MotionShop

Linear Motion Control Components

– General Catalog from LM76

To view the catalog – Click Here

To go directly to the LM76 Website – Click Here

To return to your previous please use the back arrow

Go to http://catalogs-motioncontrol.com

Van Nuys, CA – Motion Control Components – The miniature Linear Voice Coil Motor, LVCM-022-013-02, from Moticont features 5.9 oz. (1.6 N) continuous force and 18.7 oz. (5.2 N) peak force in a compact 0.875 in. (22.2 mm) diameter by 0.50 in. (12.7 mm) long. These clean, quiet, efficient, low inertia, high acceleration, high speed motors have zero cogging and feature high accuracy and high repeatability to less than1 μm (0.00004 in.) when operated in a closed loop configuration as a DC servo motor.

This motor is designed with a larger air gap of 0.059 in (1.5 mm). The larger air gap allows the motor to be used for: vibration, noise cancelation, photonics, gimbals, medical devices, semiconductor handling, SMT machines, assembly, wafer handling, optical focusing, dynamic vibration absorption, scanners and laser beam steering and filtering where excessive side play or tilt is required.

The miniature LVCM-022-013-02 linear voice coil motor has a stroke length of 0.25 in (6.4 mm) and can be easily incorporated in to new or existing applications using 4-40 UNC-2B mounting holes on each end of the motor. Other smaller and larger models as well as custom designs are available. The LVCM-022-013-02 linear voice coil motor can be ordered as a complete plug-and-play system including an encoder and controller.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

Greenville, DE — –Motion Control Components – The Ethernet IP Marquee revolutionizes the industrial market on how a marquee sign should connect and communicate on the Rockwell Ethernet/IP network. The Ethernet IP Marquee has a built in WEB server, eliminating the need to install software to program the marquee sign. Setup of the display is as simple as opening a WEB browser on your computer and entering the IP address of the marquee sign. With its fully integrated package, the Ethernet IP Marquee allows the user to configure and broadcast plc data and message information without programming communication blocks within the ladder logic code of the plc.

The product’s innovation allows the user to set up the functionality of the marquee sign and simply connect to the Rockwell plc. The messages displayed on the marquee can be alarms, machine performance, or production data. These messages are selected and displayed through internal registers from the plc. The format of these registers can be any combination of bits, words, or strings. The Ethernet IP Marquee has an additional ethernet port built into the marquee sign. This second port gives the marquee the flexibility to broadcast information to any computer on the plant network through the web server. This computer can monitor production data and collect real time information from the plant floor by simply entering the IP address of the marquee.

Also, third party spreadsheets can be used to monitor and store the information broadcasted by the marquee sign. With no software to install, the Ethernet IP Marquee stands alone as the new innovative way for a marquee sign to communicate on the Rockwell Ethernet/IP network.

More information on the Ethernet/IP Marquee from Exor Electronic can be viewed at: http://www.servo2go.com/product.php?ID=105218&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

BURLINGTON, MA –Motion Control Applications – Motion Control Components – There has been a tremendous amount of innovation lately in the design of medical devices and lab instruments. One of the critical aspects of the new products being developed is linear motion. And Steinmeyer is proud to be directly involved in providing drive solutions to our cutting-edge customers. We currently have several on-going applications involving wearable pumps driven by ball screws, and I wanted to share some of the specifics.

Implantable medical devices naturally place extreme requirements on size, materials, lifetime, and reliability. These constraints drive up cost and complexity. Incorporating all of this function into a single implantable is extremely challenging. Not only that, but servicing the pump requires major surgery!

One solution is to break down the system into two components—one implantable and one wearable. The implantable component handles minimal functionality and consists simply of a balloon. The wearable component enjoys much looser design requirements. In the projects we are working with, a wearable pump is used to drive compressed air through a catheter that passes into the body.

