Archive for May, 2017

Motion Control – Introducing Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings!

  Vaughan, Ontario, Canada — Motion Control -Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the […]

Motion Control – Linear-XY-Rotary Combination Stages from Intellidrives!

                    Philadelphia, PA, — Motion Control Components and Systems – The Linear XY and Rotary Combination stages are compact, high-performance linear positioning and Rotary stages are perfect for the confines of the laboratory while providing the high reliability required in a production environment. Features: Low 42 […]

Motion Control – FDA/USDA/3A-Dairy Compliant ETX Scraper Seals for Linear Bearings Used In Food Processing Applications!

E. Longmeadow, MA Motion —  – Linear Motion – LM76 has introduced FDA/USDA/3-A Dairy compliant, snap-in ETX Scraper Seals for linear bearings. Machined from Ertalyte® PET-P, ETX Scraper Seals have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures than seals from other materials. Designed with a slight […]

Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!

Motion Control – Vertical Lift Stage Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 […]

Motion Control – New Profinet Interface for POSITAL’s Explosion-Proof Rotary Sensors

  Vaughan, Ontario, Canada – Motion Control Components – POSITAL has added an optional Profinet communications interface to its range of explosion-proof IXARC rotary encoders. These devices have been designed to comply with ATEX/IECEx directives for Category 3 electrical products and are suitable for Zone 1 and Zone 21 conditions (potential exposure to hazardous levels […]

Low-cost Tin-Can Stepper Motors from Nippon Pulse feature high torque and compact size!

Greenville, DE —-Motion Control Components – The PF/PFC series tin-can stepping motors are conventional magnet-driven rotary stepper motors with a permanent magnet in their rotor core. Rotating in proportion to the number of pulses sent to the motor, the stepper motor is frequency synchronized and can change speed depending on the frequency of the pulse […]

WATER-TIGHT and DUST-PROOF ROTARY SERVO TABLES (DDR) from Intellidrives!

INTELLIDRIVES’s Direct drive rotary servo tables feature IP rated ingress protection.   Philadelphia, PA, — Motion Control Components and Systems – IP RATING – Direct drive rotary servo tables feature IP rated ingress protection. IP rating assures against ingress of water and external particles. IP65 rating assures against ingress of dust and small water jets. […]

Powered by WordPress | Designed by: Virtual Dedicated Servers | Compare Top WordPress Themes, wordpress 4 themes and