MotionShop

Motion Control – Open Aperture XY Alignment Stages

Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four new high resolution, high repeatability XY Alignment Stages. The AU200-120×120 Alignment Stages feature 120 mm (4.724 in.) of travel in both the X and Y axes.  These new low profile 87 mm (3.425 in.) high XY stages, have a 188 mm x 188 mm (7.401 in. x 7.401 in.) open aperture.  Easy integration of tooling and fixtures is facilitated through a precision series of threaded mounting holes.

Motion Control – Miniature Voice Coil Motor!

Van Nuys, CA – Motion Control Components – Moticont is introducing their most compact miniature hollow core linear actuator; the HVCM-016-010-003-01 Linear Voice Coil Motor, featuring a 0.125 in. (3.2 mm) open aperture and high force-to-size ratio. This miniature open aperture actuator is a true DC Linear Servo Motor. Quiet and clean, this non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration/deceleration, and high speed. Measuring just 0.625 in. (15.9mm) by 0.625 in. (15.9mm) long at mid-stroke it has a continuous force rating of 5.0 oz. (1.4 N) and a peak force of 15.7 oz (4.4 N) at a 10% duty cycle.

The open aperture of the HVCM-016-010-003-01 Linear Motor allows for optics, illumination, and laser beams. It is ideal for applications such as: Haptic feedback, medical diagnostic equipment, testing, optical focusing, positioning, laser beam steering, wafer handling, dynamic vibration absorption, laser drilling, cutting, welding, and machining applications.

Motion Control – Hybrid Si3N4 Silicon Nitride Radial Ball Bearings

E. Longmeadow, MA – Motion Control – XYZ and Theta – Deep Groove Hybrid Radial Ball Bearings featuring Si3N4 Silicon Nitride Ceramic balls from LM76 complement their broad range of linear bearings that are FDA/USDA/3A Dairy compliant. These Deep Groove Stainless/Ceramic Hybrid Si3N4 Silicon Nitride Radial Ball Bearings are ideal for the extreme environments experienced in the food, drug, and dairy industries. Capable of high speeds, high radial and axial loads, 24/7 duty cycles, and extreme sanitizing procedures such as high pressure washdown, and caustic foaming agents.

Motion Control – Cobot Screw Driving Solutions

Vaughan, Ontario, Canada — Motion Control Components — Electromate Inc., a leading distributor of industrial automation products, motion control systems and robots has announced a new partnership with Spin Robotics, a Danish manufacturer of collaborative robot (cobot) accessories. The partnership will bring Spin Robotics’ screwdriving solutions to the Canadian market, providing customers with efficient and reliable cobot solutions for screwdriving applications.

Motion Control – XYZ-Goniometer Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) is unveiling their new XYZ-Goniometer Series of Four-axes Stages.  Any of the three Goniometers Stages with +/- 10 degrees, +/- 15 degrees or +/- 45 degrees of travel can be integrated with X, Y, and Z axis stages with 15 mm, 30 mm, 50 mm, 75 mm, or larger than 100 mm of linear travel linear in any combination of X, Y, and Z axes.  These stages are the ideal choices for: Crystallography, metrology, light measurement, mirror positioning, laser scanning, drilling and machining, reverse engineering, inspection, assembly, measurements, tracking, and inspection and optical bench applications.

Motion Control – Linear Voice Coil Motor Tolerates Tilting

Van Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm).  Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control – Sleeve Type Linear Bearings

LM76 has two standard options for sleeve-style linear bearings when replacing linear ball bearings. Same format, dramatically different results.

Motion Control – Wireless HMI!

Vaughan, Ontario, Canada — Motion Control Components — Exor, a leading provider of industrial automation solutions, is proud to announce the release of its latest product, the Exor X5 Wireless HMI. This cutting-edge device is designed to revolutionize the way industrial operators interact with their machines and equipment.

Motion Control – Precision Positioning Stages!

Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes that feature high precision 1 mm per turn lead screws.  For the rotary axis a 60 mm diameter rotary table or 100 mm diameter rotary table are available.

Motion Control – Direct Drive Linear Motor

Van Nuys, CA – Motion Control Automation – Moticont’s DDLMs (Direct Drive Linear Motors) eliminate backlash and provide an economical solution for users requiring high acceleration, high speed, and long life.  They are available in three popular off-the-shelf models.  The compact DDLM-019-044-01, linear motor is only 0.75 in. (19.1 mm) in diameter and 1.75 in. (44.5 mm) long. It has a stroke of 0.46 in. (11.7 mm), and features 11.0 oz (3.1 N) of continuous force and 34.8 oz (9.7 N) peak.

Motion Control – FDA/USDA/3a Dairy Compliant Products

E. Longmeadow, MA — Motion Control Products – FDA/USDA/3A-Dairy Compliant Motion Control Components – Linear Motion – FOODSTREAM electroless Nickel plated pillow and flange blocks from LM76 are FDA/USDA/3A-Dairy compliant linear motion components.