A wearable pump offers the advantages of being small, quiet, and very reliable. That is where precision ball screws come into play. Steinmeyer offers standard miniature screws in diameters 3 to 16 mm. The diameter typically required for this application ranges from 8 to 12 mm. Custom products can be developed as well for applications that need it. Steinmeyer ball screws also feature our proprietary super finishing process, called optiSLITE. This improves the surface quality of the shaft threads for reduced friction torque, quieter operation, and longer life.

About Steinmeyer

Steinmeyer is the world’s longest continuously-operating manufacturer of commercial ball screws. In the realm of linear motion control, our company has become synonymous with precision, innovation, and exacting standards of quality.

Steinmeyer’s extensive product line is used widely in drive systems for industrial machines as well as precision positioning in optical instruments, medical devices, and other mechatronic applications. www.steinmeyer.com

For further information on Steinmeyer our extensive product portfolio, call 1-781-273-6220 or e-mail Rosmary Belt at rosmary.belt@steinmeyer.com or visit the Steinmeyer FMD group at: www.steinmeyer.com

Vaughan, Ontario, Canada — Motion Control Conponents–BOGEN develops and produces high-precision variable magnetic scales and measuring systems to measure angle, distance, position.

As the available space for position measurement is always tight, BOGEN has introduced a more compact version of the magnetic measuring head IKS9. In addition to the existing design style with an 11 mm wide body, the measuring head IIKS9. is now available in 9 mm width to be used in the most confined spaces. Despite reducing the package size, the IKS9. benefits remain the same – the highest accuracy for magnetic measurements with freely selectable resolutions. The IKS9. impresses customers in automation, instrumentation and motion control applications with an extremely high accuracy and a particularly high degree of modularity

BOGEN magnetic heads comply with the relevant national and international standards (ISO, DIN, IATA, ABA, etc.) and can be used with various magnetic coercivities. Special solutions for reading magnetic ink (Magnetic Ink Character Recognition: MICR) and for recognizing and validating banknotes are also a part of their product portfolio

BOGEN has been developing and producing magnetic heads for demanding applications since 1951. Their core competence is in the design and implementation of customer specific magnetic solutions for applications such as access control in multi-storey car parks, for the detection of credit card information in ATMs or magnetic sensors for the reliable validation of bank notes.”

CLICK HERE to view more information on the high-precision variable magnetic scales and measuring systems from Bogen Magnetics

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

BURLINGTON, MA –Motion Control – Ball Screws – Steinmeyer, a global manufacturer of precision ground ball screws, recently introduced an enhancement to its miniature ball screw line called optiSLITE. This feature delivers lower friction torque for longer life, smoother running, and better servo response. The result is superior performance in linear axis stage applications such as atomic force microscopes, nanoscale machining, and wafer dicing.

ptiSLITE screws undergo a proprietary finishing process that removes micron-sized peaks on the shaft raceway. The result is smoother running screws which are essential in applications involving precision positioning. The high quality ball screws used are imperative to ensuring that linear stages are able to meet demanding nanopostioning requirements – extreme reliability and repeatability of 1nm.

“Many of our customers utilize Steinmeyer ball screws exclusively because they perform at world-class levels year after year” stated Bruce Gretz, Executive Vice President of Steinmeyer, Inc. “now with optiSLITE miniature ball screws, the quality and precision that our customers have come to expect will only improve.”

Like all Steinmeyer products, optiSLITE miniature ball screws offer dynamic delivery of linear motion at high standards of precision and longevity. The screws feature shaft diameters down to 5 mm and pitch down to 1 mm. Available in standard lengths and nut designs.

For more information on Steinmeyer premium ball screws please contact our engineers at infoUSA@steinmeyer.com

The Steinmeyer group is comprised of two manufacturing divisions located in Germany. August Steinmeyer GmbH & Co. KG (located in Albstadt) has been setting standards for high precision ball screws for over 40 years and prides itself on high quality, innovative designs to meet demanding customer requirements. Our Feinmess Dresden (FMD) division has been producing an extensive line of high precision positioning systems for well over 130 years.

For further information on Steinmeyer our extensive product portfolio, call 1-781-273-6220 or e-mail Rosmary Belt at rosmary.belt@steinmeyer.com or visit the Steinmeyer FMD group at: www.steinmeyer.com

New Industrial Grade Optical Encoder from Quantum Devices!

Greenville, DE —-Motion Control Components – Quantum Devices, Inc. Model QDH20 provides an improved feedback solution in applications typically using a standard size 20 package. The QDH20 provides encoder feedback in standard industrial mounting configurations with superb mechanical and environmental protection. Outputs consist of a quadrature A & B with reference pulse Z as a standard feature.

The output can be configured with either the industrial standard 5 to 26 volt OL7272 line driver or open collector outputs. The QDH20 features two heavy-duty bearing sets holding the output shaft, and two more bearings along with an integral flexible spring mount to isolate the working pieces of the encoder from mechanical stresses.

Feature include:

• 500 kHz Fundamental Frequency Response
• High Operating Temperature Option (100 C)
• Resolutions up to 5000 lines per revolution direct read
• Flange and Servo Mount Options
• 0.375″ shaft diameter
• High Noise Immunity

CLICK HERE for more information on the QDH20 Size 20 Industrial Encoder from Quantum Devices. http://servo2go.com/supplier.php?id=1057843244

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

BURLINGTON, MA –Motion Control Components – Ball Screw Technology – Steinmeyer now offers 16mm to 80 mm Ballscrews that feature Xi-Plus Technology Optimized spindle surfaces.

At Steinmeyer you obtain ball screws with connecting dimensions according to DIN 690651 or ISO 3408.

Any size can be selected among available nut flange shapes (round, single, flattened, flattened on both sides) and different load capacities.

And now you have the option to receive Steinmeyer ball screws in Xi-Plus technology with optimized spindle surfaces for better running features.

COMPARE —

Standard Ball Screws:

Microscopic irregularities on the raceway surface of the spindle can cause vibrations, irregular running characteristics, and noise in machines.

Xi-Plus technology Ball Screws:

Through the use of innovative production technologies, the roughness of the spindle surface can be reduced and therefore performance is optimized. Irregular running characteristics are virtually eliminated.

Xi-Plus ball screws deliver excellent qualities.

To view or down the Xi-Plus Ball Scew Brochure Click Here

About Steinmeyer

Steinmeyer is the world’s longest continuously-operating manufacturer of commercial ball screws. In the realm of linear motion control, our company has become synonymous with precision, innovation, and exacting standards of quality.

Steinmeyer’s extensive product line is used widely in drive systems for industrial machines as well as precision positioning in optical instruments, medical devices, and other mechatronic applications. www.steinmeyer.com

For further information on Steinmeyer our extensive product portfolio, call 1-781-273-6220 or e-mail Rosmary Belt at rosmary.belt@steinmeyer.com or visit the Steinmeyer FMD group at: www.steinmeyer.com

Vaughan, Ontario, Canada — Motion Control -Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the MR, ARC & HRC series include:

• Size 15, 20, 25, 30, 35, 45
• N, H and P accuracy grade
• V0, V1 and V2 block pre-load
• Short/Normal/Long block lengths
• Normal and Flange width styles

Lintech’s family of cost-effective short-delivery Profile Rail Linear Bearings includes:

MR Series –Miniature Profile Rail Linear Guides

featuring:

• 2 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• SS bearing, rail, and balls
• Self-lube reservoir standard

ARC Series –Standard Profile Rail Linear Guides

featuring:

• Application Rail
• 4 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• Alloy steel bearing, rail, and balls
• Self-lube reservoir optional

HRC Series– Heavy Profile Rail Linear Guides

featuring:

• Heavy Load Rail
• 4 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• Alloy steel bearing, rail, and balls
• Self-lube reservoir optional

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak atsales@electromate.com or visit Electromate at: www.electromate.com

Vaughan, Ontario, Canada – Motion Control Components – POSITAL has added an optional Profinet communications interface to its range of explosion-proof IXARC rotary encoders. These devices have been designed to comply with ATEX/IECEx directives for Category 3 electrical products and are suitable for Zone 1 and Zone 21 conditions (potential exposure to hazardous levels of explosive gases and dust concentrations). Areas of application for these encoders include oil and gas facilities, underground mines, chemical plants, milling operations and grain-handling facilities.

