Step Motor, Drivers - Stepper Motor, Elevator Stage, Linear Motion Positioning Stage, Linear Stage, Motion Control System, Motion Control System - XY-Rotary Stage, Motion Controller, Positioning Stage, Rotary Stage, Rotary Stage - Large Apreture, Stage - Linear & Rotary Positioning, Stage - Vertical Lift, Stages, Stages - Custom, Stages - Elevator, Stages - Gimbal, Stages - Goniometer, Stages - Rotary, Stages - Rotary - Clear Aperature, Stages - X, Stages - X - Open Apeture, Stages - X and Rotary, Stages - X Y Z, Stages - X-Theta, Stages - XY - Open Aperture, Stages - XY Rotary, Stages - XY Theta, Stages - XYZ & Rotary, Stages - XZ, Stages - Yaw, Stages - Yaw and Pitch, Stages XY, X - Y Stage, X-Y-Theta Stage, Y Axis, Z Axis Comments Off on Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!Motion Control -What To Consider When Specifying A Linear Slide
Posted by Editor on July 27th, 2021
Motion Control – Tutorial Considerations when specifying a linear slide for a new or existing application. By Mike Quinn • LM76 When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this: Does an off-the-shelf linear slide (or a stock […]
Posted in Application Stories, Bearing and Drive System, Bearings, Bearings - Ceramic, Bearings - Linear, Bearings - Linear - Seals, Bearings - Radial, Bearngs - ETX, Custom Components, Custom Components - Shafting, Linear Bearings, Linear Guide Systems, Linear Motion Positioning Stage, Positioning Stage, Stages, Stages - Custom, Stages - X, Stages - X - Open Apeture, Stages - X Y Z, Stages - XY - Open Aperture, Stages - XZ, Stages XY, Tutorials, White Papers, X - Y Stage, Y Axis, Z Axis Comments Off on Motion Control -What To Consider When Specifying A Linear SlideMotion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES
Posted by Editor on July 7th, 2021
Motion Control – Profile Rail Stages Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm […]
Posted in Actuator, Actuator - Linear, Linear Actuators, Linear Guide Systems, Linear Positioning Stage, Linear Rail Systems, Linear Stage, Positioning Stage, Stages - X, Stages - X Y Z, Stages - XZ, Stages - Yaw and Pitch, Stages -Pitch and Rol, Stages XY, X - Y Stage, Y Axis, Z Axis Comments Off on Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES
