The mid-level, general-purpose 1S Series Servos incorporate valuable input from our customers to optimize use from design to commissioning.

Lower Costs and Total Cost of Ownership
The 1S Series eliminates up to 20% of hidden servo system costs to the customer by no longer requiring separate external parts such as servodrive controller cable, terminal block for I/O, safety cable, brake relay and absolute encoder battery and cable.  Regardless of power rating, all 1S power drives have a uniform height to simplify design and improve control cabinet air circulation. We streamlined I/O connection, replacing an external terminal and cable with a pluggable connector with push-in terminals that allows wiring to be prepared separately. In the process, we increased the number and mix of supported I/O.  The end user benefits from lower maintenance costs.

Advances for High Accuracy Machines
The 1S servomotors use a gear-less/battery-less, multi-turn 23-bit absolute encoder, 16-bit multi-turn to provide accurate position input. Advanced tuning functions help shorten settling time, allowing faster production speeds and greater throughput.
Expanded Built-in Safety Capability

Machine safety for rotating hazards takes a prominent position in equipment design since the recent changes in injury liability. To help OEMs simplify safety system design and standardize on one series without stocking many separate drives, the 1S Series servodrives offer both networked and hardwired safe torque off built in. Configuration of FailSafe over EtherCAT (FSoE) only requires connecting NX Series safety control units to 1S Series servos  via open network “EtherCAT”. No wiring is required for the emergency stop of each axis for servo.
First Wave of 1S Servos

The first wave satisfies 100 W to 3 kW applications. Future releases will address power requirements of higher and lower power ratings.

KEEP YOUR WORKPLACE SAFE! – GET A ‘GOTCHA-STICK” CLICK HERE

Greenville, DE —-Motion Control Components – Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor.

The motion control FSB brakes are rated up to 100 Lb-in static torque, and fit motors up to 5.3″ OD.

Features of FSB Spring Applied Brakes:

• 12V, 24V, 90VDC or 120VAC windings
• Static torque to 100 lb-in
• Bore sizes from 1/4″ to 3/4″
• Low current consumption
• Low cost
• Metric bores & special voltages available

CLICK HERE for more information on the motion control Spring Applied Brakes from Inertia Dynamics.

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Greenville, DE -Motion Control Components – The AxCent™ (Axes for Centralized control schemes) product platform brings the proven and powerful performance expected of ADVANCED Motion Controls, with improvements to the design architecture that utilize years of experience in the industry and the latest advancements in modern servo system design.

As technology continues its shift from analog to digital, there is still strong demand for analog designs. The reason? Analog drives provide some attractive benefits:

• Simplicity – It’s easy to train your people to set the correct switch and potentiometer settings.
• Proven Track Record – AMC have been building analog drives since their inception. They have continuously improved their designs to mirror the advances in component technology.
• Performance – When tuned to maximum performance, analog current loops can often times achieve higher bandwidth and faster response than digital current loops.

How can analog outperform digital? It all comes down to the components. In a digital system, A/D conversions and processing time can add delays ranging from 20 to 100 microseconds. This may not seem like a lot, but in the highest bandwidth systems delays of this magnitude create a sizeable phase lag.

The other driving factor is cost. Large volumes and mature designs make prices attractive for everyone (except our competitors)

CLICK HERE for more information on the New AxCent Panel Mount Brush Servo Drives from ADVANCED Motion Controls

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Motion Control – The Only Internationally Certified Hazardous Location Stepper Drive Available

Vaughan, Ontario, Canada — Motion Control Components – The STAC6 offers best-in-class anti-resonance that ensures optimal performance of the step motor over the widest speed range. The drive is powered by single-phase 120 VAC which generates a nominal 160 volt DC internal bus voltage capable of driving the highest torque NEMA 34 and 42 frame step motors on the market.

Features include:

• ATEX and IECEx certified for Class I, Zone 2 locations
• UL certified for Class 1, Div 2, Group C & D locations
• HazLoc Step Motor Drive
• HazLoc certified for USA, Canada, Europe and Middle East
• Advanced anti-resonance algorithm
• Torque ripple smoothing
• Microstepping to 51,200 steps/rev
• Encoder feedback option for enhanced system accuracy using Stall Detection and Stall Prevention
• Designed for use with high quality NEMA 23, 24, 34 and 42 frame step motors
• 7 digital inputs, 3 digital outputs, all optically isolated
• 2 analog inputs, +/-10 volt range
• Supply Voltage: 94-135 VAC, 50/60 Hz, single-phase
• Input Power: 120 Vac, 1 Phase, 1.67 A (rms)
• Output Power: 120 Vdc, 1 phase, 4.24 A (rms), Continuous Duty Rating
• Control Modes: Streaming Commands, Analog Positioning, Encoder Following, Q Programming
• Output Current: 0.5-6.0 A/phase, peak-of-sine
• Communication Ports: RS-232, RS-485
• Idle Current Reduction: 0-100%
• Setup Method: Software setup
• Dimensions: 6.35 x 4.66 x 2.31 inches
• Weight: 32 oz.
• Ambient Temperature Range: -40 to +55 °C (-40 to +131 °F)
• Ambient Humidity: 90% max, non-condensing

CLICK HERE to view more information on the STAC6-Q-H Advanced Step Motor Drive for Hazardous Locations from Applied Motion Products.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Sunnyvale, CA, — Motion Control Stage – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

The VCS-1010D motion control positioning stage (pictured) features a 10 mm clear aperture and a 1 μm resolution digital position sensor, with differential quadrature outputs and a center index pulse. The highly responsive, frictionless voice coil motor has been optimized to keep the moving mass as low as possible for the fastest response times, and it has the lowest electrical noise of any motor type.

These compact 76 X 41 X 38 millimeter linear motion control stages weigh only 255 grams and can be operated horizontally or vertically. Multiple sets of mounting holes allow for easy integration into new or existing applications. These versatile VCS-10 linear positioning stages can be custom configured to meet the users requirements. As an example, is the custom VCS-1010D (pictured) with a 6mm lens and manual cross-axis adjustments.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://MotionControl-XYZ-Theta.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

AMC Extends the popular DigiFlex® Performancex product line. Their EtherCAT communication servo drives now provides for multiple feedback devices in a variety of power platforms.

Greenville, DE —– Motion Control Components – Advanced Motion Controls provides products for the fastest, most flexible form of industrial Ethernet control – EtherCAT®. High speed, deterministic control with standard 100 base-T hardware, EtherCAT Servo Amplifiers are industry proven to achieve blazing fast, consistent results in demanding applications.

Extending the popular DigiFlex® Performance™ product line our EtherCAT communication servo drives provide for multiple feedback devices in a variety of power platforms. Advanced Motion Controls EtherCAT products consist of panel mount and plug-in servo drives to allow for quick prototyping and ease of system integration. Panel mount DPE drives serve as nodes in single or multi-axis EtherCAT networks, while plug-in DZE/DZS drives utilize AMC’s unique, proprietary high speed multi-axis communication interface and I/O expansion capabilities (‘DxM’™ and ‘DxI/O’™ Technologies). Now a single EtherCAT node can accommodate a combination of up to 4 axes of motion with 32 digital inputs, 32 digital outputs, 4 analog inputs, and 2 analog outputs each. The result is a highly integrated high value motion control solution for single or multi-axis applications.

AMC’s EtherCAT Servo Drives feature:

• Four Quadrant Regenerative Operation
• Space Vector Modulation (SVM) Technology
• Fully Digital State-of-the-art Design
• Programmable Gain Settings
• Fully Configurable Current, Voltage, Velocity and Position Limits
• PIDF Velocity Loop and PID + FF Position Loop
• Compact Size, High Power Density
• 12-bit Analog to Digital Hardware
• Supports Advanced MotionControls’ ‘DxM’ Technology
• On-the-Fly Mode Switching and On-the-Fly Gain Set Switching

More information on the EtherCAT Servo Amplifiers from Advanced Motion Controls available from Servo2Go.com can be viewed at: https://www.electromate.com/advanced-motion-controls.html

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.comor visit Servo2Go.com at: www.Servo2Go.com

Applimotion Low-Profile DDR Motors for Arc Segment and Large Diameter Motion Available from Electromate!

Vaughan, Ontario, Canada — Motion Control –The Infinity Series enables OEMs to move light payloads in smooth and accurate arc-shaped and full 360-degree rotary motion profiles. Ultra-thin arc-shaped motor segments can be used individually or interconnected to create exact partial arc segment motion or full 360-degree rotary motion. Modular construction allows for virtually unlimited diameter and large through holes. This level of flexibility is not possible with conventional motor designs.

The motion control Infinity Series arc-shaped motors offer the right combination of torque, speed and smooth motion in flexible form factors and are ideal for low-profile, lightweight gimbals, broadband communication antennas, medical scanning, diagnostic imaging, inspection and metrology equipment.

Ultra-thin arc-shaped motor segments can be used individually or interconnected to create exact partial arc segment motion or full 360-degree rotary motion. Modular construction allows for virtually unlimited diameter and large through holes. This level of flexibility is not possible with conventional motor designs.

Direct drive technology eliminates the size, cost and positional errors associated with redundant bearings and gearing.

All models are compatible with a wide range of controllers and drives. Windings and form factors can be customized to meet application requirements.

CLICK HEREClick on the following link for more information on the Infinity arc-shaped motors from Applimotion.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak atsales@electromate.com or visit Electromate at: www.electromate.com

Vaughan, Ontario, Canada — Motion Control Components — JVL presents a new innovative closed-loop stepper motor technology for its NEMA 23 & 34 integrated stepper motor range from 0,1 to 12 Nm. JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control.

New Innovative Technology

JVL closed-loop integrated stepper motors, QuickStep®, provide higher torque, faster acceleration, torque control, stall free operation and quieter movements than traditional step motor systems. QuickStep do this with greater efficiency and less motor heating because motor phase current are regulated up and down according to need. Performance of JVL closed-loop steppers are similar to servo motors, but with higher torque and often without need of gearbox, resulting in a more inexpensive solution. Design safety factors have always been high for stepper motors to ensure stall-free operation – now with QuickStep closed-loop control design can be very close to the limit resulting in even lower costs. QuickStep is a true closed-loop control system that compensates step angle errors during a movement and correct errors within a full step. If load becomes too high speed is lowered and position errors will always stay within two full-steps. Smart digital design and very high update rates (36 MHz) means there is no need of any manual adjustment or setup. It works like a perfect stepper motor benefitting from the servo motor technology.

Advantages compared to open loop stepper motors

• Position feedback and control
• Fast and easy commissioning. No tuning needed
• No stalling. No step losses at all
• Torque control
• Much faster positioning and more cycles per second
• Increased efficiency and thereby much lower temperature
• Shorter settling time
• Controls higher inertias than open loop steppers
• Higher load tolerance
• More quiet operation (lower acoustic noise)
• Longer lifetime due to lower temperature
• Correct positioning without overshoot and oscillation

Advantages compared to servo motors

• Very high Torque at low speed. Often 3-4 times higher in same motor flange size
• Very high ratio-of-inertia, often up to 40:1
• Faster commissioning. No tuning needed
• Lower price. Same price as open loop steppers
• Totally stiff at standstill. Full holding torque
• Direct drive without gearbox (better and more precise torque control)
• Correct positioning without overshoot
• No oscillation
• Very short settling time

Benefit in these application from closed-loop stepper motors

• Multiple axis applications (RS485, CANopen)
• Industrial Ethernet: Profinet, EtherNet/IP, EtherCAT, Powerlink, Modbus TCP, SERCOS III
• Magnetic or Absolute Encoder Feedback
• Positioning tasks with load changes
• Applications that require quiet operation, short settling times and precision positioning

Applications include

• Winding applications
• Belt drives (start/stop, positioning)
• Dosing pumps and filler systems
• Semi-conductor mounting
• Wafer production
• Textile machines and industrial sewing machines
• Robotics
• Testing and inspection systems

More information on the JVL’s Closed-Loop Integrated Stepper Motors can be viewed at the links below-

NEMA 23 models

NEMA 34 models

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Linear Motion – LM76 Expands Custom Manufacturing Capabilities!

LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

To compliment the expanded manufacturing facility LM76 has developed a State-of-the-Art Inspection Lab as well.

Precision Shafting –

Specifiers can specify custom modifications to shafting …

RC60, 440c, 300 series Stainless Steel, and Ceramic Coated Aluminum, and other exotic materials shafting can be custom drilled, and supplied with custom ends.

For additional information go to:  

http://lm76.com/linear_shafting.htm

…  Components, and …

For additional information go to:  http://www.lm76.com/General%20PDF%20For%20Web_opt(Autosaved)PDF2.pdf

… Complete Motion Control Systems!

Custom linear motion components and complete custom linear motion systems can be designed and fabricated to meet critical specifications for tooling from Aluminum or Stainless Steel.  Discuss you needs with LM76’s talented engineers for help with any linear motion problem including USDA/FDA applications.

For Additional information go to:

http://www.lm76.com/Linear%20Slide%20Catalog%202014.pdf

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

Greenville, DE — Motion Control – Servo Drives – The AxCent™ Servo Drive (Axes for Centralized control schemes) product platform from ADVANCED Motion Controls brings the proven and powerful performance expected of ADVANCED Motion Controls, with improvements to the design architecture that utilize our years of experience in the industry and the latest advancements in modern servo system design.

Motion Control AxCent drives operate with brushless (3Φ) permanent magnet motors as well as brushed (1Φ) motors and inductive loads, and are a cost effective solution that provide high performance and simplicity.

More information on the on the motion control AxCent Servo Drives from Advanced Motion Controls can be viewed at: https://www.servo2go.com/search.php?search=Axcent&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Vaughan, Ontario, Canada –Motion Control Components – Advanced Motion Controls’ Extended Environment Amplifiers are designed to operate under harsh thermal and mechanical extremes. An expanded thermal operating range allows these drives to function in both hot and cold ambient environments, and enhanced protection against shock and vibration provides additional system ruggedness. Extended Environment drives also afford benefits for applications in more docile conditions. The superior thermal capabilities reduce or eliminate the need for cooling systems such as external heat sinks and fans, enabling system designs to be more compact and to improve overall reliability.

AMC’s Extended Environment Servo Drives feature:

• Shutdown Heat Sink Temperature
  • AZX-series: +105°C (221°F) — Hotter than boiling water!
  • DZX-series: +85°C (185°F)
• Ambient Operating Temperatures
  • AZX-series: from -40° to +85°C
  • DZX-series: from -40° to +75°C
• Complete Thermal Rise cycling in about 2 minutes
• Shock up to 15g’s at 11 msec, ½ sine
• Vibration up to 30grms on all 3 axes
• Light weight
  • AZX-series: 95 grams
  • DZX-series: 105 grams
• ~97% {max.} efficiency

Designed to assist system compliance toward:

• MIL-STD-810F – temperature, thermal shock, humidity, altitude, shock & vibration
• MIL-STD-1275D – characterization of 28Vdc systems
• MIL-STD-461E – control of electromagnetic interference
• MIL-STD-704F – aircraft power characteristics
• MIL-HDBK-217 – reliability predictions

Click on the following link for more information on the Extended Environment Servo Drives from Advanced Motion Controls.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Van Nuys, CA – Optimal Engineering Systems’ (OES) low profile, XYθ (theta) stages are designed for high precision alignment applications. These stages move in an XY-plane and rotate around the center of the XY-plane. The terms alignment table, or XY-rotation stage are often used interchangeably with XYθ, or XY-theta stage. Available in 12 models, in two precision grades, these stages have linear travels from +/- 2 mm by +/- 2 mm (+/- 0.078 in by +/- 0.078 in) up to +/- 30 mm by +/- 30 mm (+/-1.181 in by +/- 1.181 in). Additionally, XYθ (theta) stages can rotate around the center of the XY plane up to +/- 6O. Four models of the XYθ (theta) stages have solid tables that are sized from 100 mm by 100 mm (3.937 in by 3.937 in) to 200 mm by 200 mm (7.874 in by 7.874 in), and eight stages, from 250 mm x 250 mm (9.843 in by 9.843 in) to 1500 mm by 1500 mm (59.055 in by 59.055 in), are hollow core (open frame) stages.

Available in Normal and Precision grades, these XYθ (theta) stages have preloaded cross roller bearings and typical Normal Repeated Positioning Accuracy is from +/- 1.75 µm to +/- 2.5 µm, and typical Precision Repeated Positioning Accuracy is from +/- 0.7 µm to +/- 1.0 µm.

Parallelism of these XYθ (theta) Stages is as low as 30 µm, and the larger stages can handle dynamic loads to 600 kg (1323 lbs). The stages’ surfaces are treated to ensure durability and they are compatible with OES’ line of Motion Controllers. XYθ (theta) Stages can be ordered with linear encoders for closed loop operation, customized to meet specific requirements, and complete ready to run alignment systems.

Typical applications include: Panel Lamination Machinery, panel Film Laminating Machines, print Screen and 3D printing, CNC equipment, angular glass cutting & grinding equipment, wafer alignment equipment, exposure equipment, and semi-conductor equipment.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, , E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

Greenville, DE –— Motion Control – Servo2Go.com has just added remarkable new additions to its broad range of cost-effective 24V electric linear actuators from Dyadic Systems. The SCN6 series actuators are compact yet powerful integrated mechatronic cylinders that feature a motor, encoder, drive and actuator in one integral package

Dyadic Systems has developed the linear actuator drive mechanism such that the screw and nut are optimized for high accuracy, long life and low cost while delivering high speed and peak thrust. This blend of low-cost and high performance could only have been realized by the advanced technology of Dyadic Systems. These new product concepts give engineers a wider range of options to eliminate over-design.

SCN6 series Mechatronics Cylinders are available in stroke lengths to 300mm and 500N (51kgf) maximum thrust and are constructed using an extruded aluminum body with 303 stainless for the shaft and rod tip. Actuators can easily be operated via 24VDC signals from PLCs or relays, and can be connected in networks of up to 16 axes.

Servo Actuators from Dyadic feature:

• Teach pendant, PLC pendant or PC Tool Kit programmable
• +-0.1mm repeatability
• 0.3mm backlash
• 50-300mm stroke versions
• Up to 200mm/sec max. speed
• 16 discrete position program capacity
• IP40 sealed, with optional IP54 sealing
• Electric actuators – programmable in 15 minutes!
• The SCN6 starts from only $465 US/ea!
• Moves can be relative, absolute, force controlled, and more
• All actuators run on 24VDC – easy to connect to your existing power supply
• Air cylinder replacement mode and move sequencing available in the cylinder!

More information on the SCN6 series Mechatronics Cylinders available from Servo2Go.com can be viewed at: http://www.servo2go.com/supplier.php?id=1078787302

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Greenville, DE —- Motion Control Components – SWM integrated steppers from Applied Motion Products Inc. are IP65 rated drive+motor units, fusing step motor and drive components into a single splash proof and dustproof device. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions.

The SWM24 integrated steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

All SWM24 integrated steppers are RoHS and CE compliant. Features include:

• Rated IP65 for wet and dusty environments
• M12 connectors
• Anti-resonance
• Torque ripple smoothing
• Microstep emulation
• NEMA 24 frame size
• Stored programming option for stand-alone operation
• Step direction, velocity and streaming command control modes
• RS-232, Ethernet and EtherNet/IP Communication options
• Modbus/RTU for easy communication with PLC or HMI
• Built-in incremental encoder

For more information on the SWM Integrated Stepper Motors from Applied Motion Products Inc – CLICK HERE

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Vaughan, Ontario, Canada — Motion Control Components — New CSF-2UP Mini Gearheads from Harmonic Drive® are ideally suited for small robots or equipment that require an ultra-compact solution. These new models are lightweight and extremely flat.

Thanks to a cross roller bearing used at the output flange, the motion control CSF-2UP gearheads offer high-moment stiffness.

CLICK HERE to view more information on the CSF-2UP Mini Gearheads from Harmonic Drive.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Van Nuys, CA – — Motion Control –- Goniometer stages can measure angles of objects such as crystals or move an object to a precise angular position along an arc, in relation to a fixed point in space. Two goniometer stages mounted in an alpha-beta configuration (stacked) can rotate an object around a fixed point in space on a spherical surface. Optimal Engineering Systems (OES) offers stacked, precision aligned goniometer stages with a rotation center 50 mm above the upper stage. The lower (AK110-10) goniometer stage features a 65 mm x 65 mm table, ± 10O of rotation at a rate of 7O per sec. The upper (AK110-15) goniometer stage features a 65 mm x 65 mm table, ± 15O of rotation at a rate of 10O per sec. The accuracies for each unit are; repeatability: ± 4″ (240 arcseconds), typical positional accuracy: ± 9″ (540 arcseconds), and typical backlash is ± 3″ (180 arcseconds). Goniometers and stacked goniometers are used for: Identifying crystals, examining cutting edges of medical instruments, estimating hyperspectral bidirectional reflectance, gloss measurements, measurements of radiation patterns of LEDs, Directing lasers, aligning mirrors, and manufacturing of quartz oscillator plates using quartz cutting x-rays.

The precision, compact AK110-15-10 Goniometer stacked stage, available with either stepper, servo motors, optical encoders or manual adjustment knobs. It has a footprint of just 169 mm x 169 mm, and can be supplied plug-and-play with a motion controller. It is easily integrated into an inspection, testing, or manufacturing environment.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

Linear Motion Control Components

– General Catalog from LM76

To view the catalog – Click Here

To go directly to the LM76 Website – Click Here

To return to your previous please use the back arrow

Go to http://catalogs-motioncontrol.com

Van Nuys, CA – Motion Control Components – The miniature Linear Voice Coil Motor, LVCM-022-013-02, from Moticont features 5.9 oz. (1.6 N) continuous force and 18.7 oz. (5.2 N) peak force in a compact 0.875 in. (22.2 mm) diameter by 0.50 in. (12.7 mm) long. These clean, quiet, efficient, low inertia, high acceleration, high speed motors have zero cogging and feature high accuracy and high repeatability to less than1 μm (0.00004 in.) when operated in a closed loop configuration as a DC servo motor.

This motor is designed with a larger air gap of 0.059 in (1.5 mm). The larger air gap allows the motor to be used for: vibration, noise cancelation, photonics, gimbals, medical devices, semiconductor handling, SMT machines, assembly, wafer handling, optical focusing, dynamic vibration absorption, scanners and laser beam steering and filtering where excessive side play or tilt is required.

The miniature LVCM-022-013-02 linear voice coil motor has a stroke length of 0.25 in (6.4 mm) and can be easily incorporated in to new or existing applications using 4-40 UNC-2B mounting holes on each end of the motor. Other smaller and larger models as well as custom designs are available. The LVCM-022-013-02 linear voice coil motor can be ordered as a complete plug-and-play system including an encoder and controller.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

Greenville, DE — –Motion Control Components – The Ethernet IP Marquee revolutionizes the industrial market on how a marquee sign should connect and communicate on the Rockwell Ethernet/IP network. The Ethernet IP Marquee has a built in WEB server, eliminating the need to install software to program the marquee sign. Setup of the display is as simple as opening a WEB browser on your computer and entering the IP address of the marquee sign. With its fully integrated package, the Ethernet IP Marquee allows the user to configure and broadcast plc data and message information without programming communication blocks within the ladder logic code of the plc.

The product’s innovation allows the user to set up the functionality of the marquee sign and simply connect to the Rockwell plc. The messages displayed on the marquee can be alarms, machine performance, or production data. These messages are selected and displayed through internal registers from the plc. The format of these registers can be any combination of bits, words, or strings. The Ethernet IP Marquee has an additional ethernet port built into the marquee sign. This second port gives the marquee the flexibility to broadcast information to any computer on the plant network through the web server. This computer can monitor production data and collect real time information from the plant floor by simply entering the IP address of the marquee.

Also, third party spreadsheets can be used to monitor and store the information broadcasted by the marquee sign. With no software to install, the Ethernet IP Marquee stands alone as the new innovative way for a marquee sign to communicate on the Rockwell Ethernet/IP network.

More information on the Ethernet/IP Marquee from Exor Electronic can be viewed at: http://www.servo2go.com/product.php?ID=105218&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Vaughan, Ontario, Canada — Motion Control Conponents–BOGEN develops and produces high-precision variable magnetic scales and measuring systems to measure angle, distance, position.

As the available space for position measurement is always tight, BOGEN has introduced a more compact version of the magnetic measuring head IKS9. In addition to the existing design style with an 11 mm wide body, the measuring head IIKS9. is now available in 9 mm width to be used in the most confined spaces. Despite reducing the package size, the IKS9. benefits remain the same – the highest accuracy for magnetic measurements with freely selectable resolutions. The IKS9. impresses customers in automation, instrumentation and motion control applications with an extremely high accuracy and a particularly high degree of modularity

BOGEN magnetic heads comply with the relevant national and international standards (ISO, DIN, IATA, ABA, etc.) and can be used with various magnetic coercivities. Special solutions for reading magnetic ink (Magnetic Ink Character Recognition: MICR) and for recognizing and validating banknotes are also a part of their product portfolio

BOGEN has been developing and producing magnetic heads for demanding applications since 1951. Their core competence is in the design and implementation of customer specific magnetic solutions for applications such as access control in multi-storey car parks, for the detection of credit card information in ATMs or magnetic sensors for the reliable validation of bank notes.”

CLICK HERE to view more information on the high-precision variable magnetic scales and measuring systems from Bogen Magnetics

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com