POSITAL’s ATEX-certified encoders are built with aluminum or Type 316L stainless steel housings that are designed to contain any electrical hot spots or sparking and to provide environmental protection ratings of up to IP67. Based on POSITAL’s well-proven optical measurement technology, these encoders can deliver up to 16-bit resolution in single-turn configurations or 14-bit resolution for multi-turn models. This technology ensures that position measurement integrity is maintained even if movement occurs when system power is unavailable. No backup batteries are needed, reducing maintenance costs. IXARC encoders can be ordered with a wide range of mounting options to ensure that they can be readily adapted to many kinds of equipment.

ATEX and IECEx Norms

ATEX and IECEx norms define essential requirements for equipment and protective systems intended for use in potentially explosive atmospheres.

Finding the right IXARC sensor for a particular application is straightforward. The web site https://www.electromate.com/posital-fraba.html provides a powerful product finder tool that enables a customer to specify the product features required for each application and then quickly zero in on the best available products.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Greenville, DE —-Motion Control Components – The PF/PFC series tin-can stepping motors are conventional magnet-driven rotary stepper motors with a permanent magnet in their rotor core. Rotating in proportion to the number of pulses sent to the motor, the stepper motor is frequency synchronized and can change speed depending on the frequency of the pulse signal.

Because of its high torque output and low profile construction, applications for tin-can stepper motors include, but are not limited to, printing, packaging, and medical devices.

PF/PFC series tin-can stepping motors are also available with optional gearheads offering increased torque in a small package. Nippon Pulse geared tin-can stepping motors can achieve up to a 2500mN·m maximum torque.

Geared motors from Nippon Pulse are well-suited for fluid dispensing, pumps, valves and a host of other applications that require high torque and smoother motion.

More information on Low-cost Tin-Can Stepper Motors from Nippon Pulse feature high torque and compact size, available from Servo2Go.com can be viewed at: https://www.servo2go.com/search.php?search=Tin-Can%20Stepper%20Motors&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Van Nuys, CA – Motion Control four-axis positioning systems are offered utilizing any of our two-axis systems like GXY-280-280-01 or GXY-280-280-02 along with our voice coil motor driven LMA series or lead screw driven LA Series linear and/or variety of rotary actuators. The Multi-Axis Positioning System is designed to allow direct coupling between the load and the drive motors. This feature eliminates backlash, allows for fast acceleration / deceleration, high speed operation while increasing the reliability.

Three-axis plus Rotary-axis System

Zero Backlash

Long System Life

Continuous Force in X and Y Directions: up to 9.3lbs (41.4 N)

Peak Force: Up to 15 lbs (66 N)

Total Travel (typical): 11 inches (25 cm) by 11 inches (25 cm)

Working Area (typical): 8 inches (20 cm) by 8 inches (20 cm)

Optional Incremental Encoder for Closed Loop Operation

High Speed and Acceleration

High Accuracy

Cog Free

High Repeatability

Closed Loop Three Phase Brushless Motor Driven

Available with Control Electronics

For PDF Data Sheet of 4 Axis Robots from Moticont – Click Here!

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low cost, low profile solution for the precise measurement of angles or the rotation of an object to a precise angular position. The AK130-15 Goniometer Stage is just 2.362 in. (60 mm) high and the height of the center of rotation is 4.724in. (120 mm). The 4.724in. x 5.118 in. (120 mm x 130 mm) table has +/- 15o of rotation at speeds up to 10 o/sec, and features a precision ground worm gear with a 304:1 ratio and a resolution of 0.0005o with a 10 micro-step per step stepper motor driver; the stage is also available with a servo motor and optical encoder. This low profile goniometer stage is ideal for: Microscopy, crystallography, measurement of surgical cutting blades, laser positioning, light measurement, and inspection applications.

Critical measurement and inspection operations are assured because of the high precision worm gear and crossed roller guides, (Repeatability of +/- 3 arcsec, Accuracy of +/- 8 arcsec, and Backlash of +/- 3 arcsec). This compact black anodized Motorized Goniometer Stage measures just 12.952 in. (329 mm) long (including the standard 1.8o stepper motor by 5.118 in. (130 mm) wide and can handle loads to 33 lb (15 Kg) of load. Mounting holes on the stage and in the base assure easy integration into an application. A calibrated indicator displays the angle of rotation, a hand knob is provided for manual adjustment, and the stage can be ordered plug-and-play with a fully compatible controller from OES.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

Low Cost, FDA/USDA/3A-Dairy Compliant Water Dog Linear Slides!

E. Longmeadow, MA Motion — Control Components – Linear Motion – FDA/USDA/3A-Dairy compliant, Water Dog Sliders from LM76 feature Corro-SlickTM coated 300 series stainless steel rails and contoured WDX Polymer blocks. Water Dog Sliders can be washed down with the most aggressive chemicals and caustic foaming agents and have an operating temperature range of – 400O to +180 OF. Quiet, low maintenance Water Dog Sliders can be used: Dry, submerged in liquids, and in refrigerated and frozen environments

The hard Rc78 Corro-SlickTM coating applied to the 300 series stainless steel rails is exceptionally corrosion and wear resistant. The coating under a microscope appears as small extremely hard spheres which results in a reduction in the coefficient of friction. The Corro-SlickTM coating which becomes an integral part of the rail is not subject to cracking or micro-fractures with deflection of the rails.

Widely used in packaging, food processing, pharmaceutical, bio-pharma, bottling, medical, and dairy industries the smooth WDX Polymer as used in Water Dog Sliders has a very low coefficient of friction, does not absorb fluids, is self lubricating, is FDA/Caustic Wash Down compliant, and prevents debris from adhere to it’s surfaces.

Water Dog sliders are available in two sizes. WD1 rail and block assemblies measures just 1.02 inches x 1.00 inches high. Standard off-the-shelf rail lengths are 12, 24, 36 and 48 in., and standard stock lengths of 157 in. are available. The WD1 blocks are 1.00 in. wide x 0.75 in. high x 4.00 in. long with two Stainless Steel anchors threaded for 1/4-20 screws. Rails are drilled on 3.15 inch centers for easy integration into a processing system and are designed for side loads up to 179 lbs and vertical compression loads of 89 lbs.

WD2 rail and block assemblies measures just 1.57 in. x 1.125 in. high. Standard off-the-shelf rail lengths are 12, 24, 36 and 48 in., and custom length to 122 in. are available. The WD2 blocks are 1.50 in. wide x 1.00 in. high x 5.250 in. long with four Stainless Steel anchors threaded for 1/4-20 screws. Rails are drilled on 3.15 inch centers and are designed for side loads up to 258 lbs and vertical down loads of 178 lbs.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

Direct Drive Linear Motors with Integrated Encoders Offer High Resolution, Speed, No Backlash, and Zero Cogging!

Van Nuys, CA – Motion Control – New, patent-pending, SDLM-051 direct drive linear motors with built-in en-coder from MOtiCOnt eliminate backlash and provide users with high acceleration, high speed, high resolution, and long life. Available in several off-the-shelf models, these direct drive linear motors feature resolutions of 5.2 µm (0.000206 in.), 1.25 µm (0.000049 in), and sub micron resolution. Compact, only 2 in. (50.8 mm) in diameter and 3.75 in (95.3 mm) long, and with the linear optical quadrature encoder inside directly connected to the shaft for the great-est possible accuracy, these motors can be easily integrated into new and existing motion control applications using threaded features on the front and rear faces of the motor, as well as each end of the shaft.

The new Motion Control SDLM-051 direct drive motors have a 1 in. (25.4 mm) stroke with a continuous force of 5.0 lbs (22.2 N) and a peak force of 15.8 lbs (70.2 N). Non-commutated, motors have zero-cogging, and the light weigh of the shaft allows for high acceleration/deceleration for higher thru-put, and direct coupling to the load increases accuracy and resolution. All  SDLM-051 linear motors are available with a spring to retract the shaft to a home position in the event of a sudden shutdown, and they can be quickly customized to meet specific automation needs.

Typical SDLM-051 direct drive motor applications include: Automated assembly, component insertion, fluid dispensing, pick-and-place, robotics, wafer handling, sorting, valve and flow control, labeling, tension control, and laser machining in the processing, manufacturing, medical, inspection, metrology and other industries.

About MOtiCOnt – MOtiCOnt is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

MOtiCOnt is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For Additional Information About These Direct Drive Linear Motors from MOtiCOnt – Click Here!

For additional information contact MOtiCOnt, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: , Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

Vaughan, Ontario, Canada — Motion Control Components –Netzer’s world-wide patented, rugged high performance Electric Encoder™ technology, suits a wide variety of applications ranging from space and avionics, through military and defense, to instrumentation and automotive. Netzer Rotary Encoders feature absolute or incremental position feedback providing analog or digital outputs..

The Non-contact, motion control absolute-position Electric Encoder™ relies on interaction between the measured displacement and an internally shielded, space/time modulated, electric field and offers features unsurpassed by traditional optical and magnetic encoders.

The DS-58 is a member of the DS series of Non-contact, absolute-position Electric Encoders™, based on Netzer Precision proprietary technology. These encoders offer many advantages, some unparalleled:

• Low profile (17 mm) & low weight
• 18bit resolution
• 0.02° accuracy
• Analog Sin/Cos, Digital SSi , or Digital AqB+I outputs
• Hollow, floating shaft
• No bearings or other contacting elements
• Low power options
• Analog or multiple digital interface options
• High tolerance to temperature, shock, moisture, EMI, RFI and Magnetic fields

CLICK HERE to view additional information on the DS-58 Absolute Encoder from Netzer Precision.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

BURLINGTON, MA –Motion Control Components Application – Steinmeyer, a global manufacturer of precision ground ball screws, recently introduced an enhancement to its miniature ball screw line called optiSLITE. This feature delivers lower friction torque for smoother running and better servo response. The result is superior positioning performance in laboratory instrument applications, such as pipetting and dispensing.

optiSLITE screws undergo a proprietary finishing process that removes micron-sized peaks on the shaft raceway. The result is smoother running screws that support the demanding requirements of delicate positioning applications.

“We understand the critical requirements of precision applications such as pipetting and dispensing,” stated Bruce Gretz, Executive Vice President of Steinmeyer, Inc. “optiSLITE miniature ball screws deliver the high performance needed in those systems to help your instruments distinguish themselves in the market.”

Like all Steinmeyer products, optiSLITE miniature ball screws offer dynamic delivery of linear motion at high standards of precision and longevity. The screws feature shaft diameters down to 5 mm and pitch down to 1 mm. Available in standard lengths and nut designs.

To go to or down the optiSLITE cataglog CLICK HERE

For more information on Steinmeyer premium ball screws please contact our engineers at infoUSA@steinmeyer.com

Steinmeyer is the world’s longest continuously-operating manufacturer of commercial ball screws. In the realm of linear motion control, our company has become synonymous with precision, innovation, and exacting standards of quality. Steinmeyer’s extensive product line is used widely in drive systems for industrial machines as well as precision positioning in optical instruments, medical devices, and other mechatronic applications. http://www.steinmeyer.com

The Steinmeyer group is comprised of two manufacturing divisions located in Germany. August Steinmeyer GmbH & Co. KG (located in Albstadt) has been setting standards for high precision ball screws for over 40 years and prides itself on high quality, innovative designs to meet demanding customer requirements. Our Feinmess Dresden (FMD) division has been producing an extensive line of high precision positioning systems for well over 130 years.

