Motion Control – Z-axis Stages
Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Motion Control – Sub-micron Z-Axis Positioning Stages with Four Motor Options Introduced by OES!
Posted by Editor on January 30th, 2025
Motion Control – Kollmorgen Expands P8000 Series with P80360 Stepper Drive
Posted by Editor on January 23rd, 2025
Motion Control – Stepper Motor Drive!
Motion Control – High Torque Outputs and Flexible Installation Options for Heavy-duty Industrial Applications
Vaughan, Ontario, Canada – Motion Control -Kollmorgen has announced the launch of the P80360 stepper drive, the latest addition to its P8000 series. This new drive brings advanced functionality to the series, including closed-loop position control and full programmability, combining the precision of servo systems with the reliability and simplicity of stepper technology.
Motion Control – NEW! YouTube Channel features High Precision Stages from Optimal Engineering Systems!
Posted by Editor on January 16th, 2025
Motion Control – OES YouTube Channel!
Van Nuys, CA —– Motion Control – Optimal Engineering Systems, Inc. (OES) has unveiled their new YouTube Channel https://www.youtube.com/@oesmotioncontrolvideos. Checkout their new video featuring the AK110-10-15 Alpha-Beta Dual axis Goniometer Stage.
Motion Control – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!
Posted by Editor on January 9th, 2025
Motion Control – Linear Actuator
Van Nuys, CA – Motion Control – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length!
Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!
Posted by Editor on January 8th, 2025
Motion Control – Three-Axis Stage!
Van Nuys, CA – — Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, lasers, tracking and scanning systems.
FDA/USDA and 3A-Dairy Compliance Brochure features Linear Motion Components from LM76!
Posted by Editor on January 2nd, 2025
Motion Control – FDA/USDA/3A-Dairy Compliance Brochure
E. Longmeadow, MA — Motion Control Components – Linear Motion – Food processing and beverage plants’ wash down areas are unique environments that undergo harsh treatment from high pressure washers, steam, and a multitude of caustic chemicals used in the cleaning and sanitizing production equipment.
Motion Control – Rotational Voice Coil Stage Offers Galvo Like Performance at a Fraction of the Size and Cost!
Posted by Editor on December 26th, 2024
Motion Control – Rotational Scanner
The Motion Control RVC-9025 Rotational Voice Coil Stage provides a means to quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution.
Forestville, CA, — The motion control RVC-9025 provides galvo like performance at a fraction of the size and cost. It is capable of positioning a mirror anywhere within its ±22.5° mechanical range in about a millisecond with micro-radian resolution.
Motion Control – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!
Posted by Editor on December 19th, 2024
Motion Control – Multi-axis Motion Controllers
Van Nuys, CA – All Motion Control – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.
Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!
Posted by Editor on December 12th, 2024
Motion Control – Push Type Open Frame Solenoid
Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of the user.
Motion Control – Maxon Adds Dynamism to Robotic Servo Motors
Posted by Editor on December 5th, 2024
Motion Control – Motors and Gearheads
Motion Control Advanced Compact Motors and Gearheads for High-Performance Robotics
Motion Control – Vaughan, Ontario, Canada -Electromate, Canada’s premier distributor of motion control solutions, is proud to announce the release of maxon’s EC Frameless DT50 Motor and ECX Flat Series DC Motors and Gearheads, designed to meet the demands of modern robotics and automation systems. The EC and ECX Series motors and gearheads offer compact, efficient drive systems with exceptional torque and power density, making them ideal for applications requiring precise motion control.
Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!
Posted by Editor on November 28th, 2024
Motion Control – Electric Cylinder Has Zero Cogging
Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.
The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator.
Motion Control – Radial Hybrid Bearings are More Efficient, Lighter, Smoother, and Longer Lasting!
Posted by Editor on November 21st, 2024
Motion Control – Hybrid Radial Bearings
E. Longmeadow, MA — Motion Control – CERAMICSPEED Hybrid Radial Bearings are designed for environments of high humidity, have been approved in accordance with FDA 21 CFR (Code of Federal Regulation covering medicine and food), and have an EC No. 1935/2004 authorization. Superior life and performance when compared to bearings made from just stainless steel, these Bearings feature very smooth ceramic balls that will not deform or spall under high loads, and synthetic material ball cages.
Motion Control – Miniature Voice Coil Stage features 1 Micron Repeatability!
Posted by Editor on November 14th, 2024
Motion Control – Miniature Voice Coil Stage!
Forestville, CA, — Motion Control – This VCS-10V Voice Coil Stage: 10mm of linear motion; Ball bearing guidance system; 1 micron position repeatability; 40 G’s acceleration; Non-contact electro-optic position sensor; Kinematic load mount; Direct SCA814 Servo Controlled Amplifier compatibility; 33 x 36 x 76mm, 230 grams
Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Posted by Editor on November 7th, 2024
Motion Control – Stepper Motor Motion Control Systems
Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Motion Control – Select the Low Cost, Economical, Bi-Directional Latching Solenoid Best Suited for an Application!
Posted by Editor on October 31st, 2024
Motion Control – Latching Solenoids
Motion Control – Van Nuys, CA –Latching Bi-Directional Solenoids released by Magnetic Sensor Systems (MSS) are low cost, economical to use, and easy to integrate into an application. The S-18-100LC2 and S-18-100LF2 Latching Bi-Directional Solenoids feature the same compact dimensions: 1.00 in. wide x 0.84 in. high x 1.73 in. long with 6-32 threaded Push/Pull plungers.
The plungers have a travel of 0.19 in. and in the extended position are 0.50 in. long, two 8-32 (or optional M4) threaded mounting holes are located on the underside of the solenoids.
Motion Control – New Harmonic Drive HPF Series: High-Performance Hollow Shaft Gear Unit
Posted by Editor on October 24th, 2024
Motion Control – Compact 1.25 Micron Resolution Direct Drive Linear Actuator Features High Speed, Zero Cogging!
Posted by Editor on October 17th, 2024
Motion Control Stage- Hollow Core Voice Coil Stage
Van Nuys, CA – Motion Control – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont.
Motion Control – Low Cost, High Accuracy, Straight and Curved Rail & Roller Block Systems!
Posted by Editor on October 10th, 2024
Motion Control – Curved Rail & Roller Block Systems
E. Longmeadow, MA –Motion Control – SAIBO is one of world recognized manufacturers of precision power transmission components. SAIBO group has two divisions, linear motion division and bearing division. Linear Product Division mainly produces curved rail and conveyor, telescopic rail and fork, linear guide, linear module, belt conveyor etc. Bearing Division mainly produces Thin-section bearing, High-speed angular contact ball bearing, linear bearing etc.
Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!
Posted by Editor on October 3rd, 2024
Motion Control – Miniature Linear Voice Coil Stage
Motion Control – VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.
Motion Control – High Precision, High Load Goniometer Stages with +/- 30 Degrees of Travel Are Available from OES!
Posted by Editor on September 26th, 2024
Motion Control – Goniometer Stages
Van Nuys, CA – – Motion Control – Optimal Engineering Systems, Inc. (OES) has added four goniometers to their expanding catalog of high precision positioning stages. The new, AK160-30 Goniometer Series feature precision ground worm gears with a 400:1 ratio and pre-loaded cross roller guides offer +/- 30 degrees of travel with 30 kg of load.
