Motorized Stages – Motion Control Sub Micron Alignment Stages
Motorizes Stages – Motion Control – The Sub-micron, AU200-50×50 Open Aperture Alignment Stage from Optimal Engineering Systems, Inc. (OES) with a 90 mm by 90 mm open aperture is the ideal choice for applications requiring extreme precision such as: Semiconductor wafer inspection and handling, laser drilling and machining, testing, scanning, inspection, measurements, optical applications, medical diagnostic devices and instrument assembly, calibration, and inspection, 3D Printing, and alignment.
The linear travel of the X and Y axes is 50 mm by 50mm, and the resolution of each axis is 5 microns (non-micro-step) or 0.5 microns (with 10 micro-steps per step motor driver in use), the repeatability is 1.5 microns. The 1 mm per-turn lead screws and preloaded V-groove and crossed roller bearings contribute to the high precision and stiffness of the AU200-50×50 Open Aperture Alignment Stage.
The XY table measures 155 mm x 155 mm and features a precision pattern of drilled and threaded mounting holes to facilitate the addition of tooling or fixtures. This low profile black anodized aluminum XY stage is easy to integrate into new or existing systems.
The two-phase stepper motors with knobs for manual adjustments of each axis are standard for the AU200-50×50 Open Aperture Alignment Stage, however, the knobs can be replaced with 500 Cycles-per-Revolution Quadrature Optical Encoders for position verification. Compatible Multi-axis Motion Controllers are also available from OES and the AU200-50×50 Open Aperture Alignment Stage can be ordered as a complete plug-and-play system.
These stages require a Multi-axis Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, and keypad control.
About OES – Optimal Engineering Systems, Inc. (OES) is a supplier of motorized and manual Motion Control Single and Multi-axis Stages, and Motion Controllers. High precision stages from OES includes: Linear Motion Stages, Rotary Motion Stages, Goniometer Stages, Vertical axis Stages (also called Z axis Stages, Elevator Stages, and Labjacks), and Gimbal Mounts (stages). Available as Stepper Motor Stages and Servo Motor Stages, the stages are available as a complete Plug-and-Play Motion Control System with a Single or Multi axis Controller, Joystick, Keypad, and Custom Length Cables. Capable of Submicron Positioning the Servo Motor Stages can be supplied with a Brushless DC or Brushed DC Servo Motor with Quadrature Optical Encoders for closed loop applications.
Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders, identifying crystals, examining cutting edges of medical instruments, estimating hyperspectral bidirectional reflectance, gloss measurements, measurements of radiation patterns of LEDs, directing lasers, aligning mirrors, and manufacturing quartz oscillator plates using quartz cutting X-rays.
For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com
See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:
OES is now on YouTube …..https://www.youtube.com/watch?v=wdUzIagcMYc
http://MotionControl-XYZ-Theta.com
http://LinearMotionBlogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://Catalogs-MotionControl.com
Posted in 