For further information on Steinmeyer our extensive product portfolio, call 1-781-273-6220 or e-mail John Skaltsas at jskaltsas@steinmeyer.com or visit the Steinmeyer FMD group at: www.steinmeyer.com

BURLINGTON, MA –Motion Control Components – Steinmeyer, a global manufacturer of precision ground ball screws, introduces a new miniature ball screw line called optiSLITE. These screws feature low friction torque that delivers smoother running and enables greater accuracy. The result is superior positioning performance in semiconductor, optics, medical instrument, and metrology applications

optiSLITE miniature ball screws are expertly manufactured in Germany like all Steinmeyer products. The ball screws undergo a proprietary finishing process that removes micron-sized defects on the shaft raceway. The elimination of these irregularities enables optiSLITE miniature ball screws to provide the highly-accurate positioning required in precision applications.

All of our miniature ball screws are meticulously engineered and manufactured to provide highly-accurate positioning,” stated Bruce Gretz, Executive Vice President of Steinmeyer, Inc. “with our smoothest raceways yet, optiSLITE miniature ball screws deliver lower friction torque and smoother operation than ever before.

Like all Steinmeyer products, optiSLITE miniature ball screws offer dynamic delivery of linear motion at high standards of precision and longevity. The screws feature shaft diameters down to 5 mm and pitch down to 1 mm. Available in standard lengths and nut designs.

To go to or down the optiSLITE cataglog CLICK HERE

For more information on Steinmeyer premium ball screws please contact our engineers at infoUSA@steinmeyer.com

Steinmeyer is the world’s longest continuously-operating manufacturer of commercial ball screws. In the realm of linear motion control, our company has become synonymous with precision, innovation, and exacting standards of quality. Steinmeyer’s extensive product line is used widely in drive systems for industrial machines as well as precision positioning in optical instruments, medical devices, and other mechatronic applications. http://www.steinmeyer.com

The Steinmeyer group is comprised of two manufacturing divisions located in Germany. August Steinmeyer GmbH & Co. KG (located in Albstadt) has been setting standards for high precision ball screws for over 40 years and prides itself on high quality, innovative designs to meet demanding customer requirements. Our Feinmess Dresden (FMD) division has been producing an extensive line of high precision positioning systems for well over 130 years.

For further information on Steinmeyer our extensive product portfolio, call 1-781-273-6220 or e-mail John Skaltsas at jskaltsas@steinmeyer.com or visit the Steinmeyer FMD group at: www.steinmeyer.com

Greenville, DE — Motion Control Components — Backlash and Torsional Rigidity are both important values to consider when selecting a high precision gearbox as they both affect lost motion (arcmin). GAM’s SPH Flange Gearbox has a single piece steel housing and ring gear machined directly inside for maximum stiffness. The helical gears are precision cut and ground for extremely quiet and smooth torque transmission with a standard backlash rating of < 3 arcmin or < 1 arcmin reduced.

The SPH series features helical gearing which brings a whole new level of power and precision to GAM’s already extensive portfolio of gear reducer technology. With special attention paid to every aspect during development, the SPH gracefully combines design and engineering, to deliver our best inline planetary gear reducer yet . For dynamic and demanding servo applications where performance is critical, the SPH is highly powerful and effi cient, yet smooth and quiet.

Download the new SPH brochure to see how the SPH Flange stacks up to other flange gearboxes available on the market when it comes to lost motion..

More information on the GAM SPH Planetary Gearboxes available from Servo2Go.com can be viewed at:http://www.servo2go.com/product.php?ID=105592&cat

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Motion Control – FDA/Dairy Washdown System

E. Longmeadow, MA – — Motion Control – Application  – Dairy machinery manufacturers are under intense scrutiny by FDA inspectors when it comes to FDA material and caustic washdown compliance. Recently, LM76 was called by a large US dairy packaging company to review a problematic portion of their filling line. After each shift, the filling line is washed-down, has a caustic foaming agent applied to kill bacteria and then is final rinsed. The caustic foaming agent was destroying – literally eating – the aluminum shaft supports while shafting exhibited pitting and showed signs of minor corrosion. Additionally, there were areas where product got trapped and these locations were havens for bacterial growth. Because this system was in-place and our customer was the end-user, LM76 engineers had to use direct drop-in replacement com¬ponents. What to do?