They complement LM76’s line of FDA compliant bearings, scraper seals, and shafting. FOODSTREAM off-the-shelf pillow and flange blocks are ideal for use in processing and packaging food, producing pharmaceuticals, the BioPharma industry, and in medical devices. Inch size FOODSTREAM pillow blocks are available in single and double length sizes, and as closed or open models in sizes from .5 in. to 1.5 in. Electroless Nickel protects the aluminum base from corrosive liquids, harsh caustic wash down chemicals, and biological fluids.

Motion Control – 600 MM Vertical Lift Stages

Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm.  The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 microns, positional accuracy of 20 microns and has a knob on the motor for manual adjustment. The AT20-600-02 is driven by a Brushless DC Servo Motor with a Quadrature Incremental Encoder and the AT20-600-03 is driven by a DC Servo Motor with a Quadrature Incremental Encoder.  Each of the Servo Motor options, the -02 and -03 versions, offer higher travel speeds, increased positional accuracy, and repeatability.  The AT20-600-04 is driven by a Two-Phase Stepper Motor with a Quadrature Incremental Encoder mounted on the motor for position verification.

Motion Control – Torque Motors

Vaughan, Ontario, Canada — Motion Control Components — Tecnotion, long known as “The Linear Motor Company” entered the rotary torque motor market last year with a new design for torque motors. By new design, we mean the magnetic design is optimized for maximum flux density and copper fill to provide very high torque to volume ratios.

Manufactured in volume, these new Tecnotion Torque motors feature encapsulated windings and include two types of thermistors as standard features at very competitive pricing. Tecnotion offers motor sizes from 68mm to 160 mm diameters, to date, these motors pack serious power and will work with any servo drives in the market, or of your design.

Motion Contol – High Performance Parallelogram Voice Coil Positioning Stage

Forestville, CA – Motion Control Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control – Proportional Valve Controller Modules!

Van Nuys, CA —– Motion Control – Optimal Engineering Systems, Inc. (OES) has released eight DIN Rail Mounted Proportional Valve Controller Modules.  These compact, low weight, low cost, highly reliable, Proportional Valve Controller Modules feature both low side and high side drivers. The freewheeling flyback snubber diodes are present.  Designed for open loop operation, they are ideal for: Pressure Control Valves, Flow Control Valves, Solenoids, Actuators, Voice Coil Motors, DC Motors, and Hydraulics. The closed loop version is also available upon request. The input control signals are zero to +5 VDC or zero to +10 VDC.

Motion Control – Electric Cylinder

Van Nuys, CA – Motion Control Components – Moticont has added two linear motors to it’s SDLM Series of high speed direct drive linear motors which are also know as Electric Cylinders. These compact drives with a 1.0 in. (25.4 mm) stroke are just 1.00 in. (25.4 mm) in diameter and 3.75 in. (95.3 mm) long. These direct drive linear motors feature resolutions of 5 µm (0.000197 in.) and 1.25 µm (0.000049 in.) The integral, linear optical quadrature encoder is directly connect to the shaft for the greatest possible accuracy.

Motion Control – Single & Dual Axis Linear Slides

E. Longmeadow, MA – Motion Control – New! Precision! Low cost! “Basic Linear Motion Slides” from LM76 are available with self lubricating, MinutemanTM Series, Teflon® composite bearings or exceptionally low friction steel jacketed linear ball bearings. The “Basic Linear Slide” consist of 2 precision drilled end blocks, 2 pieces of hard chrome steel shafting, and a single 2 bearing or double 4 bearing block that is predrilled for easy, “Plug & Play,” integration into new and existing applications.

Motion Control – New Single Axis Motion Controller!

 This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

Vaughan, Ontario, Canada — Motion Control -The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models.  Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis. The DMC-3x01x Motion Controller Series feature:

Motion Control – NEW! Three-axis Gimbal Mounts!

Van Nuys, CA —– Motion Control – OES (Optimal Engineering Systems, Inc.) has released four all new Three-axis Azimuth, Angular Elevation, and Roll Gimbal Mounts. These new high precision and high stability AU270-AER Gimbal Mounts locate the surface of the Roll Stage 115 mm below the center line of rotation allowing for the positioning of: Cameras, optics, lasers and instrumentation for scanning, tracking, positioning, pointing, and other applications on their respective centerlines.

Motion Control – Miniature Linear Voice Coil Motor!

Van Nuys, CA -Motion control – Moticont Introduces their smallest linear voice coil motor! The LVCM-010-013-01 Linear Voice Coil motor is only 0.375 in. (9.5 mm) in diameter and the length at mid-stroke is just 0.81 in. (20.7 mm) long. However, this new miniature voice coil motor has a high force-to-size ratio with a continuous force of 1.0 oz (0.28 N), a peak force of 3.2 oz (0.88 N), and a 0.25 in. (6.4 mm) stroke

A clean brushless DC linear servo motor which has high acceleration/deceleration and low inertia, the LVCM-010-013-01, is highly efficient, and ideal for: Haptic feed back in medical/surgical instruments, vibration damping, work holding and clamping, laser machining and drilling, assembly, sorting, packaging, sampling, scanning, laser beam steering and filtering, wafer handling, and pharmaceutical applications.